Process finished with exit code 1073741819 0xc0000005

03.09.202203.09.2022 admin 0 Comments

Process finished with exit code 1073741819 0xc0000005

Comments

bglee85 commented Mar 19, 2019

This is my simple coding:-

import tensorflow as tf
print(«Hi»);

The «Hi» is not printed. I searched online for this issue, but seems like none of the people has this, so it has been bugging me for few days.

No GPU involved, just the CPU version of tensorflow.

I tried v1.13, v1.12, v1.11, and v.1.10, all gave the me the same issue.
I tried with python 3.5., 3.6., and 3.7.*, also same result.
Tried with LiClipse, PyCharm, Atom, all gave the same result as well.

It works before, but suddenly one day it didn’t work anymore, so I have no idea what happen.
Tried to uninstall any apps that installed within few weeks, but didn’t solve the issue.

I really wish someone can help me to solve this issue.

The text was updated successfully, but these errors were encountered:

ziruizhuang commented Mar 19, 2019

The same thing goes here. I have tried to install tensorflow through pip and tensorflow_mkl with conda. Another installation on a different machine which uses a GPU version tensorflow works just fine. Tried to remove and reinstall python environment to avoid any possible dependency issue, not working.

Since 0xC0000005 often comes from DLL importing issue on Windows, I checked the event log of Windows, the error comes from python.exe obviously, and the error module is unknown(which should be the dll name if any). The error report info goes as follows,

I checked that the CPU is Core i7-4790 which has AVX2 capability, so that it shouldn’d be a problem about AVX right?

ziruizhuang commented Mar 19, 2019

Also it worth mentioning that a custom py37-win-x64 build on branch r1.13 with cherry-pick ec72701 by VS2017 also facing the same problem. I haven’t had time to build a cpu version on the other computer, so it is unclear whether the issue is related to code or the environment (either system or python).

jvishnuvardhan commented Mar 19, 2019

@bglee85 Could you uninstall python and tensorflow, restart system and install python and tensorflow following these instructions. This procedure is for installing TF1.12 but you can follow similar procedure to install higher version of TF. Please let me know how it progresses. Thanks!

bglee85 commented Mar 20, 2019 •

I was quite urgent to use the tensorflow-gpu, so I reset my windows and reinstall everything. It works with the following conditions:-

CUDA 10.0, cudnn 7.5, python-3.6.8, tensorflow & tensorflow-gpu 1.13.1
Windows 10, i9, GTX 1050 Ti

I wish there is a better way to solve the issue without resetting the windows, but I didn’t have time to try other options one by one.

** On side note, I did try with CUDA 9.0 (installation failed), CUDA 9.2 (works fine with tensorflow 1.12 but didn’t work with tensorflow-gpu 1.12, I think is the graphic driver is higher version) and CUDA 10.1 (similar to CUDA 9.2, but works with tensorflow-1.13.1, not 1.12). All associated with the respective cudnn-7.5.

** Also, I ran the deviceQuery.exe, and the result came back with CUDA Driver Version = 10.1, CUDA Runtime = 10.0, so I tried to install the CUDA 10.1 Runtime instead, but it didn’t work on python-3.6.8, I haven’t try with python 3.7.2 yet.

I did some search online regarding to the issue of 0x000000CD, it looks like the the process wasn’t able to continue due to several issues, but some said is memory corrupted, so I could suggest uninstall the Anaconda, and reinstall everything again (I didn’t try it, but I hope it works rather than reset the windows).

Here is my entire program:

which results in:

In the first place I imported Quandl, but then I received:

ModuleNotFoundError: No module named ‘Quandl’

and then I googled it and read a suggestion to change the name to quandl.

I have installed the package in the project intercepter, there it’s named Quandl though. Anyway, it looks like at least with the lower case it passes the compilation.

I run my program on Windows 10. My Python version is 3.7. I use PyCharm.

If I try to import a different package, then it works. Quandl is the problematic one.

4 Answers 4

Trending sort

Trending sort is based off of the default sorting method — by highest score — but it boosts votes that have happened recently, helping to surface more up-to-date answers.

It falls back to sorting by highest score if no posts are trending.

Switch to Trending sort

In your case, it’s pandas causing the issue. First of all, check what platform/ABI tags pip reports on your machine:

PyPI wheels

If there is a wheel file suitable for your current platform, copy its link and run:

If pip uninstall fails, run

third-party wheels

If no wheel is available from PyPI, you may look for other wheel sources; often https://www.lfd.uci.edu/

gohlke/pythonlibs contains prebuilt wheels for Windows. Check out the list of pandas wheels available there. If a wheel matches your platform, download it and run

building from source dist

If no wheels are available for your platform, you have to build pandas from source. In this case, you need to install a C compiler (Visual C++ build tools on Windows) and run:

Be sure to install the correct Visual C++ build tools, for example, Python 3.7 requires the 2017 version, while Python 3.4/3.5/3.6 require the 2015 version. Also, make sure you have a recent setuptools version; upgrade if necessary:

It may be wise to copy and store the build log if you encounter any problems after installation, you may get a clue from warnings emitted on build.

Now install pytest and run the tests to validate the installation:

If the tests fail and you downloaded the wheel from PyPI, open a new issue in pandas ‘ Github repo as the wheel should be supported on your platform, but is isn’t. In both other cases (installing third-party wheels or building from source), you’re on your own. If you’re building from source, ask another question here, providing the full build log.

You Probably have not installed the Quandl package properly. Because I’ve tried it in Juypter Notebook before installation it gives me the same error that you are getting. But after installing the package it works fine. Please see the attached screenshot. Incase of command line installation please type the following command:

If it gives the pip installation then first you need to install pip.

Well, I use Quandl with Canopy and Anaconda (Windows and Mac) and never had any kind of problem at all. Sorry I did not see that you had already installed.

if you install quandl sucessfully, then check where it installed. Generally, default library resides in

and pip installs third party packages into

(your python dir/lib/site-packages, in my case C:/Program Files (x86)/Python37-32/lib/site-packages

you should be able to find quandl packages there, if not then you did not installed it correctly. And if you use pip in a venv(i.e, VirtualEnv- find more about venv at https://docs.python.org/3/tutorial/venv.html and pycharm uses venv by default, you’ll find the library in (your project location)/venv/lib/site-packages, which in my case, C:/Users/user/Documents/PyProject1/venv/lib/site-packages, you’ll definitely find your quandl packages there too; if not you need to re-install it. Python import mechanism is,

then you can check the paths, check for quadl installation dir, if it’s not in site-packages as mentioned earlier(which may be an exception and installation fault), update it. check PYTHONPATH in Windows

If you use pycharm then when you create a project, expand the

project Interpreter:new virtual environment, then check inherit global site-packages, then pycharm automatically import third party packages into venv site-packages.

and also you need to install anything using pip with administrator privileges in windows, otherwise pip’ll not install packages correctly. Hope this helps

After reinstalling anaconda, I set up a new Pycharm project. When I debug one of my python scripts it get this error:

This only happens when I debug. Any advice?

For reference, these are the software versions I am currently using:

Python version: 3.5
Pycharm version: 2017.3
Anaconda Navigator version:1.8.7

4 Answers 4

Trending sort

Trending sort is based off of the default sorting method — by highest score — but it boosts votes that have happened recently, helping to surface more up-to-date answers.

It falls back to sorting by highest score if no posts are trending.

Switch to Trending sort

Same problem as you Bob.

Here is my workaround (not a complete fix but it does the job) :

For example overwrite the folder C:\Miniconda3\Lib\site-packages to C:\Users\ YOUR_ACCOUNT\venv\Lib\site-packages

After that run AND debug modes are both available.

Comments

mansoorfayyaz commented Jun 15, 2017 •

Im getting following error while trying the sample code provided in pyCharm CE. Plz advise how to resolve this.

during debug i found that execution stucks at init.py at line 13

Im using the following sample code:

The text was updated successfully, but these errors were encountered:

tuxdna commented Jun 15, 2017 •

mansoorfayyaz commented Jun 16, 2017

@tuxdna
yes tried the same thru command line and got the following windows msg.

«Python has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if s solution is available.»

and then no solution was suggested.

tuxdna commented Jun 16, 2017

mansoorfayyaz commented Jun 16, 2017 •

@tuxdna Im using the same sample usage script provided in the package description. Here it is.

tuxdna commented Jun 20, 2017

In the following snippet, at which line does the process finish?

If that is the case then surely there is something breaking between jpype and JVM

mansoorfayyaz commented Jun 20, 2017

error occurs at jpype.startJVM()

After reinstalling anaconda, I set up a new Pycharm project. When I debug one of my python scripts it get this error:

This only happens when I debug. Any advice?

For reference, these are the software versions I am currently using:

Python version: 3.5
Pycharm version: 2017.3
Anaconda Navigator version:1.8.7

4 Answers 4

Trending sort

Trending sort is based off of the default sorting method — by highest score — but it boosts votes that have happened recently, helping to surface more up-to-date answers.

It falls back to sorting by highest score if no posts are trending.

Switch to Trending sort

Same problem as you Bob.

Here is my workaround (not a complete fix but it does the job) :

For example overwrite the folder C:\Miniconda3\Lib\site-packages to C:\Users\ YOUR_ACCOUNT\venv\Lib\site-packages

After that run AND debug modes are both available.

I’m trying to connect c-TreeSQL using Python. I know I have the correct driver because I can connect using George Poulose’s Query Tool

I have tried these variations and each one has crashed;

Each one of these connection strings causes a crash in PyCharm, IDLE, and the console.

I’m not sure what would be causing this

2 Answers 2

Trending sort

Trending sort is based off of the default sorting method — by highest score — but it boosts votes that have happened recently, helping to surface more up-to-date answers.

It falls back to sorting by highest score if no posts are trending.

Switch to Trending sort

you should change the field in the connection string where is for the specific value of your application.

Even tho I haven’t had the same issue like you had, here’s my fix for the error while using pyodbc and MS SQL Server:

I tried to connect to multiple databases on the same server right at the beginning of my code. When I tried connecting to a second database on the same server, my code threw this error.

What I did to fix it was to close my first connection to the server before, do the work that needed to be done, and close the connection afterwords. Then I connected to my second database and everything worked fine.

After reinstalling anaconda, I set up a new Pycharm project. When I debug one of my python scripts it get this error:

This only happens when I debug. Any advice?

For reference, these are the software versions I am currently using:

Python version: 3.5
Pycharm version: 2017.3
Anaconda Navigator version:1.8.7

4 Answers 4

Trending sort

Trending sort is based off of the default sorting method — by highest score — but it boosts votes that have happened recently, helping to surface more up-to-date answers.

It falls back to sorting by highest score if no posts are trending.

Switch to Trending sort

Same problem as you Bob.

Here is my workaround (not a complete fix but it does the job) :

For example overwrite the folder C:\Miniconda3\Lib\site-packages to C:\Users\ YOUR_ACCOUNT\venv\Lib\site-packages

After that run AND debug modes are both available.

Here is my entire program:

which results in:

In the first place I imported Quandl, but then I received:

ModuleNotFoundError: No module named ‘Quandl’

and then I googled it and read a suggestion to change the name to quandl.

I have installed the package in the project intercepter, there it’s named Quandl though. Anyway, it looks like at least with the lower case it passes the compilation.

I run my program on Windows 10. My Python version is 3.7. I use PyCharm.

If I try to import a different package, then it works. Quandl is the problematic one.

4 Answers 4

Trending sort

Trending sort is based off of the default sorting method — by highest score — but it boosts votes that have happened recently, helping to surface more up-to-date answers.

It falls back to sorting by highest score if no posts are trending.

Switch to Trending sort

In your case, it’s pandas causing the issue. First of all, check what platform/ABI tags pip reports on your machine:

PyPI wheels

If there is a wheel file suitable for your current platform, copy its link and run:

If pip uninstall fails, run

third-party wheels

If no wheel is available from PyPI, you may look for other wheel sources; often https://www.lfd.uci.edu/

gohlke/pythonlibs contains prebuilt wheels for Windows. Check out the list of pandas wheels available there. If a wheel matches your platform, download it and run

building from source dist

If no wheels are available for your platform, you have to build pandas from source. In this case, you need to install a C compiler (Visual C++ build tools on Windows) and run:

It may be wise to copy and store the build log if you encounter any problems after installation, you may get a clue from warnings emitted on build.

Now install pytest and run the tests to validate the installation:

If it gives the pip installation then first you need to install pip.

Well, I use Quandl with Canopy and Anaconda (Windows and Mac) and never had any kind of problem at all. Sorry I did not see that you had already installed.

if you install quandl sucessfully, then check where it installed. Generally, default library resides in

and pip installs third party packages into

(your python dir/lib/site-packages, in my case C:/Program Files (x86)/Python37-32/lib/site-packages

If you use pycharm then when you create a project, expand the

project Interpreter:new virtual environment, then check inherit global site-packages, then pycharm automatically import third party packages into venv site-packages.

and also you need to install anything using pip with administrator privileges in windows, otherwise pip’ll not install packages correctly. Hope this helps

I’m trying to connect c-TreeSQL using Python. I know I have the correct driver because I can connect using George Poulose’s Query Tool

I have tried these variations and each one has crashed;

Each one of these connection strings causes a crash in PyCharm, IDLE, and the console.

I’m not sure what would be causing this

2 Answers 2

Trending sort

Trending sort is based off of the default sorting method — by highest score — but it boosts votes that have happened recently, helping to surface more up-to-date answers.

It falls back to sorting by highest score if no posts are trending.

Switch to Trending sort

you should change the field in the connection string where is for the specific value of your application.

Even tho I haven’t had the same issue like you had, here’s my fix for the error while using pyodbc and MS SQL Server:

I tried to connect to multiple databases on the same server right at the beginning of my code. When I tried connecting to a second database on the same server, my code threw this error.

Process finished with exit code 1073741819 0xc0000005

Ok, I’ve been struggling a lot with what I think is a minor tweak somewhere.

Assignment is creating a jukebox which you can add albums to.

Can anyone notice anything obvious? Am I not initializing the vector? Is that really needed? THIS IS EATING ME UP

Am I not initializing the vector?

There is no need for it, the constructor will do it for you.
I can’t see any obvious problems in your code.
while (inFile >> tmpAlbum) this could be a place where things could go wrong.
Can you show this code?

I think the problem code is elsewhere (in code you haven’t posted.)

The vector member will be initialised (by its default constructor) as part of the construction of the Jukebox class. So there’s nothing you need the change about that.

0xC0000005 = Access Violation, so somewhere code is trying to access inaccessible memory. Have you got a stack trace for the crash?

The debug build can behave differently for a number of reasons. One of them is that the debug memory allocation routines will fill newly allocated memory with a file pattern, whereas the normal allocation routines don’t bother. They will be left with what ever random values were found there. So it’s good practice to initialize newly allocated memory/variables.

So, when reading from file it is supposed to read like this:

Overloaded >> is done in three classes:

song, songTime and album:

What makes it work in debug mode? It’s confusing me

I have a const char DELIM = ‘|’; in constants.h

When running it in repl.it I instead get error free(): invalid pointer.
If that makes stuff any clearer for you?

What makes it work in debug mode? It’s confusing me

Luck. Plain simple luck. It happens all the time. The code contains a bug, but sometimes if works anyway. Most programs work by accident, not by design.

One problem with memory access problems is that the bug can be in one place while the symptom shows up somewhere completely different. For this reason, you need to post your entire program for us to help.

I think the problem code is elsewhere (in code you haven’t posted.)

0xC0000005 = Access Violation, so somewhere code is trying to access inaccessible memory. Have you got a stack trace for the crash?

Very plausible!

I don’t know how to get a stack trace from CLion, I can see if I can figure something out!

Ok, I’m just dumb. I had a destructor that was just deleting the song vector everytime program ran.

Thanks for the help nodding me to the right direction, I would have just continued watching the two functions that were invloved otherwise!

I’m sure I’ll run into some more problems along the way, I WILL BE BACK!

From answers is to increase the emulator’s ram but in newest update i have no option to increase it

2 Answers 2

Trending sort

Trending sort is based off of the default sorting method — by highest score — but it boosts votes that have happened recently, helping to surface more up-to-date answers.

It falls back to sorting by highest score if no posts are trending.

Switch to Trending sort

I deleted the old emulator nexus-5x and install nexus 6 after that you can change the Emulated Performance Graphics from automatic to software it worked for me

so any emulator will work if you change to software as above

You need to check:

The RAM size of emulator is not minimum as your requirements

One more thing that I personally use: Use Pen Drive as a RAM

I’m trying to automate my work using ArcPy in PyCharm on Windows. However, when I run the following (abridged) loop, it exits at random points: sometimes at the 4th iteration, sometimes at the 31st, sometimes it manages to get to 100 but never close to the 90.000 iterations it’s supposed to!

I know from googling that this has something to do with Windows access violation errors. The regionGroup(sinks) output in the terminal is:

Where would this access violation take place?

I store every output in a separate folder for every iteration. If RegionGroup creates an own tmp-folder, I don’t know how to find it and check for issues.

I have looked at many questions on GIS Stack Exchange. There is an ArcGIS (Desktop, Engine) Background Geoprocessing 64-bit Arcpy Exit and Shutdown Patch mentioned at ArcPy 64bit giving 0xC0000005 error with PyCharm, but it is not for ArcGIS Desktop 10.7, which seems to indicate that it should be fixed in this version (but is not, apparently). Other questions are related to PyQGIS or other workflows that do not apply to mine.

EDIT: I’ve tried to run the script via the ArcGIS python directly in the console and but the error was the same. So it does not seem to be connected to PyCharm.

From answers is to increase the emulator’s ram but in newest update i have no option to increase it

2 Answers 2

Trending sort

Trending sort is based off of the default sorting method — by highest score — but it boosts votes that have happened recently, helping to surface more up-to-date answers.

It falls back to sorting by highest score if no posts are trending.

Switch to Trending sort

I deleted the old emulator nexus-5x and install nexus 6 after that you can change the Emulated Performance Graphics from automatic to software it worked for me

so any emulator will work if you change to software as above

You need to check:

The RAM size of emulator is not minimum as your requirements

One more thing that I personally use: Use Pen Drive as a RAM

From answers is to increase the emulator’s ram but in newest update i have no option to increase it

2 Answers 2

Trending sort

Trending sort is based off of the default sorting method — by highest score — but it boosts votes that have happened recently, helping to surface more up-to-date answers.

It falls back to sorting by highest score if no posts are trending.

Switch to Trending sort

I deleted the old emulator nexus-5x and install nexus 6 after that you can change the Emulated Performance Graphics from automatic to software it worked for me

so any emulator will work if you change to software as above

You need to check:

The RAM size of emulator is not minimum as your requirements

One more thing that I personally use: Use Pen Drive as a RAM

After reinstalling anaconda, I set up a new Pycharm project. When I debug one of my python scripts it get this error:

This only happens when I debug. Any advice?

For reference, these are the software versions I am currently using:

Python version: 3.5
Pycharm version: 2017.3
Anaconda Navigator version:1.8.7

4 Answers 4

Trending sort

Trending sort is based off of the default sorting method — by highest score — but it boosts votes that have happened recently, helping to surface more up-to-date answers.

It falls back to sorting by highest score if no posts are trending.

Switch to Trending sort

Same problem as you Bob.

Here is my workaround (not a complete fix but it does the job) :

For example overwrite the folder C:\Miniconda3\Lib\site-packages to C:\Users\ YOUR_ACCOUNT\venv\Lib\site-packages

After that run AND debug modes are both available.

I am trying a really simple OpenCV example in Python, which completely fails to work for me:

If I try to run it with PyCharm, I get the following error:

If I try to execute it through the terminal, it just does not seem to get past kp = sift.detect(img1_gray, None) line and does not really get to second print statement, without providing any error notification whatsoever.

I use: Windows 10, Python 3.8, opencv-python & opencv-contrib-python 4.4.0.44.

1 Answer 1

or if you choose cv2.imread :

Not the answer you’re looking for? Browse other questions tagged python opencv or ask your own question.

Hot Network Questions

Subscribe to RSS

To subscribe to this RSS feed, copy and paste this URL into your RSS reader.

By clicking “Accept all cookies”, you agree Stack Exchange can store cookies on your device and disclose information in accordance with our Cookie Policy.

I’m trying to connect c-TreeSQL using Python. I know I have the correct driver because I can connect using George Poulose’s Query Tool

I have tried these variations and each one has crashed;

Each one of these connection strings causes a crash in PyCharm, IDLE, and the console.

I’m not sure what would be causing this

2 Answers 2

Trending sort

Trending sort is based off of the default sorting method — by highest score — but it boosts votes that have happened recently, helping to surface more up-to-date answers.

It falls back to sorting by highest score if no posts are trending.

Switch to Trending sort

you should change the field in the connection string where is for the specific value of your application.

Even tho I haven’t had the same issue like you had, here’s my fix for the error while using pyodbc and MS SQL Server:

I tried to connect to multiple databases on the same server right at the beginning of my code. When I tried connecting to a second database on the same server, my code threw this error.

Comments

MENG2010 commented Oct 17, 2020

The environment has been set up.
Got this message when tried to run a python script in PyCharm.

The text was updated successfully, but these errors were encountered:

MENG2010 commented Oct 17, 2020

Found related discussions. Please check and try their suggestions.

MENG2010 commented Oct 17, 2020 •

Summarize from the above discussions. There are multiple root causes, therefore, multiple solutions. Please try the potential solutions one by one until your problem is solved.

Root cause 1. PyQt compatible feature.

Solution: disable this feature:

If this does not fix your problem, try

Solution 1. Re-install Keras, then update h5py.

Solution 2. Install/Update h5py via Anaconda navigator.

Install or update h5py via Anaconda navigator.

I believe it should be one of these two:
h5py‑2.10.0‑cp37‑cp37m‑win_amd64.whl
h5py‑2.10.0‑cp37‑cp37m‑win32.whl

If this does not fix your problem, try

Root cause 3. PyCharm Issue.

Solution: reinstall PyCharm.

Uninstall the current one and install another version. FYI, the latest version (2020, community edition) works fine on my computer.

If this does not fix your problem, try

Root cause 4. Not sure.

Solution. reinstall the conda environment and pycharm.

MENG2010 commented Oct 19, 2020

Another possible solution: use a different IDE.

mleonardalbert commented Oct 20, 2020

I am still receiving the error code after working through Causes 1, 2, and 3. By «reinstall conda environment», do you mean delete the folder from the Saturday meeting and going through it again?

MENG2010 commented Oct 21, 2020

Yes, that is what I meant.

mleonardalbert commented Oct 21, 2020

I’ve tried that a couple times now, and am still receiving the error code. I also attempted using the Eclipse Python IDE and it also gives a host of errors.

During handling of the above exception, another exception occurred:

IMPORTANT: PLEASE READ THIS FOR ADVICE ON HOW TO SOLVE THIS ISSUE!

Importing the numpy C-extensions failed. This error can happen for
many reasons, often due to issues with your setup or how NumPy was
installed.

We have compiled some common reasons and troubleshooting tips at:

Please note and check the following:

and make sure that they are the versions you expect.
Please carefully study the documentation linked above for further help.

Original error was: DLL load failed: The specified module could not be found.

Does anyone know what that error code means? I couldn’t find anything about it.

11 Answers 11

Trending sort

Trending sort is based off of the default sorting method — by highest score — but it boosts votes that have happened recently, helping to surface more up-to-date answers.

It falls back to sorting by highest score if no posts are trending.

Switch to Trending sort

reinstall python – you don’t have python33.dll in c:\WINDOWS\system32\

Maybe you have different python versions – look at folders in root of c:

If yes, then point to your version of python.exe in pyCharm > Settings > Project Interpreter

This may be due to another program locking that memory location. Before you try more drastic measures, know that restarting the computer fixed the problem for me.

The error seems to be related to issues in native code (e.g. C/C++) and might be related to issues in loading some dll file. To know which file, the Windows «Event Viewer» is your friend.

Personally I observed similar issue with matplotlib on Python 3.9 (installed using Anaconda on Windows 10). I could see this kind of error when the code was executed using PyCharm. The same code just crashed with no visible errors when starting from Anaconda console.

The Event viewer then showed issue with freetype.dll. In this case, the problem was fixed by downgrading the packege from 2.11.0 to 2.10.4:

Depending on the exact issue, I could imagine that removing pycache folder might help (like mentioned in other answers). Also, sometimes it might make sense to look at the PATH environment variable to actually understand why certain dll file is loaded from such a location.

Comments

maxmurph commented Jan 27, 2020

I have been having stability issues while using @jitclass. The latest issue relates to the program breaking unexpected while using a compiled module in Python’s interactive console. I can usually get a single function call out and then about 10-12 seconds until the entire stack is brought down with the exit code mentioned in the title.

I don’t know what further information you’ll need, but I’ll provide as much as I can.

The text was updated successfully, but these errors were encountered:

stuartarchibald commented Jan 27, 2020

Thanks for the report. Please could you provide more information about what caused this problem:

Once we have a reproducer someone can take a look and work on a fix. Thanks for your help.

maxmurph commented Jan 27, 2020

Note : My current working environment is a venv within PyCharm on Windows 10, using Python 3.7. I’ve tried running the code within the Python Console on PyCharm and on PowerShell.

stuartarchibald commented Jan 28, 2020

@intel-maxmurphy the code sample presented does not work without Numba:

there’s an out of bounds access:

It’s quite possible that this is causing the problem you are seeing.

question

in winform app after crashing the output is showing.

Exception thrown: ‘System.Data.Entity.Core.EntityCommandExecutionException’ in EntityFramework

winform is automatically closed(crashed)

This exception occurs when some specified command could not be executed. Could you provide a simple demo that can reproduce the issue?

Sorry for replying late. @KyleWang-MSFT

we are unable to replicate the issue because it was running fine previously, but few days before it started coming automatically. The issue is coming while opening a file dialog. Sometime it is running fine but sometime it is crashing.

OpenFileDialog open = new OpenFileDialog();

open.Filter = «MP4 Files (.mp4)|.mp4″;

@Adarsh-7466 What is «of»? Is it a typo «open»? Base on the code provided, it’s hard to reproduce the issue and exception. In addition, to filter mp4 files, «Filter» should be modified to «MP4 Files (.mp4)|.mp4″. And here is a thread about the exception maybe you can refer to.

1 Answer

First thing to check is your model is in sync with the database. If nothing has changed add unhandled exception handling, write to a file and report back what was recorded. I noticed you indicated this has been tried and didn’t work but it may be written incorrectly and if not this means the exception type is not caught-able which can happen.

I have a code sample that comprises of a class project for writing exception information and a simple test app on GitHub. To get both projects, create a batch file, insert the following and run.

Otherwise, under debug menu select windows, exception settings and check «Common Language runtime exceptions then rerun the app.

question details

4 people are following this question.

I wrote a programe in C++ but in debugging I encountered a problem, I’ll be glad if you can help me in this Code,The Source of the code and the error has been declaired in the following :

3 Answers 3

Trending sort

Trending sort is based off of the default sorting method — by highest score — but it boosts votes that have happened recently, helping to surface more up-to-date answers.

It falls back to sorting by highest score if no posts are trending.

Switch to Trending sort

In general, 0xcdcdcdcd is a common pattern, set by VS on uninitialized pointers in debug builds.

where these are defined in the class like this:

The following code instantiates a map, inserts objects and retrieves them:

I know, I did not locate the exact spot where the segfault occurs, but I think this approach will help you more.

EDIT: Also I think I found your problem. In Insert you make a Lookup call, which returns, if the element was not found, the size of the dir. But in Insert you never check if the value was correct. I think so.

I’m trying to make kind of a little game using c++, and I have to move a character from one point on the map to another one. When I try to do that by push_back and then erase from the source point I get this exit code. What am I doing wrong? My code for moving is:

And my main looks like that:

And this is the part of the «Game» that I’m using to create the pairs of- (coordinates, character)

Any tips on how to fix this?

1 Answer 1

If you look attentively, in the program you trying to push the character to the end:

First of all, after you push a new element in the vector, it will likely reallocate data to have enough capacity to contain one more element. So after the push_back the vector moved the data to a new location in memory. After that are trying to erase using the it_src which still points to the location before the push_back.
So, before doing this, and before calculating the it_src, you must assure vector has enough capacity and will not relocate your data

That should fix the failure.

But logically, why are you trying to move the object to the end? You change the coordinates from 1,1 to 1,2. In the vector it will be after the object with coordinates 6,4. Looks like the order in the vector is irelevant. If there is no much sense in the order of objects then it makes sense to change only coordinates, without moving it inside the vector

Comments

tatianipivem commented Sep 28, 2018

It starts properly, and run some percentage of the code, but before it reaches the end,the compiler shows me the message.

By searching on the web, I found various suggestions, like:
Try to include all the interpreters folders in the environment variables (ok, I did it but nothing changed).
Try to run as administrator (ok, I did it but nothing changed).
Try to update libraries like sklearn (ok, I did it but nothing changed).
Reinstall all libraries (ok, I did it more than once, but nothing changed).
Remove files remaining for the older packages after the packages actualization (ok, I did it ut nothing changed).

My versions are showed by the command:
from nilmtk.utils import show_versions;
show_versions()

INSTALLED VERSIONS

commit: None
python: 2.7.15.final.0
python-bits: 32
OS: Windows
OS-release: 10
machine: AMD64
processor: Intel64 Family 6 Model 69 Stepping 1, GenuineIntel
byteorder: little
LC_ALL: None
LANG: None
LOCALE: None.None

pandas: 0.23.4
pytest: 3.8.1
pip: 18.0
setuptools: 40.4.3
Cython: None
numpy: 1.15.2
scipy: 1.1.0
pyarrow: None
xarray: None
IPython: 5.8.0
sphinx: None
patsy: None
dateutil: 2.7.3
pytz: 2018.5
blosc: None
bottleneck: None
tables: 3.3.0
numexpr: 2.6.8
feather: None
matplotlib: 1.4.1
openpyxl: None
xlrd: None
xlwt: None
xlsxwriter: None
lxml: None
bs4: None
html5lib: None
sqlalchemy: None
pymysql: None
psycopg2: 2.7.5 (dt dec pq3 ext)
jinja2: None
s3fs: None
fastparquet: None
pandas_gbq: None
pandas_datareader: None
None

Date: 2018-09-28 08:24:16.589000
Platform: Windows-10-10.0.17134
System version: 2.7
nilmtk version: 0.2.1
nilm_metadata version: 0.2.2
numpy version: 1.15.2
matplotlib version: 1.4.1
pandas version: 0.23.4
sklearn version: 0.17.1
hmmlearn version: 0.2.0

Process finished with exit code 0

Do you have any suggestion on how to solve this problem?

Thank you very much,

The text was updated successfully, but these errors were encountered:

Comments

mcfarljw commented Sep 14, 2014

I’m having some troubles getting a larger files to unzip on my machine (Windows 8.1). It keeps throwing the exit code listed in the issue title. Here is one of the files I’m trying to unzip:

I recall this working a month or so ago, but I’m not entirely sure what to make of the exit code. Any thoughts?

The text was updated successfully, but these errors were encountered:

twolfson commented Sep 15, 2014

mcfarljw commented Sep 15, 2014

Great, thanks for the quick reply and pointing me in the right direction!

mcfarljw commented Sep 17, 2014

paperplane123 commented Apr 27, 2017 •

我也遇到了同样的问题，请问您最后是如何解决的
I have encountered the same problem, how do you finally solve the problem

twolfson commented Apr 27, 2017

@paperplane123 What version of Node.js are you using?

paperplane123 commented Apr 27, 2017

oh.no. I find this problem in python

twolfson commented Apr 27, 2017

paperplane123 commented Apr 27, 2017

sunshinelover commented Apr 28, 2017

paperplane123 commented Apr 28, 2017

sunshinelover commented Apr 28, 2017

paperplane123 commented Apr 28, 2017

sunshinelover commented Apr 28, 2017

Footer

You can’t perform that action at this time.

You signed in with another tab or window. Reload to refresh your session. You signed out in another tab or window. Reload to refresh your session.

Comments

schlichtanders commented Feb 2, 2017

Dear spacy-team, this might be related to #786

This bug is extremely difficult to track down. I spend 4 days trying to reduce my case into a minimal working example, however it doesn’t seem to work deterministically. I rather have the impression that certain things make it more likely that the bug occurs. I try to list all things which seems to have an influence on this:

I cannot be certain about all these points, because there was no deterministic pattern at all to be find (at least I couldn’t find it yet), and because I had not enough time to do some large statistics on the crash counts.

Still, I hope you might be able to find this weird bug.

Your Environment

The text was updated successfully, but these errors were encountered:

syllog1sm commented Feb 6, 2017

First, thanks for your patience and the effort you put into debugging this — I know memory errors can be particularly frustrating.

schlichtanders commented Feb 7, 2017

that sounds really good,
thanks you too for looking into this.

which branch is it and how do I have to install spacy/thinc such that I can test your change?

syllog1sm commented Feb 8, 2017

It’s up on the master branch of thinc now. If you do

you’ll get a file in the dist/ folder of that directory that you can pip install from your spaCy installation. It should say version 6.4.0.

schlichtanders commented Feb 9, 2017

thank you very much for the little helper script

unfortunately the py.test thinc fails. Note that I run this on windows and executed SET PYTHONPATH=»%cd%» instead of the export command.

further the build output might be of some use:

My VirtualBox virtual machine suddenly doesn’t work, instead producing an error. I don’t know what is causing this error; I searched Google for a solution, but failed. I have already reinstalled it, uninstalled, rebooted and reinstalled, but to no avail.

What can I do to solve this problem?

9 Answers 9

Trending sort

Trending sort is based off of the default sorting method — by highest score — but it boosts votes that have happened recently, helping to surface more up-to-date answers.

It falls back to sorting by highest score if no posts are trending.

Switch to Trending sort

I faced the same problem with VBox Version 5.02. for a week. (!!phew 🙁 ) I even tried Andrian Leo’s solution but it was also not working. But your solution gave me the clue as what was the problem.

When I executed your solution, I found out that, even after changing the heck keys, the same were getting reverted to its default values, which actually pointed out that I am doing something wrong.

Now I started thinking what was happening & why? I realized there is some permission issue in the execution of the Virtual Machine. I recalled that I installed the software by double clicking it & NOT by executing

, which resulted in non changing of the drivers keys.

I uninstalled the s/w & installed again with «Run as administrator» & then executed the VM.

Comments

xunhen commented Feb 23, 2019

When I run the train.py, the error has been happend:

And It’s strange that the info is repeated
My env is win10+tensorflow1.10+cuda9.2;

So how can I fix this problem

The text was updated successfully, but these errors were encountered:

tensorflowbutler commented Feb 24, 2019

Thank you for your post. We noticed you have not filled out the following field in the issue template. Could you update them if they are relevant in your case, or leave them as N/A? Thanks.
What is the top-level directory of the model you are using
Have I written custom code
OS Platform and Distribution
TensorFlow installed from
TensorFlow version
Bazel version
CUDA/cuDNN version
GPU model and memory
Exact command to reproduce

xunhen commented Mar 3, 2019

When I use the cuda10 and tensorflow1.12, everything is ok.
So I think that‘s’ my Environmental problems.
Sorry!

Footer

You can’t perform that action at this time.

You signed in with another tab or window. Reload to refresh your session. You signed out in another tab or window. Reload to refresh your session.

I am beginner in C. I got this error and I can not figure out how to fix it. I am using Code:blocks and GNU GCC compiler. It is simple matrix that has to be sorted using Shaker sort. I can not continue until i make this working. Please help me guys.

Yeah guys I had it completely wrong. Now I do not get this error anymore but I do not understand why I can not get highest number to m[r][s]. I always get the exact same matrix.

1 Answer 1

You still include the fundamental error at line 25 :

Correcting just that error, provides the following output with the matrices changing as they should. However, your sort still needs additional work. Here is an example of the output:

output:

You have been advised in the comments that the sort algorithm will require nested loops. Take a look at your sort routine and correct the logic. An example of the routine Cocktail (shaker) Sort is available in many places on the web. Another example is: Cocktail Sort Algorithm or Shaker Sort Algorithm.

After fixing your sort routine, if you still have problems, drop a comment and we will be glad to provide additional help.

Comments

zhangyi822 commented Feb 21, 2019

The text was updated successfully, but these errors were encountered:

fserra commented Feb 21, 2019

zhangyi822 commented Feb 22, 2019

I’ve re-installed python (3.6.7), but it seems doesn’t work. I’m running on a Windows 64-bit PC using the latest version of PySCIPOpt.

fserra commented Feb 22, 2019

From what you say, it doesn’t seem to be a problem of pyscipopt. the second answer on the link says something that re-installing python was not enough.

keep on googling the error

mattmilten commented Mar 4, 2019

Hey @zhangyi822, any updates on your issue? Could you resolve it?

kaloeffler commented Oct 9, 2019

I ran into the same error code when working with PySCIPOpt version 2.2.1 under Windows 10.

When I run:
import pyscipopt
pyscipopt.Model()

However, rolling back to version 2.2.0 did the trick for me.

Killajam commented Dec 28, 2020

I met this problem,too.
This error occurs when the number of my variables exceeds 10,000. I googled this error. Many people mentioned that it is related to stack overflow. How should this problem be solved?

fserra commented Dec 28, 2020

interesting. Is this a python problem or a SCIP problem? I mean, if you download some problem with many variables and read it in with pyscipopt and with SCIP standalone, do you get the same error?

Killajam commented Dec 28, 2020

interesting. Is this a python problem or a SCIP problem? I mean, if you download some problem with many variables and read it in with pyscipopt and with SCIP standalone, do you get the same error?

`from pyscipopt import Model, quicksum
import threading, gc, sys

def main():
model = Model(«transport optimization»)
model.enableReoptimization()
t = 15000

if name == ‘main‘:
sys.setrecursionlimit(1000000)
threading.stack_size(200000000)
thread = threading.Thread(target=main())
thread.start()
`

Killajam commented Dec 28, 2020

interesting. Is this a python problem or a SCIP problem? I mean, if you download some problem with many variables and read it in with pyscipopt and with SCIP standalone, do you get the same error?

`from pyscipopt import Model, quicksum
import threading, gc, sys

def main():
model = Model(«transport optimization»)
model.enableReoptimization()
t = 15000

if name == ‘main‘:
sys.setrecursionlimit(1000000)
threading.stack_size(200000000)
thread = threading.Thread(target=main())
thread.start()
`

There is still some information that needs to be added. I have debugged the above code. All the solutions can actually be output, which means that my second optimization has been solved successfully, but the program just can’t end normally,

fserra commented Dec 28, 2020

the pyscipopt code looks fine to me (no idea about the threading stuff).

can you actually generate the error from just solving one instance with scip (without threading, etc). I don’t really know how to solve this issue, nor I can reproduce it as it is apparently related to windows.

I just want to know whether you can reproduce it using SCIP standalone (I guess you must have a scip.exe somewhere) because then it is not really related to pyscipopt and you might want to send an email to the SCIP mailing list.

Killajam commented Dec 28, 2020

the pyscipopt code looks fine to me (no idea about the threading stuff).

The threading stuff part was the method I wanted to solve the stack overflow problem later, but it seemed useless. I try to solve with SCIP modeling to see if it can be solved successfully. If there is any progress, I will reply to you to communicate with you, thank you for your reply.

Comments

mansoorfayyaz commented Jun 25, 2017

My python crashes while running a simple jpype program. Im running jpype using python 3.6, 32bit with a 32bit jre on windows 10. When I run the following code, python crashes when running from command line. When I debug it in pyCharm CE, it gives the following error at startJVM()

Any solutions or suggestions?
Thanks

The text was updated successfully, but these errors were encountered:

Thrameos commented Jun 25, 2017

It looks a lot like the error that one gets when mixing 32bit and 64bit environments. Please verify that the python3.6 is 32bit in PyCharm. After that next step would be to try to capture the failure point with a debugger. Without the entry point it will be hard to trace down.

NamsooCho commented Jun 28, 2017

I has same problem.
I am running Ubuntu 16.04(64bit), OpenJDK8(64bit), Python3.5(64bit), Jpype(rebuilded).
My system had worked well.
It didn’t work suddenly yesterday, without any change except Ubuntu update.

hurcy commented Jun 28, 2017

I have same problem.
Ubuntu 16.04(64bit), OracleJDK8(64bit), Python2.7, 3.5(64bit)
This problem started couple of days before. Compiled jpype in my environment makes same problem.

Thrameos commented Jun 28, 2017

Hmm. Perhaps on of the recent patches has introduced a bug. Unfortunately, I can’t replicate this bug. If someone could be so kind as pulling the git at «07845b026af01b70f08cab54cea51068e7fe714d» and confirm if it is a recent change or something earlier. I will try to get a virtual machine to replication the problem.

Thrameos commented Jun 28, 2017

Footer

You can’t perform that action at this time.

You signed in with another tab or window. Reload to refresh your session. You signed out in another tab or window. Reload to refresh your session.

Comments

denisgl7 commented Aug 19, 2020

Has anyone tested their Windows applications with a new SDK?

The text was updated successfully, but these errors were encountered:

aclipski commented Aug 19, 2020

Yes, this is the same thing we’re experiencing in our game:

waveofthought-code commented Sep 26, 2020 •

aclipski’s issue looks to be my issue as well, but in my case i’m using Starling, not Away3D. From my Event Viewer:

Faulting module path: C:\WINDOWS\system32\d3d11.dll

ajwfrost commented Sep 28, 2020

denisgl7 commented Sep 28, 2020

I would try with a new DLL

aclipski commented Sep 28, 2020

Yes, an updated DLL would be fantastic!

ajwfrost commented Sep 29, 2020

aclipski commented Oct 2, 2020

@ajwfrost Sorry, I’m just now getting around to trying this out. I’m assuming this goes into runtimes/air. It looks like this is a 32-bit DLL so it would go into the win folder?

Our game runs in 64-bit on Windows, so would there be a way to get a 64-bit version of this DLL as well?

Comments

Creepercdn commented Mar 27, 2020

The text was updated successfully, but these errors were encountered:

chninkel commented Apr 1, 2020 •

Same issue
python 3.7 x64
pyo cp37 amd64
windows 10

work perfectly on linux

edouin commented Apr 13, 2020

Same.
python 3.7 x64
windows 10

Creepercdn commented Apr 13, 2020

i use
Anaconda3 2019.10
windows 10

Creepercdn commented Apr 14, 2020

windows 10 python3.8.2 also can’t work

Creepercdn commented Apr 14, 2020

SteveMaybe commented Apr 19, 2020

I’m not sure why its happening, but I was able to work my way into a fix.

and take note of a few potentially valid output devices. In my case it was device 79. The default device is 0, which for me was causing another issue causing a crash.

Next configure the following script with one of the devices you selected above

Hope this helps!

Creepercdn commented Apr 19, 2020

I will try that. My computer install so much virtual audio/midi drivers.

Creepercdn commented Apr 19, 2020

Not working too. Errorlevel:-1073741819
MME Output Device(virtual) in device list sample rate:44100hz, but audio settings is 48000hz. virtual audio device panel also set sample rate is 48000hz.
WASAPI Output device sample rate all is 48000hz
WDM-KS OUTput device sample rate same as MME.
I can’t find DirectSound device in device list.
WASAPI can’t use. It error:
Portaudio error in Pa_OpenStream: Invalid device
Pyo error: From portaudio, Invalid device
Portaudio error in Pa_CloseStream (pa_deinit): PortAudio not initialized
Portaudio error in Pa_Terminate (pa_deinit): PortAudio not initialized
Pyo error:
Server not booted.

Creepercdn commented Apr 19, 2020

I will test pyo in WSL.

SteveMaybe commented Apr 19, 2020 •

If that fails to run, can you share the output from the following script

From the output, what device numbers did you try?

Creepercdn commented Apr 20, 2020

belangeo commented Apr 20, 2020

Creepercdn commented Apr 20, 2020

belangeo commented Apr 20, 2020

Well, I can see anything but unplugging your devices one by one until you find the one that prevent pyo’s Server from booting.

Comments

Quebradawill commented Jul 29, 2020 •

I have 65 training images, when I train the model, I encountered such errors, what does it mean?

Epoch 1/5: 100%|██████████| 49/49 [21:57

The text was updated successfully, but these errors were encountered:

milesial commented Jul 29, 2020

I don’t think this has to do with this repo. Have you reached a memory limit?

Quebradawill commented Jul 29, 2020

I don’t think this has to do with this repo. Have you reached a memory limit?

I don’t know, how to show memory limit?

milesial commented Jul 29, 2020

You can look this up in your favorite search engine.

wzyjhm commented Sep 24, 2020

INFO: Using device cpu
INFO: Network:
3 input channels
1 output channels (classes)
Bilinear upscaling
INFO: Creating dataset with 40 examples
INFO: Starting training:
Epochs: 5
Batch size: 1
Learning rate: 0.0001
Training size: 36
Validation size: 4
Checkpoints: True
Device: cpu
Images scaling: 0.5

Epoch 1/5: 0%| | 0/36 [00:00

milesial commented Aug 16, 2021

Closing, as this issue is now outdated after the recent code refactor.

Footer

You can’t perform that action at this time.

You signed in with another tab or window. Reload to refresh your session. You signed out in another tab or window. Reload to refresh your session.

Process finished with exit code 1073741819 0xc0000005

I am running my program at Pycharm 2019.3.5.

I found out that this error will occur whenever I use software called Matlab.

This error will disappear once I restart my device, and will occur again if I use Matlab.

Sorry that I cannot share my program, as it is combination of few files and with GUI also.

I manage to find out the error part.
So far my findings are:
1. parallel_config and series_config are QSpinbox.
2. The code will crash when it try to read from data frame or some previous calculation.
3. The code will crash if I setValue to read directly a value but not from calculation or data frame.

The above findings will only valid or occur, when I run parallel with Microsoft Power Point with Empower add-in.
If I run my code without the power point, the program will not crash for both mentioned code above.
The error somehow related to QSpinbox of setValue.

Please give me some hints if possible.
Thanks.

Comments

hsw409328 commented Jan 4, 2018

The text was updated successfully, but these errors were encountered:

ShawnMilo commented Jan 4, 2018

This needs more detail. Can you provide your code and (if applicable) an XLSX file so we can reproduce this?

hsw409328 commented Jan 8, 2018

a := []map[string]interface<><>
a = append(a, map[string]interface<><"bt": "bbbb", "xm": "xxxxxx", "erp": true>)
a = append(a, map[string]interface<><"bt": "bbbb", "xm": "xxxxxx", "erp123": 21112>)
var wg sync.WaitGroup
wg.Add(1)
go func() <
excelOjbect := new(utils.ExportExcel)
excelOjbect.FilePath = «D:/Go/project/src/XXXXX/logs/test.xlsx»
excelOjbect.HeadArr = []string<"title", "name">
excelOjbect.FieldArr = []string<"bt", "xm", "erp">
excelOjbect.Data = a
_, err := excelOjbect.Run()
log.Println(err)
time.Sleep(time.Second * 5)
wg.Done()
>()
wg.Wait()

var (
excelLock = new(sync.Mutex)
)

Does anyone know what that error code means? I couldn’t find anything about it.

11 Answers 11

Trending sort

Trending sort is based off of the default sorting method — by highest score — but it boosts votes that have happened recently, helping to surface more up-to-date answers.

It falls back to sorting by highest score if no posts are trending.

Switch to Trending sort

reinstall python – you don’t have python33.dll in c:\WINDOWS\system32\

Maybe you have different python versions – look at folders in root of c:

If yes, then point to your version of python.exe in pyCharm > Settings > Project Interpreter

This may be due to another program locking that memory location. Before you try more drastic measures, know that restarting the computer fixed the problem for me.

The error seems to be related to issues in native code (e.g. C/C++) and might be related to issues in loading some dll file. To know which file, the Windows «Event Viewer» is your friend.

The Event viewer then showed issue with freetype.dll. In this case, the problem was fixed by downgrading the packege from 2.11.0 to 2.10.4:

Clion error while running c++ project

I have a project in C++ which I made myself and I am experiencing a strange error. About 50% of the times I run the project I get an error

I have no idea why this happens. I am simply running a Dijkstra algorithm which I made myself and printing a couple of lines to the console. The data never change and I am only using a few bytes of memory. I don’t understand why does the project manage to run sometimes, and sometimes gives me an error.

1 Answer 1

Your graph can have up to 9 verticies:

I assume that this means that any particular vertex can have a value from 0 to 8 since the code seems to use the vertex as an index into various vectors.

But you index it with various elements vertex value later:

I think you may be going past the end of the previousVertex vector. I don’t know why you’re having trouble catching this in a debugger if it crashes 50% of the time.

Does anyone know what that error code means? I couldn’t find anything about it.

11 Answers 11

Trending sort

Trending sort is based off of the default sorting method — by highest score — but it boosts votes that have happened recently, helping to surface more up-to-date answers.

It falls back to sorting by highest score if no posts are trending.

Switch to Trending sort

reinstall python – you don’t have python33.dll in c:\WINDOWS\system32\

Maybe you have different python versions – look at folders in root of c:

If yes, then point to your version of python.exe in pyCharm > Settings > Project Interpreter

This may be due to another program locking that memory location. Before you try more drastic measures, know that restarting the computer fixed the problem for me.

The error seems to be related to issues in native code (e.g. C/C++) and might be related to issues in loading some dll file. To know which file, the Windows «Event Viewer» is your friend.

The Event viewer then showed issue with freetype.dll. In this case, the problem was fixed by downgrading the packege from 2.11.0 to 2.10.4:

Comments

comes04 commented Jul 9, 2021

I’m using the following code to record audio from 2 different devices:

what happens is that after a minute or so i get the following on terminal and everything stops:

I’m using Windows, and I try to run this same script in other windows with the same result.

¿Could anyone help me with this?

The text was updated successfully, but these errors were encountered:

mgeier commented Jul 9, 2021

I’m getting this error when running the code:

When I move the definition of audio_q up a few lines, the script works for me (on Linux, I of course also had to change rec_dir ).

HaHeho commented Jul 11, 2021

I’m getting this error when running the code:

When I move the definition of audio_q up a few lines, the script works for me (on Linux, I of course also had to change rec_dir ).

I did not have that problem on Windows. Interesting that the behavior seems to be different. But that’s a minor detail.

HaHeho commented Jul 11, 2021

@comes04 I’ve built this. Probably over-engineered, but it seemed to me like the most flexible solution, allowing for an arbitrary number of recording streams (in theory). It also allows for KeyboardInterrupt at any time, while leaving the handling of the desired recording length outside of the audio thread.

Note that the resulting recordings might not be in perfect sync on a sample basis. Also the resulting length is probably not exactly duration * fs (but plus minus a few samples). But I suppose that is not really relevant for your application?

comes04 commented Jul 13, 2021

mgeier commented Jul 13, 2021

Thanks @HaHeho for this nice example!

The try block in run() is superfluous, though, because the KeyboardInterrupt will not be raised in that thread.

And when I tried it, flush=True didn’t make a difference. Are you sure that it is needed?

HaHeho commented Jul 14, 2021

YW. I wanted to contribute an example with a class that derives from Thread (or Process would work in a very similar manner), since it provides a straightforward foundation. In this way, any kind of processing or behaviour can be implement in an encapsulated way. And the class instance can be easily controlled from outside.

The try block in run() is superfluous, though, because the KeyboardInterrupt will not be raised in that thread.

I thought it would be good idea, in case the mother script dies for some reason. Why do you think it should be avoided?

And when I tried it, flush=True didn’t make a difference. Are you sure that it is needed?

I’ve put it since logging to the same console from multiple threads can scramble the message order up (obviously). I used to put very brief sleep() times in-between to reliably get a sensible logging behavior. That is very not elegant of course, so I thought to try with flush. But I’m not really sure if I was using it correctly there anyways. What would you suggest for a good practice?

mgeier commented Jul 14, 2021

[. ] with a class that derives from Thread [. ], since it provides a straightforward foundation.

It works fine, but I don’t really like how you are changing the semantics of the join() method.

I think something like stop() would be clearer.

And I think encapsulation would be better in this case, or is there a reason to expose the inherited Thread API?

And it would be even better if the class were a context manager!

I thought it would be good idea, in case the mother script dies for some reason.

Well in that case the thread would be forcibly stopped, probably still trying to access stuff that doesn’t exist anymore.

It might work fine in many cases, but I think not relying on that is generally a better idea.

If you want to handle the case of the main thread dying, you should make your class a context manager, then the threads will be correctly terminated even if the main thread throws an exception.

Why do you think it should be avoided?

I don’t really have a concrete reason, just an ominous feeling.
But a controlled shutdown is in general better than a forced shutdown under dubious circumstances, right?

I remember having problems with detached threads in C++.
In Python it’s certainly not that bad, but still, I would avoid it unless I have a good reason to use it.

And when I tried it, flush=True didn’t make a difference. Are you sure that it is needed?

I’m not sure either.
I just wanted to know whether you actually observed scrambled messages or whether you just included it out of a whim.

The problem (or rather, one of the problems) is that the behavior is very likely platform-dependent.

In general, I think it’s best just to not use print() from different threads at the same time.
For a small code example this doesn’t really matter, but in a real application I would probably do any logging via a queue?
Or probably use https://docs.python.org/3.8/library/logging.html (but I don’t really have experience with that, I don’t know how well this works with multiple threads)?

mgeier commented Jul 14, 2021

BTW @HaHeho, do you want to add this example to the official examples?

HaHeho commented Jul 14, 2021

It works fine, but I don’t really like how you are changing the semantics of the join() method.

I think something like stop() would be clearer.

And I think encapsulation would be better in this case, or is there a reason to expose the inherited Thread API?

And it would be even better if the class were a context manager!

Yeah, a context manager would be handy as well. And actually more intuitive and safer (as you describe with unexpected exits later). In that case one would not even derive from Thread but implement one inside the class, I suppose? In this way, the Thread API wouldn’t be exposed either.

My idea was rather to extend the functionality of Thread (hence the derivation) i.e., to also use it exactly as if it were one (which was natively does not provide to be used in a context). This would’ve been much clearer however when actually naming the class RecorindThread or such.

Nevertheless, doing both would be quite easy. I did not bother to even implement a stop() method there, since the provided functionality in that example was so simple. When building a proper example, that should be done, of course.

And when I tried it, flush=True didn’t make a difference. Are you sure that it is needed?

I’m not sure either.
I just wanted to know whether you actually observed scrambled messages or whether you just included it out of a whim.

The problem (or rather, one of the problems) is that the behavior is very likely platform-dependent.

BTW @HaHeho, do you want to add this example to the official examples?

Well that could be useful, don’t you think? Of course not in it’s current form.

I’m trying to write a program for my C Programming class. The error in the title keeps popping up after I run the program with zero errors and warnings. Here’s my code

3 Answers 3

Trending sort

Trending sort is based off of the default sorting method — by highest score — but it boosts votes that have happened recently, helping to surface more up-to-date answers.

It falls back to sorting by highest score if no posts are trending.

Switch to Trending sort

3) Change return

scanf(«%d», total); should be scanf(«%d», &total);

Also it doesn’t make much sense to read in a value for total in the scanf() call only to completely ignore it and overwrite the value by calling:

Another problem is that you use the variable calorie without ever initializing it in the calorie() function:

I’m also surprised that your calorie() function definition even compiles since none of the identifiers within the parens are types. But I find that it compiles for me, so what do I know (I guess it’s implicit int rearing its ugly head)?

Does anyone know what that error code means? I couldn’t find anything about it.

11 Answers 11

Trending sort

Trending sort is based off of the default sorting method — by highest score — but it boosts votes that have happened recently, helping to surface more up-to-date answers.

It falls back to sorting by highest score if no posts are trending.

Switch to Trending sort

reinstall python – you don’t have python33.dll in c:\WINDOWS\system32\

Maybe you have different python versions – look at folders in root of c:

If yes, then point to your version of python.exe in pyCharm > Settings > Project Interpreter

This may be due to another program locking that memory location. Before you try more drastic measures, know that restarting the computer fixed the problem for me.

The error seems to be related to issues in native code (e.g. C/C++) and might be related to issues in loading some dll file. To know which file, the Windows «Event Viewer» is your friend.

The Event viewer then showed issue with freetype.dll. In this case, the problem was fixed by downgrading the packege from 2.11.0 to 2.10.4:

Comments

fzumstein commented Jul 17, 2018

The text was updated successfully, but these errors were encountered:

thopiekar commented Jul 18, 2018 •

It is only guessing but dt.datetime.now() returns a DateTime object and wb.Worksheets(«Sheet1»).Range(«A1»).Value most likely doesn’t understand it. Make sure you pass a data format, which this value understands. E.g. an integer or something similar.

fzumstein commented Jul 18, 2018

Setting the value is working fine (it automatically formats the target cell as date cell in Excel). It’s only the last line which fails, but that was handled correctly from python 2.6-3.6 (it returns a ), only 3.7 is causing issues.

thopiekar commented Jul 18, 2018

Oh, well, then this is worrying, of course.

idle-user commented Jul 18, 2018 •

Just to add on.I’ve been getting similar errors when dealing with datetime in objects.

I also noticed that I have to correctly case attributes to get the value.

There’s other little things I had to change to get it kinda working, but the date one just breaks my code.
All of this was working fine before 3.7.

cgohlke commented Jul 20, 2018

Works for me with binaries from https://www.lfd.uci.edu/

fzumstein commented Jul 20, 2018

Great, thanks! Can we fix the pypi version accordingly.

thopiekar commented Jul 21, 2018

Well, I find it more interesting what the differences are? Whether they made changes to the code or not. 😏

cgohlke commented Jul 21, 2018

I was using git master, the following patch, Visual Studio 2017, and Windows SDK 8.1. You’ll also need python/cpython#8271 or another workaround.

thopiekar commented Jul 21, 2018

Could you be so kind an prepare a pull request with these changes?
It would help a lot.

Also @mhammond can review it more easily here and our CI can test whether it really builds. So we know there are no typos.

Finally, when you make changes and it gets merged, then you get the credits here on the repo for your work, of course.

I am trying to create an AVL Tree and insert a node into it. Whenever I try to add a data value ın the tree node, my program crashes and returns the value 0xC0000005. This is how I have introduced the data item in the header file:

Whenever I try to run the following lines of the code in the insert function, I get the crash.

I don’t know what I’m doing wrong, please help me.

2 Answers 2

Trending sort

Trending sort is based off of the default sorting method — by highest score — but it boosts votes that have happened recently, helping to surface more up-to-date answers.

It falls back to sorting by highest score if no posts are trending.

Switch to Trending sort

This line of code sets nw to be a null pointer, in other words, it doesn’t point at anything. Trying to dereference a null pointer will result in undefined behaviour. You need to allocate memory for an AVLTreeNode object, and then get nw to point at it.

What you need instead is this, which allocates memory and points nw at it:

And remember, whenever you allocate memory with new you need to deallocate it when you’re finished with it:

First I would like to thank you for an amazing tutorial-series – it is highly appreciated.

After having searched for this error I have performed the following steps that were suggested from various sources:

None of these actions seem to resolve the issue. When looking in EventViewer, the application error is somehow related to Qt5.Widgets.dll. I added more debug lines in node_graphics_view.py to try to get an idea of where the code crashes. A normal set of actions looks as shown in norm_log.txt. The abnormal one (where the crash happens) is shown in crash_log.txt.

When comparing these two logs it seems that the crash happens in the overridden mousePressEvent (node_graphics_view) right after returning from leftMouseButtonPress. These actions look identical up to the crash. I get similar issues with the Calculator example. Have you encountered this issue before? The error 0xC0000005 could indicate RAM issues but the memory diagnostic cannot find any errors.

Do you have any suggestions?

2 Answers 2

Trending sort

Trending sort is based off of the default sorting method — by highest score — but it boosts votes that have happened recently, helping to surface more up-to-date answers.

It falls back to sorting by highest score if no posts are trending.

Switch to Trending sort

0xC0000005 is the error code for an Access Violation exception. Windows throws that exception when code tries to access invalid memory.

Might be maximum storage of int variables, I do java, but there is something similar.

Not the answer you’re looking for? Browse other questions tagged c++ codeblocks or ask your own question.

Hot Network Questions

Subscribe to RSS

To subscribe to this RSS feed, copy and paste this URL into your RSS reader.

By clicking “Accept all cookies”, you agree Stack Exchange can store cookies on your device and disclose information in accordance with our Cookie Policy.

Как понять причины аварийного завершения программы?

Имеется программка для работы с БД. При запуске отображается таблица, куда выводятся данные из базы. Если закрыть программу, то с вероятностью, примерно, 20% она вылетит, т. е. Windows покажет сообщение по проблеме:

Имя события проблемы: APPCRASH
Имя приложения: python.exe
Версия приложения: 0.0.0.0
Отметка времени приложения: 5676ff9a
Имя модуля с ошибкой: QtGui.pyd
Версия модуля с ошибкой: 0.0.0.0
Отметка времени модуля с ошибкой: 55a8cb2e
Код исключения: c0000005
Смещение исключения: 0000000000233440
Версия ОС: 6.3.9600.2.0.0.256.48
Код языка: 1049
Дополнительные сведения 1: 3733
Дополнительные сведения 2: 373373bfbcbe3a555910936d40bbcd4c
Дополнительные сведения 3: f4cb
Дополнительные сведения 4: f4cbefe822d4eff4175ddc99fca5ba47

Для закрытия главного окна программы у меня используется функция CloseEvent:

Я использую PyCharm. Можно как-то в нем сделать, чтобы ошибки более конкретно описывались, чтобы понять их причину?

Does anyone know what that error code means? I couldn’t find anything about it.

11 Answers 11

Trending sort

Trending sort is based off of the default sorting method — by highest score — but it boosts votes that have happened recently, helping to surface more up-to-date answers.

It falls back to sorting by highest score if no posts are trending.

Switch to Trending sort

reinstall python – you don’t have python33.dll in c:\WINDOWS\system32\

Maybe you have different python versions – look at folders in root of c:

If yes, then point to your version of python.exe in pyCharm > Settings > Project Interpreter

This may be due to another program locking that memory location. Before you try more drastic measures, know that restarting the computer fixed the problem for me.

The error seems to be related to issues in native code (e.g. C/C++) and might be related to issues in loading some dll file. To know which file, the Windows «Event Viewer» is your friend.

The Event viewer then showed issue with freetype.dll. In this case, the problem was fixed by downgrading the packege from 2.11.0 to 2.10.4:

Русские Блоги

Процесс Java Intellij Idea завершился с кодом выхода 0xc0000005 вопрос

Intellj Idea недавноОбновление до 2018.3.5Позже я открыл ранее написанную программу и обнаружил, что после запуска метода Main примерно через 3-5 секунд программа завершилась ненормально.

Потратив много времени, я удалил и переустановил jdk1.8 и переустановил jdk 10. Я обнаружил, что проблема не решена.

Он сказал, что это может быть связано сПеревод Kingsoft PowerWordСвязанный! Я решительно выключил Kingsoft PowerWord и попробовал. В результате даже Idea автоматически закрылась. Повторное открытие Idea будет нормально! Позже я повторно открыл перевод PowerWord и несколько раз пытался, и это действительно было связано с переводом PowerWord! (Предполагается, что он должен конфликтовать с сочетанием клавиш для перевода. После выбора сочетания клавиш без двойного щелчка Ctrl указанная выше проблема исчезнет)

Спасибо большим ребятам из вышеупомянутого сообщения и надеюсь, что каждый, кто столкнулся с этой проблемой, сможет вовремя найти ее, поэтому я в основном переформулирую содержание этого сообщения, чтобы распространить его.

TLDR: Both IDE and compiler missed an error in code, it only got reported by this exit code.

After a minor edit to my code regarding virtual methods, I got the error above seemingly out of nowhere. Translating the exit code to hex gives 0xc0000005, an access violation. Same problem is being solved here and here. According to those discussions, this may be caused by cl.exe being unaccessible for whatever reason, those reasons however do not apply in my case (I checked).

Another cause mentioned somewhere (I lost the link) is an error in project-specific settings. My other projects compiled with no problems, so I tried to fix that. Even when I created a new (copy of this) project, it worked. When I however moved all headers and sources to this new project, it started doing the thing again.

1 Answer 1

I tried to go back to where the error suddenly started appearing, and I found it. I am not sure how, but this error was caused by an incorrect piece of code I had written.

One of my headers contained two classes, one of which (base) was stand-alone as it was, but the other (derived) also provided a specific wrapper for it. Both had an identical method (same name and parameter list), which is probably not the best approach, but it seemed to compile with no problems.

Then I decided to add an interface-like (abstract) class for convenience and the error started appearing.

Do You see the obvious mistake I am making here?

ArcPy 64bit giving 0xC0000005 error with PyCharm

I have a simple script, which converts raster to shapefile and merges all the shapefiles. It does not really matter. The execution is fine, everything finishes but:

I am using PyCharm Community 2018.1, when the script finishes I get a window with:

which I have to click and close and after that I get an error in PyCharm which says:

If I run the script on another computer with same setup, same copy of python, everything works just fine and PyCharm says:

Process finished with exit code 0

I tried a clean install of ArcPy 10.6 x64 background GP, copy the python installation from other PC, same error.

If I make an error in script, where it exits, there is also the traceback + again the same error:

On the other computer it says:

What is funny, if I use 32 bit interpreter, it works just fine. But this is a workstation and I don’t really want to use 32 bit version.

Any ideas how to solve the issue?

Sample of script (as I said, eveything here finishes and I get my final shapefile):

virtualbox.org

End user forums for VirtualBox

by diegomonte » 28. Dec 2018, 19:06

Result Code: E_FAIL (0x80004005)
Component: MachineWrap
Interface: IMachine <85cd948e-a71f-4289-281e-0ca7ad48cd89>

by andyp73 » 28. Dec 2018, 19:46

by Necco » 5. Jan 2019, 02:39

Perhaps I can help with that.

I’m facing a similar problem running Virtualbox under Windows 10. Happens with both 5.2.22-126460 and 6.0.0-127566. Windows is fully up to date

I ran a full sfc scan, didn’t help. I tried reinstalling virtualbox (both with and without «Run as Administrator) and it didn’t help. I did have Hyper-V recently installed on this system, but I did completely remove all Hyper-V features before installing Virtualbox.

Result Code: E_FAIL (0x80004005)
Component: MachineWrap
Interface: IMachine

by socratis » 5. Jan 2019, 10:46

@Necco
You’re not helping with the OP’s case, but, you might help yourself, just because you posted the requested log.

Generally speaking (and if you run into this again), read really carefully the following FAQ: Diagnosing VirtualBox Hardening Issues for some generic guidelines/ideas. Remember, these are guidelines, not the exact solution, you have to use your judgement as to which program might be responsible.

In your case you have the following (known) culprit:

by Necco » 8. Jan 2019, 03:03

Well, I feel silly. I spent more time looking at the end of the log file and missed the mention of Cylance.

Thank you! I’ll look into how Cylance might be blocking it.

by Necco » 10. Jan 2019, 20:23

I was able to add an exception to Cylance to prevent it from blocking it. I had to get the SHA256 hash of VirtualBoxVM.exe and add it to the Policy Safe List for my device. I’m able to start VMs now without a problem.

Note: Cylance is only in monitoring mode, it shouldn’t have been blocking anything, but it still caused a problem with VirtualBox. Cylance is an incredibly crappy piece of software.

Thanks for your help, socratis.

by socratis » 10. Jan 2019, 20:28

by amp3rev0lt » 12. Feb 2019, 17:36

I do have the same issue as op, so I’ll add my case here.

I run Virtual Box 6.0.4 r128413, with the Host OS being Windows 10 Enteprise 1709.
Important to mention is that my Host System is a virtualized System on its own. (Vmware/ESX)
But as far as I know this should still work as long as I only host x32 Guest systems.

My guest System is a Debian x32. (GNS3 IOU VM)

If I try to start it, the same error as op stated occurs.

Attached you’ll find the log.

Thanks in advance!

by socratis » 13. Feb 2019, 20:01

That’s called nested virtualization. Not really supported unless we’re talking about VirtualBox running inside VirtualBox.

Please read really carefully the following FAQ: Diagnosing VirtualBox Hardening Issues for some generic guidelines/ideas. Remember, these are guidelines, not the exact solution, you have to use your judgement as to which program might be responsible.

I didn’t see anything obvious from your hardening log, so you may have to follow some other advice/action from the FAQ.

by amp3rev0lt » 14. Feb 2019, 08:51

Things I already tried:

Full Re-Install of VirtualBox (Setup Run as Administrator).
Disabled Antivirus
Starting the Guest VM in Headless Mode (Didn’t work either)
Removed all the Hyper-V Roles

by socratis » 14. Feb 2019, 09:33

Completely uninstall your antivirus.

And as I said, these are guidelines. Expand your horizons. For example there was a chronic problem with a Trusteer Rapport program that was used for safe banking. Any and every monitoring software, any and every system-wide software, is a suspect. Start uninstalling.

После переустановки anaconda я настроил новый проект Pycharm. Когда я отлаживаю один из моих скриптов Python, он получает эту ошибку:

Это происходит только тогда, когда я отлаживаю. Любой совет?

Для справки, это версии программного обеспечения, которые я сейчас использую:

Версия Python: 3.5
Версия Pycharm: 2017.3
Анаконда Навигатор версия: 1.8.7

4 ответа

Та же проблема, что и у тебя, Боб.

Вот мой обходной путь (не полное исправление, но он выполняет свою работу):

Например, переписать папку C: \ Miniconda3 \ Lib \ site-packages в C: \ Users \ YOUR_ACCOUNT \ venv \ Lib \ site-packages

После этого доступны оба режима запуска и отладки.

Надеюсь, это поможет!

В моем случае обновление пакета pyqt4 (предварительно скомпилированная версия) решило проблему.

Я получил ту же ошибку при запуске отладчика PyCharm с кодом, который включает в себя следующее:

Было бы хорошо, если бы выполнить тот же кусок кода через PyCharm в режиме без отладки (Run). Отключил приведенный выше код в режиме отладки, проблема решена.

Среда: PyCharm Community 2019.3, Anaconda 3, Python 3.7.3, pympler 0.7, Windows 10 Enterprise

Если это не работает, я методично обновляю все пакеты Python.

Process finished with exit code 1073741819 0xc0000005

Apparently, 0xC0000005 is the code for an access violation. Look at this guy’s question: http://tech.groups.yahoo.com/group/OpenCV/message/59196

Is there possibly a way to get around this? Recursion has never let me down before, and I found it extremely weird that it just all of a sudden did. Granted, I think 354 recursive calls is a tremendous amount, nonetheless, but I don’t understand how else to go about this problem.

I’d love to be able to get 50,000 recursion, but I come no where close, and I’m not even using objects. I don’t believe this is causing memory leaks, but I have no clue, I’ve never encountered something like this before.

Are you only allowed to have recursion so deep?

I’m not sure if that is your problem here or not, but yes you can only go so deep in recursion before your stack overflows.

When a function is called, stuff is put on the stack, and only unloaded when the function returns. With recursion a function keeps calling itself without returning, and things keep piling onto the stack.

The stack in action

Because parameters and local variables essentially belong to a function, we really only need to consider what happens on the stack when we call a function. Here is the sequence of steps that takes place when a function is called:

The address of the instruction beyond the function call is pushed onto the stack. This is how the CPU remembers where to go after the function returns.
Room is made on the stack for the function’s return type. This is just a placeholder for now.
The CPU jumps to the function’s code.
The current top of the stack is held in a special pointer called the stack frame. Everything added to the stack after this point is considered “local” to the function.
All function arguments are placed on the stack.
The instructions inside of the function begin executing.
Local variables are pushed onto the stack as they are defined.
When the function terminates, the following steps happen:

The function’s return value is copied into the placeholder that was put on the stack for this purpose.
Everything after the stack frame pointer is popped off. This destroys all local variables and arguments.
The return value is popped off the stack and is assigned as the value of the function. If the value of the function isn’t assigned to anything, no assignment takes place, and the value is lost.
The address of the next instruction to execute is popped off the stack, and the CPU resumes execution at that instruction.

PyCharm: Process finished with exit code 0

I am new to PyCharm and I have ‘Process finished with exit code 0’ instead of getting (683, 11) as a result (please see attachment), could you guys help me out please? Much appreciate it!

10 Answers 10

Trending sort

Trending sort is based off of the default sorting method — by highest score — but it boosts votes that have happened recently, helping to surface more up-to-date answers.

It falls back to sorting by highest score if no posts are trending.

Switch to Trending sort

That is good news! It means that there is no error with your code. You have run it right through and there is nothing wrong with it. Pycharm returns 0 when it has found no errors (plus any output you give it) and returns 1 as well as an error message when it encounters errors.

Editors and scripts do not behave like the interactive terminal, when you run a function it does not automatically show the the result. You need to actually tell it to do it yourself.

Im trying to learn to make geoprocessing tools.

Making a simple one to clip a raster but getting an error I cant decipher, from googling it looks like some kind of access violation.

I eventually want this to fire from a widget in a WAB app and return a zip file of multiple clipped images.

So I have made some progress, I realised I could export a modelbuilder version as a script and compare.

The problem was my extent I was passing in wasnt in correct format.

I now have the extent converted to a string and it runs, but it doesnt clip the right area

when I look at the generated script the values it passes in for the same polygon are :-

but the figures in my extent are :-

this looks like a lat/lng vs metres problem now but not sure, still after a bit of help.

I think whats happening is that when you are grabbing the information for the shapefile VIA

it is giving you the extent for the shapefile and not the polygon information. I could be wrong though.

Within the documentation for Clip_management, it says the rectangle can use a Envelope, Feature Class or Feature Layer. So lets try feeding in the clipping polygon information another way.

Change str(extent) to poly and see if it works. If it doesn’t work, import the shapefile into your BSelect.gdb as a featureclass and replace str(extent) with a variable for the path to the new featureclass.

I noticed you are using all of the optional parameters. Try replacing your Clip_management with this:

So, doing some things with Python while I had to use the debugger for process finished with exit code 0xc00000fd

When I clicked the debug button in PyCharm, this happened:

Strange, it’s the first time which happens. I run it again. Nothing to do, error still comes up.

Few seconds later I was already in searching for a solution. First one suggest that it’s a Windows problem (known and now fixed apparently), so you have to add…

To Environment variables in Run/Debug Configurations dialog add this pair:

=C: as NAME and c:\» as VALUE

Did this first operation. Nothing happened.

As long as many users had this problem while using Django (but not my case), another solution you can try is this one: from PyCharm menu, go to Run – Edit Configurations – Defaults and do the next:

This should fix the error if it appears while you was using Django.

And now, my case. I tried the first solution. I tried the second (even if I don’t use Django in the project).

Let’s see the third which worked for me.

A user on Stackoverflow suggested to uncheck PyQt compatible ckeckbox in PyCharm project Settings.

So, File – Settings – Build, Execution, Deployment – Python Debugger

Remember, Settings in File menu will apply this only for the current project. If you want to solve the issue globally, select also Default Settings.

Once applied, the debugger come back to life. This worked for me after I tried the previous suggestions.

Comments

abhinandansrivastava commented Jul 25, 2018

How to reproduce the behaviour

Your Environment

The text was updated successfully, but these errors were encountered:

no-response bot commented Sep 26, 2018

This issue has been automatically closed because there has been no response to a request for more information from the original author. With only the information that is currently in the issue, there’s not enough information to take action. If you’re the original author, feel free to reopen the issue if you have or find the answers needed to investigate further.

lock bot commented Oct 26, 2018

This thread has been automatically locked since there has not been any recent activity after it was closed. Please open a new issue for related bugs.

Footer

You can’t perform that action at this time.

You signed in with another tab or window. Reload to refresh your session. You signed out in another tab or window. Reload to refresh your session.

Источники:

Process finished with exit code 1073741819 0xc0000005

Comments

bglee85 commented Mar 19, 2019

ziruizhuang commented Mar 19, 2019

ziruizhuang commented Mar 19, 2019

jvishnuvardhan commented Mar 19, 2019

bglee85 commented Mar 20, 2019 •

4 Answers 4

Trending sort

PyPI wheels

third-party wheels

building from source dist

4 Answers 4

Trending sort

Comments

mansoorfayyaz commented Jun 15, 2017 •

tuxdna commented Jun 15, 2017 •

mansoorfayyaz commented Jun 16, 2017

tuxdna commented Jun 16, 2017

mansoorfayyaz commented Jun 16, 2017 •

tuxdna commented Jun 20, 2017

mansoorfayyaz commented Jun 20, 2017

4 Answers 4

Trending sort

2 Answers 2

Trending sort

4 Answers 4

Trending sort

4 Answers 4

Trending sort

PyPI wheels

third-party wheels

building from source dist

2 Answers 2

Trending sort

Process finished with exit code 1073741819 0xc0000005

2 Answers 2

Trending sort

2 Answers 2

Trending sort

2 Answers 2

Trending sort

4 Answers 4

Trending sort

1 Answer 1

Not the answer you’re looking for? Browse other questions tagged python opencv or ask your own question.

Related

Hot Network Questions

Subscribe to RSS

2 Answers 2

Trending sort

Comments

MENG2010 commented Oct 17, 2020

MENG2010 commented Oct 17, 2020

MENG2010 commented Oct 17, 2020 •

Root cause 1. PyQt compatible feature.

Solution: disable this feature:

Solution 1. Re-install Keras, then update h5py.

Solution 2. Install/Update h5py via Anaconda navigator.

Root cause 3. PyCharm Issue.

Solution: reinstall PyCharm.

Root cause 4. Not sure.

Solution. reinstall the conda environment and pycharm.

MENG2010 commented Oct 19, 2020

mleonardalbert commented Oct 20, 2020

MENG2010 commented Oct 21, 2020

mleonardalbert commented Oct 21, 2020

11 Answers 11

Trending sort

Comments

maxmurph commented Jan 27, 2020

stuartarchibald commented Jan 27, 2020

maxmurph commented Jan 27, 2020

stuartarchibald commented Jan 28, 2020

question

1 Answer

question details

3 Answers 3

Trending sort

1 Answer 1