Process finished with exit code 1073740791 0xc0000409

03.09.202203.09.2022 admin 0 Comments

Process finished with exit code 1073740791 0xc0000409

-1073740791 (0xC0000409) Error when setting Pixmap on QLabel

As sadly as Python/PyQt does not give give specific error messages about things like these, I am only getting this error code when running my code.

I am using PyQt and OpenCV to build an app that displays a webcam feed.

I’ve tried using a different approach to this, and I’ve done my research but I really don’t understand what I’m doing wrong. 🙁

I am studying this code from:

OpenCV Python GUI Development Tutorial 10: Display WebCam Video Feed on QLabel

Any help would be much appreciated. Thank you!

1 Answer 1

Your code has several errors:

Assuming that the above is corrected you will have another problem, each time you press btnPlay you are calling start_webcam, and in that method you are creating a new QTimer so if you press n times you could not stop it by pressing btnStop since the reference to the Previous timers have been lost.

The creation of the QTimer must be at the beginning, and only connect the clicked signals of the buttons to the start and stop method of the QTimer

On the other hand depending on the hardware the reading every 5ms does not necessarily generate an image, opencv to indicate that the reading has been correct return ret, if it is true the reading has been a success and you can just process it.

image is not necessary to attribute the class since you only use it in a function.

As sadly as Python/PyQt does not give give specific error messages about things like these, I am only getting this error code when running my code.

That problem is not Python or PyQt, the problem is your IDE, many IDEs do not have the ability to show all the errors so I recommend you run it from the CMD or terminal and there you will find the complete error message.

When I call the model.fit(arr_train,arr_test) I get the following message:

How can I resolve this?

2 Answers 2

Trending sort

Trending sort is based off of the default sorting method — by highest score — but it boosts votes that have happened recently, helping to surface more up-to-date answers.

It falls back to sorting by highest score if no posts are trending.

Switch to Trending sort

I resolved this by uninstalling xgboost 0.90 (via the terminal) and then installing xgboost 0.80 instead

Are you on a Windows system? If so 0xC0000409 refers to a stack buffer overflow. As you can see from here

Quoting from the website:

The error code STATUS_STACK_BUFFER_OVERRUN (0xc0000409) refers to a stack buffer overflow while the error code STATUS_STACK_OVERFLOW (0xc00000fd) refers to stack exhaustion.

Maybe your dataset is too large to fit in memory. Try to reduce the size of your training set before doing the fit.

Comments

vybhav72954 commented Feb 7, 2021

System information

The main reason is cuda version information is not stored in cudnn.h anymore in CUDA 11.X. In CUDA 11.X, the version information seems to stored in new cudnn_version.h file. So many build tools such as cmake depends on cudnn.h for CUDA version information cannot guess CUDA version anymore.

Am sure its cudnn 11.2 (The name of zip file)

Describe the problem

So I have been trying to accelerate my Deep Learning program using GPU since ages, for the first time I was able to find my GPU and after going through the whole process, I ran

It found my GPU

I then went on to train my CNN model, and it gave me traceback:

The whole error:

Problem 2 Can someone please help me with this error.

Provide the exact sequence of commands / steps that you executed before running into the problem
Summed up above

Any other info / logs
Pip Freeze

The text was updated successfully, but these errors were encountered:

The following code:

Question: What can I do against it?

2 Answers 2

Trending sort

Trending sort is based off of the default sorting method — by highest score — but it boosts votes that have happened recently, helping to surface more up-to-date answers.

It falls back to sorting by highest score if no posts are trending.

Switch to Trending sort

I have recreated what you want with the code you gave and got this to work

I have tried it with a simple txt file and it worked without errors. Could you test it with your file?

I also find that you forgot to pass self as a parameter into menuoffnen, or is it again a problem in the post?

Yes you can put all of this in an try except block you should do that any way when a user can input things. Have you tried to use a different text file? And sometimes with decode errors it helps to leave out the encoding parameter completly.

Here is something about detecting the encoding of a file. It may be usefull if you want to support multiple encodings in the future.

Training Script failed with no Error Stack «exit code 1073740791 0xc0000409» #13679

Comments

OisinWatkins commented Jan 9, 2020 •

-Keras Version: 2.3.1
-Tensorflow Version: 2.0
-OS: Windows 10
-Running on: CPU Processor Intel(R) Core(TM) i7-8850H
-Developed in: PyCharm

I’m attempting to build a novel model using an implementation of a highway layer (implementation found at: https://gist.github.com/iskandr/a874e4cf358697037d14a17020304535). There was a typo listed on this page which is corrected in my copy of the code.

I have a simplified version of the code I’m using below:

The resulting network has around 2.5 million parameters, which despite the warnings my machine prints it can handle no problem. Once training begins I get a warning about the amount of memory I’m using, which I expect, and then the script simply stops running. The only stack trace I get is: «exit code 1073740791 0xc0000409»

I have seen this is one other issue that was raised in this git, however it has been tagged as «stale» with no answer posted, so I thought I’d ask again.

Thanks in advance for your time!
All the best,
Oisín.

The text was updated successfully, but these errors were encountered:

Hi stackoverflow community,

I just started learning how to implement a gui in Java and run into an extremly weird problem on my Windows 10 Desktop. When I tried running my code, it compilied without errors, did nothing for about 5 seconds and then returned the following message:

At first I thougt there is a problem with my code, but I couldn’t find out what. While trying to find the error, I noticed that not even something as simple as

works anymore, although it worked just fine recently. Normal console output works fine, too, as older projects proved, it will just exit as soon as any kind of gui appears. I tried running the same code on my linux based laptop and it runs without a problem.

I decided to check the java tools, like java configurator and java info, but they don’t start at all. The cursor changed into the loading symbol for 2 seconds, then nothing. Java mission control starts, but crashes as soon as I try to open a JMX console.

I deleted and reinstalled Java JDK and JRE (9.0.4) several times, tried using a different version, reinstalled IntelliJ, even reset Windows to an earlier system image, nothing changed.

The only real answers 3 hours of google searches yielded were something about a broken NVidia Driver (I use AMD, but still upgraded the driver, didn’t help) and that this error code is a Windows error code for stack overflow. I tried increasing the memory heap and controlled memory usage by enabling the info bar, but that didn’t help either.

After hours of trying to solve this problem, I would be really thankful for any help.

Edit: Per demand, an example (my original code):

The following code:

Question: What can I do against it?

2 Answers 2

Trending sort

Trending sort is based off of the default sorting method — by highest score — but it boosts votes that have happened recently, helping to surface more up-to-date answers.

It falls back to sorting by highest score if no posts are trending.

Switch to Trending sort

I have recreated what you want with the code you gave and got this to work

I have tried it with a simple txt file and it worked without errors. Could you test it with your file?

I also find that you forgot to pass self as a parameter into menuoffnen, or is it again a problem in the post?

Here is something about detecting the encoding of a file. It may be usefull if you want to support multiple encodings in the future.

2 Answers 2

Trending sort

Trending sort is based off of the default sorting method — by highest score — but it boosts votes that have happened recently, helping to surface more up-to-date answers.

It falls back to sorting by highest score if no posts are trending.

Switch to Trending sort

So the problem is the self in two instances, first as an argument in def accepted and secondly the self.accepted when I call it.

You don’t use ‘self’ in the method, so it could be turned into a static method:

Not the answer you’re looking for? Browse other questions tagged python-3.x pycharm or ask your own question.

Hot Network Questions

Subscribe to RSS

To subscribe to this RSS feed, copy and paste this URL into your RSS reader.

By clicking “Accept all cookies”, you agree Stack Exchange can store cookies on your device and disclose information in accordance with our Cookie Policy.

Основной файл myproject.py

Файл table.py, созданный с помощью Designer. Основное окно

Файл info.py, созданный с помощью Designer. Дополнительное окно для функции

Ошибка при запуске функции CreateProcess()
Доброго времени суток! Делаю лабу по Операционным системам и столкнулась с проблемой. Вот задание.

Ошибка установки Creators Update 0xc0000409
Установка доходит до 87% и далее ошибка 0xc0000409 Точно не знаю откуда доставать логи по.

Писк из ПК при запуске определённой игры
Возникает писк при запуске определённой игры, запуск другой игры, более требовательной к железу, не.

Открытие браузера на определённой странице при запуске заданного приложения
Здравствуйте, я задался такой идеей, чтоб при запуске какого либо приложения (к примеру игры) с ним.

Решение

KaffLime, не читабельно, ты используешь QtDesigner, вот главная ошибка.

При работе с таблицами, и если ты используешь ее не только для отображения данных, то нужно использовать QTableView + QAbstractTableModel, иначе вся программа будет большим костылем, тогда функции сортировки, выделения будут описаны в пару строк кода. Так же будет понятно, где, что и как работает и таких ошибок возникать не будет.

Добавлено через 5 минут
Так себе пример конечно, но хотя бы:

Осуществить запуск одной из программ, определенной при запуске командного файла
Доброго времени суток! Прошу помочь с написанием батничка, т.к. крайне нуждаюсь в нём, а попытки.

При каждом запуске программы рисовать графики в определенной последовательности цветов
Люди добрые, помогите, пожалуйста, нужно реализовать алгоритм, при котором графики при каждом.

Выбор функции при нажатии определённой клавиши
Итак, хочу написать код, который бы находил производную функции. Нужно только лишь для 4 функций.

Выполнение функции при переходе с определённой формы
Есть файл login.php (приведён ниже) и processing.php. В файле processing.php описаны все функции.

Нажатие определенной клавиши на клавиатуре = Запуск определенной функции
Здравствуйте. У меня такой вопрос: как при нажатии, к примеру, клавиши «1» на клавиатуре запустить.

При запуске Касперского Ошибка: avp.exe ошибка приложения
Добрый день. Сегодня при запуске Касперского 2012 Ошибка: avp.exe ошибка приложения(Если.

Here is the logged error:

4 Answers 4

Trending sort

Trending sort is based off of the default sorting method — by highest score — but it boosts votes that have happened recently, helping to surface more up-to-date answers.

It falls back to sorting by highest score if no posts are trending.

Switch to Trending sort

This was solved by installing pyqt. I installed pyqt with the command (from conda-forge)

In my case it was obsolete pyqt library. This following worked for me.

The problem does not come from PyCharm, if you use any other IDEs, the result would be the same. In fact, they all use a package called pydev to debug. Your best bet would be to create a brand new Python environment (PyCharm has a function for this) and gradually install packages.

The code variation v2 is working while v1 throws the same error mentioned by the OP.

Why does PyQt crashes without information? (exit code 0xC0000409)

I’m trying to develop a software with PyQt, but I often get stuck on software crashes without debug information (only the exit code 0xC0000409). I’m using QThread, and I wrote a system like this:

Can you see the mistake I made? Is there a way to debug the code if there is a crash without other infos? (I use PyCharm 2017.1.3).

2 Answers 2

Trending sort

Trending sort is based off of the default sorting method — by highest score — but it boosts votes that have happened recently, helping to surface more up-to-date answers.

It falls back to sorting by highest score if no posts are trending.

Switch to Trending sort

PyQt is thread-safe to the same extent that Qt is thread-safe. The Qt docs will tell you which parts of their API are guaranteed to be so, and under what circumstances.

(NB: if you’re using any kind of IDE or debugger, and you are getting unexpected errors or crashes, your first step in diagnosing the problem should always be to test the code in a standard console. Quite often, the IDE or debugger itself can be the cause of the problem, or may mask error messages comming either from Python or from underlying libraries, such as Qt).

The following code:

Question: What can I do against it?

2 Answers 2

Trending sort

Trending sort is based off of the default sorting method — by highest score — but it boosts votes that have happened recently, helping to surface more up-to-date answers.

It falls back to sorting by highest score if no posts are trending.

Switch to Trending sort

I have recreated what you want with the code you gave and got this to work

I have tried it with a simple txt file and it worked without errors. Could you test it with your file?

I also find that you forgot to pass self as a parameter into menuoffnen, or is it again a problem in the post?

Here is something about detecting the encoding of a file. It may be usefull if you want to support multiple encodings in the future.

Process finished with exit code 1073740791 0xc0000409

This forum has migrated to Microsoft Q&A. Visit Microsoft Q&A to post new questions.

Asked by:

Question

I have created a C# application, having 3 projects:

Here, I have a simple class in C++ project which I am exporting and calling a very simple method of this class from CLI project.

The code builds fine, but once I try to run it, it exits with the following output messages:

It works fine if I am creating a class object in the heap. The error is coming if I create static object instance.

Как настроить PyCharm что бы программа при выполнении не вылетала?

Код специально с ошибкой ICPCONAdres3 не сущетсвует.

В IDE PyCharm программа при выполнении просто закрывается с не информативной ошибкой:

Как сделать чтобы если при выполнении метода вылетала ошибка то выводился Алерт?
В метод подается число 10, находит в базе, затем возвращает значения и выводит true. Подается число.

Как сделать чтобы программа не вылетала при вводе не числа?
Помогите пожалуйста, я начинающий программист и мне нужно сделать так чтобы при вводе в строку.

как как сделать, чтобы при двойном нажатии кнопки(+,-,/,* и т.д) программа не вылетала?
вопрос о калькуляторе как сделать чтобы при двойном нажатии кнопки(+,-,/,* и т.д) программа не.

Узнать, что программа вылетала с необработанным исключением
Как это сделать? Она все еще висит в процессах, и простым их мониторнгом не отделаться

-1073740791 (0xC0000409) Error when setting Pixmap on QLabel

As sadly as Python/PyQt does not give give specific error messages about things like these, I am only getting this error code when running my code.

I am using PyQt and OpenCV to build an app that displays a webcam feed.

I’ve tried using a different approach to this, and I’ve done my research but I really don’t understand what I’m doing wrong. 🙁

I am studying this code from:

OpenCV Python GUI Development Tutorial 10: Display WebCam Video Feed on QLabel

Any help would be much appreciated. Thank you!

1 Answer 1

Your code has several errors:

The creation of the QTimer must be at the beginning, and only connect the clicked signals of the buttons to the start and stop method of the QTimer

image is not necessary to attribute the class since you only use it in a function.

As sadly as Python/PyQt does not give give specific error messages about things like these, I am only getting this error code when running my code.

-1073740791 (0xC0000409) Ошибка при установке Pixmap на QLabel

Как ни печально, поскольку Python / PyQt не выдает конкретных сообщений об ошибках о таких вещах, я получаю этот код ошибки только при запуске своего кода.

Я использую PyQt и OpenCV для создания приложения, которое отображает канал веб-камеры.

Я пробовал использовать другой подход к этому, и я провел свое исследование, но я действительно не понимаю, что я делаю не так. 🙁

Я изучаю этот код из:

OpenCV Python GUI Development Tutorial 10: Display WebCam Video Feed on QLabel

Любая помощь приветствуется. Спасибо!

@ellyanesc Я не уверен, как воспроизвести эту ошибку, но она возникает только в строке qpixmap

если вы не предоставите минимальный воспроизводимый пример, у вас меньше шансов получить помощь, пока

В вашем коде есть несколько ошибок:

Предполагая, что приведенное выше исправлено, у вас будет другая проблема, каждый раз, когда вы нажимаете btnPlay, вы вызываете start_webcam, и в этом методе вы создаете новый QTimer, поэтому, если вы нажмете n раз, вы не сможете остановить его, нажав btnStop, так как ссылка на Предыдущие таймеры были утеряны.

Создание QTimer должно быть в самом начале и подключать только сигналы нажатия кнопок к методу запуска и остановки QTimer

С другой стороны, в зависимости от оборудования, чтение каждые 5 мс не обязательно генерирует изображение, opencv указывает, что чтение было правильным, return ret, если это правда, чтение было успешным, и вы можете просто обработать его.

image не является обязательным атрибутом класса, поскольку вы используете его только в функции.

As sadly as Python/PyQt does not give give specific error messages about things like these, I am only getting this error code when running my code.

Эта проблема не в Python или PyQt, проблема в вашей IDE, многие IDE не могут отображать все ошибки, поэтому я рекомендую вам запустить ее из CMD или терминала, и там вы найдете полное сообщение об ошибке.

Я сделаю все возможное, чтобы исправить это, я очень ценю вашу помощь. Спасибо. : D

I tried to design a very basic GUI app that shows the entered height on a dialog, but after I press the ‘OK’ button on the main window, the whole program crashes and the process finishes with this exit code:

Here’s the full code for the app, the UI files are below:

The main window’s UI:

I would appreciate some help on fixing this error, and on why it occured.

1 Answer 1

You are trying to access an attribute that does not exist:

My_Window is a class, while mid_label_nexttext was assigned to the instance of that class ( self is always the reference to the current instance).

If you want to set the text for that label from a «parent» window, you either add an extra argument to the __init__ that allows to get the text, or you set it from the main window.

Use the text as init argument

Set the text from the parent

Note that the first method is usually better, mostly for modularity reasons: let’s say that you create that dialog from different classes in different situations, whenever you need to change the object name of the label (or the whole interface structure) you can easily change its reference in the dialog subclass, otherwise you’ll need to change every reference in your code.

The following code:

Question: What can I do against it?

2 Answers 2

Trending sort

Trending sort is based off of the default sorting method — by highest score — but it boosts votes that have happened recently, helping to surface more up-to-date answers.

It falls back to sorting by highest score if no posts are trending.

Switch to Trending sort

I have recreated what you want with the code you gave and got this to work

I have tried it with a simple txt file and it worked without errors. Could you test it with your file?

I also find that you forgot to pass self as a parameter into menuoffnen, or is it again a problem in the post?

Here is something about detecting the encoding of a file. It may be usefull if you want to support multiple encodings in the future.

Русские Блоги

Он неожиданно сообщил об ошибке при написании домашнего задания на Python (думаю, я был прав, идея не проблема.

Интерфейс тоже может вылезти (это то, что я себе представлял

Но я не могу взаимодействовать (так что подозреваю, что это проблема окружающей среды или что-то еще, в любом случае это не моя собственная причина, я уверен

Затем я попробовал пример, приведенный учителем в классе, и обнаружил, что он может работать (я знаю, что ошибаюсь, и я не понимаю конкретную ошибку ==

Мой интерфейс можно только просматривать, щелкать по нему нельзя, и он зависает при нажатии (программа автоматически закрывается, см. Следующий рисунок:

(Я нашел лучший адрес блога: отправьте его в дружбу
a.https://www.cnblogs.com/yh-blog/p/10547826.html
b.https://blog.csdn.net/lzbmc/article/details/88196667

2. Это связано со мной, что программа PyQt5 сообщает об ошибке (но не может решить мою проблему.
обычно означает, что self должен иметь атрибуты, в противном случае lineEdit1.setText (параметр) в функции aaa и (параметр) в приведенном выше initUI (объект, который необходимо изменить) не предназначены для Тот же объект, после (вызывая) операцию, нажмите кнопку, символы в текстовом поле не могут быть изменены, и после замораживания сообщается об ошибке, и достаточно изменить ее, чтобы она была согласованной.
(то же, что и выше передача дружбы:
a.https://blog.csdn.net/qq_26761495/article/details/80552411

Потом сам добавляю атрибуты в команду, чтобы не было такой проблемы

Наконец, позже я увидел еще одну деталь: см. Страницу ниже (моя жена спасибо,

Я еще раз просмотрел свою программу, и она была хороша (оказалось, что currentText () написана как setCurrentIndex () 555, и я ушел со слезами на глазах.

После смены проблем нет ==

При небольшом дрожании руки появятся ошибки

The following code:

Question: What can I do against it?

2 Answers 2

Trending sort

Trending sort is based off of the default sorting method — by highest score — but it boosts votes that have happened recently, helping to surface more up-to-date answers.

It falls back to sorting by highest score if no posts are trending.

Switch to Trending sort

I have recreated what you want with the code you gave and got this to work

I have tried it with a simple txt file and it worked without errors. Could you test it with your file?

I also find that you forgot to pass self as a parameter into menuoffnen, or is it again a problem in the post?

Here is something about detecting the encoding of a file. It may be usefull if you want to support multiple encodings in the future.

Process finished with exit code 1073740791 0xc0000409

I’ve this function that read a text file and input the content in a QTextEdit (it works on thread mode). The problem is that if I call much times this function the IDLE return this exit code:

This exite code only happens when I try to input the text in the QTextEdit, I’m 100% about this. There is a way to fix it?

OS: Windows 10 Home 10.0.19042 Build 19042
RAM: 8 GB
Python: 3.8
IDE: PyCharm

Do you mean it happens in this line? Did you use debugger to check where exactly it happens? How does get_the_stdout look like if you print it to stdout?

Do you mean it happens in this line? Did you use debugger to check where exactly it happens? How does get_the_stdout look like if you print it to stdout?

I’m using debugger exactly now, but I not experiment with the PyCharm debugger.

This is the exacly value of the variable get_the_stdout:

For the people with same problem try to replace the QTextEdit for a label + scroll area, it worked for me (Y)

Comments

TomerEphraim commented Jan 5, 2021 •

I’m trying to train a detection model on some 512×384 color images, using a pretrained yolov3 model.
This is the code I run:

The train and validation subfolders inside images_folder contain about 5 images each.
When I run the code on pycharm, several seconds after the usual tensorflow outputs, I get this message:

I thinks it has something to do with the gpu memory running out of space.
I checked the system monitor and the gpu memory is indeed full.

If I disable the GPU then it works just fine.
Any idea how can run this on the GPU without getting this error?

I am using the latest imageai version (2.16) with all the required modules installed (Including all the CUDA related stuff):
Python 3.7
tensorflow 2.4.0
Keras 2.3.0
numpy 1.19.3
keras-resnet 0.2.0
scipy 1.4.1
h5py 2.10.0
matplotlib 3.3.2
opencv-python

Additional Details:
IDE: Pycharm
OS: Windows 10 Pro
GPU: Nvidia GTX 1080 ti
CPU: Intel Core-i7 8th gen

The text was updated successfully, but these errors were encountered:

Process finished with exit code 1073740791 0xc0000409

Code for running machine learning ensemble learning in python3.5 environment

The data set is the Australia credit dataset of UCI website, with 690 samples and 15 features

When calling the XGBoost model in sklearn, there is no error warning, but the final output is wrong, and the accuracy rate cannot be output normally.

Output result (normal output of other models):

Solution (refer to online tutorial):

Guess it may also be a memory problem. To isolate the GPU, add the following code:

Finally it can output normally

Intelligent Recommendation

I have a wrong jump out an error as follows: Isolated is the problem of lack of graphics card, and solve the following: That is, the GPU run program is not applicable to the CPU. forward from.

Search D: \ Anaconda3 \ PKGS \ CUDNN-8.1.0.77-H3E0F4F4_0 \ library \ bin 6 dynamic libraries (or search «CUDNN_OPS_INFER64_8.DLL in an Anaconda directory): copy to C:\Program Files\NVIDIA GPU Com.

This is the error code of pyCharm But many people don’t pay attention to the red letters on it The real error message is in the red letter (many people on the network say it is a memory error, w.

More Recommendation

When a column has a value, fill in the value without reporting an error, delete this column and fill in the value again to report an error. PyQt5 interface. The error is Process finished with exit cod.

This method can also be used when you only want to use the CPU to process the model.

Problem occurs As shown: (https://img-bbs.csdn.net/upload/202004/08/1586358766_933882.png) Update listWidget according to combobox value After selecting a value, it will freeze and then flash back. pr.

Я пытаюсь создать приложение React Native на эмуляторе Android.

Однако при попытке запустить эмулятор я продолжаю получать сообщение об ошибке ниже. Он вылетает со следующим:

Есть ли способ решить эту проблему? Извините, я новичок в студии Android

Попробуй перезапустить adb server. Перейдите в C / users / (имя пользователя) / AppData / Local / Android / Sdk / platform-tools В командной строке, выполнив

а затем запустить

Обратите внимание, что указанная выше команда может измениться в зависимости от места установки вашего SDK в системе.

Другие вопросы по теме

Comments

dht5432 commented Dec 3, 2019

C:/Users/j/Desktop/BeautyCamera-master/main.py:147: MatplotlibDeprecationWarning: Adding an axes using the same arguments as a previous axes currently reuses the earlier instance. In a future version, a new instance will always be created and returned. Meanwhile, this warning can be suppressed, and the future behavior ensured, by passing a unique label to each axes instance.
plt.axes().get_yaxis().set_visible(False)
C:/Users/j/Desktop/BeautyCamera-master/main.py:149: MatplotlibDeprecationWarning: Adding an axes using the same arguments as a previous axes currently reuses the earlier instance. In a future version, a new instance will always be created and returned. Meanwhile, this warning can be suppressed, and the future behavior ensured, by passing a unique label to each axes instance.
ax = plt.axes()

The text was updated successfully, but these errors were encountered:

howardgriffin commented Mar 27, 2020

Footer

You can’t perform that action at this time.

You signed in with another tab or window. Reload to refresh your session. You signed out in another tab or window. Reload to refresh your session.

Я пытаюсь использовать fastText с пичармом. Всякий раз, когда я запускаю код ниже:

процесс завершен с ошибкой:

Как я могу исправить?

1 ответ

Вы используете систему Windows? 0xC0000409 означает переполнение буфера стека, как показано в этой ссылке справки Windows.

Ниже приводится несколько советов, которые взяты из этой ссылки для решения подобных проблем.

STATUS_STACK_BUFFER_OVERRUN является исключением /GS. Они выбрасываются, когда Windows обнаруживает «подделку» cookie-файла безопасности, защищающего обратный адрес. Вполне вероятно, что вы пишете что-то за концом буфера или записываете что-то в указатель, указывающий на неправильное место. Однако также возможно, что у вас есть какая-то хитрая память или иное неисправное оборудование, которое отключает код проверки.

Еще одна вещь, которую вы можете сделать, это запустить код как есть на другом ПК и посмотреть, не сработает ли это, это может указывать на аппаратную проблему, если это не так.

Другие стратегии заключаются в уменьшении размера обучающего файла путем удаления некоторого текста и уменьшения размера словарного запаса путем выполнения некоторой нормализации текста. Надеюсь, это поможет.

How to fix ‘RuntimeError: input(): lost sys.stdin’ error in python 3.7

I am practicing some codes and seemingly out of nowhere i have got this error when I ran a very usual piece of code. The problem i am solving takes input, calculates something and gives an output.

I was running it on an online IDE (some coding contest site) and since it wasn’t very good(no surprises there!) i decided to run it on the Pycharm Community Edition and then copy paste it over there. Instead of giving me an output, it showed this,

the code i tried to run was this,

this may or may not be helpful, but i don’t know what’s wrong.

7 Answers 7

Trending sort

Trending sort is based off of the default sorting method — by highest score — but it boosts votes that have happened recently, helping to surface more up-to-date answers.

It falls back to sorting by highest score if no posts are trending.

Switch to Trending sort

The problem could relate to your code editor / Python window. The QGIS Python console, for example, doesn’t have stdin or stdout, so you would get the ‘RuntimeError: input(): lost sys.stdin’ error if running your code there.

I moved it to another folder and it is working fine. Other files in the old folder used to work fine, now they don’t. Is this an error relating to OS?

I ran into this problem randomly from inside a cygwin window for the ‘twine’ package. Restarting cygwin and doing exactly the same thing again fixed the problem. No idea what the underlying issue is, and ‘turn it off and on again’ seems like prosaic advice but. try turning it off and on again.

this might sound stupid but try closing your idle not directly from exit button but, like if you using windows close it from task manager and liekwise in other os. and try reopening it, even if it didn’t worked, try restarting your pc, this really sounds basic and stupid but it really works(at least it worked for me, and also worked for a friend to whom i advised this)

I fixed the same error in Visual Studio «Python» by Project > Properties then unclicking the «Windows Application» checkbox

I was having the same problem but it solved it when I changed the encoding to UTF-8.

What does «Process finished with exit code 1» mean?

I am beginner in Python. I tried to develop a simple currency program but I have a problem. The program should calculate money when the calculate button is clicked(like an exchange). But I can’t do it. PyCharm writes «Process finished with exit code 1»

2 Answers 2

Trending sort

Trending sort is based off of the default sorting method — by highest score — but it boosts votes that have happened recently, helping to surface more up-to-date answers.

It falls back to sorting by highest score if no posts are trending.

Switch to Trending sort

0 and 1 are exit codes, and they are not necessarily python specific, in fact they are very common.

exit code (0) means an exit without errors or issues.

exit code (1) means there was some issue / problem which caused the program to exit.

The effect of each of these codes can vary between operating systems, but with Python should be fairly consistent.

0 and 1 are exit codes.

exit code (0) means an exit without an errors or any issues, can be a compile time error or any dependency issue.

exit code (1) means there was some issue which caused the program to exit. For example if your program is running on port :8080 and that port is currently in used or not closed, then you code ends up with exit code 1

Я пытаюсь использовать fastText с PyCharm. Всякий раз, когда я запускаю код ниже:

Процесс завершается с этой ошибкой:

Что вызывает эту ошибку и что можно сделать, чтобы ее избежать?

Вы используете систему Windows? 0xC0000409 означает переполнение буфера стека, как показано в эта ссылка справки Windows.

Ниже приведены некоторые советы, взятые из эта ссылка для решения проблем аналогичного типа.

STATUS_STACK_BUFFER_OVERRUN is a /GS exception. They are thrown when Windows detects ‘tampering’ of a security cookie protecting a return address. It is probable that you are writing something past the end of a buffer, or writing something to a pointer that is pointing to the wrong place. However it is also possible that you have some dodgy memory or otherwise faulty hardware that is tripping validation code.

Another thing you could do is run the code as is on a different PC and see if that fails, this may point to a hardware problem if it doesn’t.

Другие стратегии заключаются в уменьшении размера обучающего файла путем удаления некоторого текста и уменьшения размера словаря путем выполнения некоторой нормализации текста. Надеюсь, это поможет.

Process finished with exit code 1073740791 0xc0000409

Linking is a C++ solution, you can modify the stack memory allocation, you can also modify the code: change the excessively large variables into global variables~~, So that it is not stored in the stack area~~。

Use global declarations for variables in python code:

After changing the code, the same error was reported, and then the stack memory was modified in pycharm to repair:

Help->Find Action->Search VM->

It crashes as soon as nnd changes the code. It uses a brand new method to create a new thread to set the stack space:

launch() is the name of the method to be launched, hope this is the last update.

PyQt5 fails with cryptic message

How to get call stack from PyQt5? How to get more verbose crash messages?

Python 3.6.1 PyQt5 5.8.1 PyCharm

1 Answer 1

Managed to fix it by rolling back your NVIDIA Driver to the previous version. I was on version 378.49 and switched back to 376.33 and now everything works fine. You can give that a try regardless of your graphics card.

Example with GTX 965M:

I have tested this version on my laptop (with GeForce GTX 960M).

It starts, works and finishes with exit code 0 on the environment console. It seems to be ok now.

Here is what Nvidia changed since the buggy (378.49) version of their driver:

Updated:

I have dealt with the same problem, and the answer is twofold:

To catch the exceptions, you need to overwrite the sys exception handler:

Then in your execution code, wrap it in a try/catch.

Пытаюсь использовать fastText с PyCharm. Всякий раз, когда я запускаю ниже приведенный код:

Процесс выходит с данной ошибкой:

Что вызывает данную ошибку и что можно сделать, чтобы её избежать?

1 ответ

Когда я останавливаю скрипт вручную в PyCharm, process finished с exit code 137. Но скрипт у меня не останавливался. Все равно получался exit code 137. В чем проблема? Версия Python стоит 3.6, process finished при запуске xgboost.train() метода.

Вы используете windows-систему? 0xC0000409 означает переполнение буфера стека как видно в этой ссылке справки по windows.

Ниже приведен некоторый совет, который взят из этой ссылки для решения подобного типа вопросов.

STATUS_STACK_BUFFER_OVERRUN является исключением типа /GS. Они выбрасываются, когда Windows обнаруживает ‘tampering’ из security cookie, защищающий адрес возврата. Вероятно, что вы что-то пишете мимо конца буфера, или записываете что-то в указатель, который указывает в неправильное место. Однако также возможно, что у вас есть какая-то догдячая память или иное неисправное аппаратное обеспечение, которым является спотыкающийся код валидации.

Еще одна вещь, которую вы могли бы сделать, это запустить код как есть на другом ПК и посмотреть, если это не удастся, это может указывать на аппаратную проблему, если это не так.

PyQt5 fails with cryptic message

How to get call stack from PyQt5? How to get more verbose crash messages?

Python 3.6.1 PyQt5 5.8.1 PyCharm

1 Answer 1

Example with GTX 965M:

I have tested this version on my laptop (with GeForce GTX 960M).

It starts, works and finishes with exit code 0 on the environment console. It seems to be ok now.

Here is what Nvidia changed since the buggy (378.49) version of their driver:

Updated:

I have dealt with the same problem, and the answer is twofold:

To catch the exceptions, you need to overwrite the sys exception handler:

Then in your execution code, wrap it in a try/catch.

Странный exit code

Process finished with exit code 245[
Python 3.7.3 Программа постоянно некорректно завершает работу. А именно примерно вот такие.

Решение

P.S. Что интересно, у всех яндекс-типа-лицееистов одна и та же ошибка с этим калькулятором. Видимо, потому что код просто воруете друг у друга.

Наглая ложь. Яндекс-лицей самый провальный образовательный проект. Никто из вас даже близко программировать не научится.

Exit code 1
Имеется программка с меню и графикой. Компилируется нормально, но при запуске выдает exit code 1.

Java exit code 13
Здравствуйте, уважаемые программисты, не могли бы вы мне помочь? Мне не удаётся устновить eclipse.

exit code 201
помогите с программой, дается: количество хим. элементов, двумерный массив как они друг с другом.

Exited with exit code = 201
Вот, собственно, код:uses CRT; const MAX_UP=10; MAX_RIGHT=20; var a:array of byte;.

Программа выдает ошибку: exit code 2
Дошел до этого момента, решил попробовать, как идет программа, а она выдает ошибку exit code 2.

Comments

jmickela commented Aug 11, 2016

I’ve been trying in vain to use scss installed in Linux to process my scss files after changes in PHPStorm, First, PHPStorm can’t see the bash.exe file in System32, so I copied it to the root of the C:\ drive.

The text was updated successfully, but these errors were encountered:

ArtemGr commented Aug 12, 2016 •

I have a similar problem in Rust.
(Windows 10.0.14393).

Here’s some Rust code that’s trying to run the bash:

And here’s what it prints:

sundhaug92 commented Aug 12, 2016

Strange. Are you using a 64-bit Rust and PHPStorm?

ArtemGr commented Aug 12, 2016

Yes, Rust is 64-bit, with the GNU toolchain (rust-nightly-x86_64-pc-windows-gnu).

ArtemGr commented Aug 12, 2016

This also happens when there is a batch file between the test executable and the bash.

ArtemGr commented Aug 12, 2016

ArtemGr commented Aug 12, 2016 •

Ouch. Experimenting some more I figured that direct kernel32::CreateProcessA approach doesn’t work either!

jmickela commented Aug 12, 2016 •

I can confirm that the posted workaround works in PHPStorm. It’s not ideal as it makes the output of the command unavailable and returns no error code, even if there is one, but it does successfully run the command. I still have to use the copied bash.exe though, the one in System32 still can’t be run from inside PHPStorm.

stevenengler commented Aug 17, 2016 •

It looks like there are two problems here. The first seems to be that you’re trying to run bash from a 32 bit version of PHPStorm. This issue may help: #870

The next is that stdout can only be sent to a console. You have a different error message, but it’s likely related to: #2

ArtemGr commented Aug 17, 2016

@stevenengler
Wouldn’t the #2 prevent using bash from the PHPStorm, regardless of whether the PHPStorm runs under the 32 or 64-bit JVM?

Anyway, it looks like #861 is a duplicate. Thanks for the triage!

stevenengler commented Aug 17, 2016

@ArtemGr I think that’s correct, afaik #2 prevents you from receiving the stdout in a non-console application regardless of whether it’s a 32- or 64-bit application.

Sebazzz commented Feb 25, 2017

This also happens when run from MSBuild. Repro file:

Save and execute:

With bash copied in SysWow64. Of course, execution from Windows cmd or x86 powershell works fine.

I have a recursion function which is finding Eulerian Path. I do not think that the definition of the function is relevant (but if someone thinks so, I will paste it as well).

The problem is that when I am running the function with a big graph, I receive the following well known error: RuntimeError: maximum recursion depth exceeded in cmp

Even without the above-mentioned question, I know that I need to increase recursion limit with the following commands

If this is relevant I am on Windows 8 64 bit, I have plenty of RAM and I have 64bit python.

Just because for some reason this question received some attention recently, I want to highlight that I was not able to find solution to the problem. After hopelessly trying to solve the problem I gave up and rewrote it without recursion. Also it was annoying, but I spent much less time rewriting the whole algorithm, than I spent investigating this problem. I also want to mention that I do not have previous recursion code, so I will not be able to replicate the problem.

Вот логированная ошибка:

3 ответа

Это решилось установкой pyqt. Я установил pyqt командой (из conda-forge)

В моем случае это была устаревшая библиотека pyqt. У меня сработало вот это ниже.

Проблема исходит не от PyCharm, если вы используете любые другие IDE, результат был бы один и тот же. По сути, все они используют пакет под названием pydev для отладки. Вашим лучшим выбором было бы создать совершенно новую среду Python (PyCharm имеет функцию для этого) и постепенно устанавливать пакеты.

Как исправить код?

Делаю голос.ассистента захотел скоротить дорожку их if-elif-else по видосу с ютуба, теперь код воспринимает любую команду как «Привет» и сразу после ответа на «Привет» идёт ответ на «Как дела» (без запроса на команду) и краш.
вот код:

Простой 1 комментарий

Если бы выучил азы Питона перед тем как делать ботов по видосикам, знал бы, что так словари не работают. Ты можешь сделать немного по другому, если очень хочется:

Или можешь попробовать воспользоваться вот этим моим ответом.

А вот ответ по ссылке как раз для такого предназначен. Там каждому ключевому слову соответствует своя функция, и в этой функции уже может быть что угодно.

I am trying to use knitr in RStudio to make a pdf (using pdflatex/MiKTeX). I’m on a Windows 10 machine. This was working fine until I updated R, RStudio, and MikTeX this month (Feb 2021). I’m getting an error that says,

My file is named testdoc.Rnw and contains:

I would prefer not to switch to TinyTeX. I have tried every suggestion I could find in Rstudio and stack overflow posts. I have looked at log files. I notice I’m not the only one with this problem, but everyone else seems to have a different error number. Please help.

Here is the output from sessionInfo() :

For my environment variables for «path» (and I have tried changing them at the system level) I have tried C:\PROGRA

I did just notice based on a comment that Sys.which(«pdftex») and Sys.which(«pdflatex») both return the same thing and I don’t know if it matters.

I can create a pdf using the tex file either in texstudio or in the command line. Here is the output from running it in the command line:

2 ответа

Я написал функцию, которая добавляет линии из ричТекстБокса в массив и чем добавляет их на график. double y[] = < 0 >; double x[] = < 0 >; String^ name = Pobrana moc; chart1->Series->Clear(); chart1->Series->Add(name); for (int i=0; i Lines->Length; i++)< y[i].

Так проблема заключается в self в двух экземплярах, во первых как аргумент в def accepted а во вторых в self.accepted когда я его вызываю.

У вас в методе не используется ‘self’, поэтому его можно было превратить в статический метод:

Comments

mike-c999 commented Feb 26, 2020

define model

model = Sequential()
model.add(layers.LSTM(units=100,return_sequences=True,input_shape=(batch_size,n_input)))
model.add(layers.LSTM(units=50,return_sequences=True,input_shape=(batch_size,n_input)))
model.add(layers.LSTM(units=25,return_sequences=False,input_shape=(batch_size,n_input)))
model.add(Dense(units=1))

Create a pic of the model

plot_model(model, to_file=’model_plot.png’, show_shapes=True, show_layer_names=True)

compile the model

model.compile(optimizer=optimizers.Adam(learning_rate=0.0001), loss=’mse’, metrics=[‘mse’])

callback: Save the model if it improves

filepath=»weights/weights-improvement-—.hdf5″
checkpoint = ModelCheckpoint(filepath, monitor=’mse’, verbose=1, save_best_only=True, mode=’min’)

txtFile = open(‘mse’ + «.txt», «w+», buffering=1)
save_op_callback = LambdaCallback(on_epoch_end = lambda epoch, logs: [createTXT(txtFile,epoch,logs[‘mse’])],on_train_end = lambda logs: txtFile.close())

fit the model

callbacks_list = [checkpoint, save_op_callback]
model.fit(X_train, y_train,epochs=999999,batch_size=batch_size,verbose=3,validation_data=(X_test,y_test),callbacks=callbacks_list)
`

The text was updated successfully, but these errors were encountered:

Python crashes when I try to open a custom imported PyQt5 window class

I am a bit of a rookie when it comes to Python, and even more so with PyQt5. With that said, I am not sure how to move forward with the error I am getting, and I am hoping someone can give me some wisdom here.

I am trying to connect an external test PyQt5 window script file to my main GUI structure. I have made a simple drop down menu GUI with a button that is supposed to run the external script that will open another window. I am trying to execute it with this command: test_dropButton.action.triggered.connect(testWindowButton)

I keep getting an interesting error that seems to hint that Python is crashing as I get this error:

I have also seen explanations of this error as a threading issue in which trying to run an external script can cause Python to crash due to threading issues. Perhaps I need to multi thread the external python script?

Either way, can someone explain to me the above error, and tell me exactly what is going on, and why it might be crashing?

Here is my code:

Here is the imported script:

I expect the program to open a single main window with a drop down menu with a single menu labeled «test» with a button names «test» that runs an imported script that opens another window.

Tensorflow crashes python when using Keras Convolution/Max Pooling layers on rtx 3070 #45611

Comments

taylrcawte commented Dec 11, 2020

System information

Current Behavior
Running «Code 1» [in standalone code sect.] works fine and engages the GPU, obviously the results are garbage but it is an illustrative example.

By adding either a convolutional layer, max pooling layer, or both and running «Code 2» [in standalone code sect.] causes python to crash and yields the terminal output in the «other info» section. The error comes when the model.fit(. ) call is made; the model is able to compile successfully but crashes on the first epoch of training.

Expected behavior
Since the standard sequential ANN trains fine on the GPU i would expect the CNN to be able to train as well.

Standalone code to reproduce the issue

Other info / logs

The text was updated successfully, but these errors were encountered:

Tensorflow 2.5/2.4 ptxas and gpu issue #50562

Comments

seermer commented Jul 1, 2021 •

Please make sure that this is a build/installation issue. As per our GitHub Policy, we only address code/doc bugs, performance issues, feature requests and build/installation issues on GitHub. tag:build_template

System information

when running CNN, log shows:

the log also shows that it is potentially using CPU and oneDNN, even though gpu is available (and tf obviously can find it according to log)
the same message appears for combinations of tf2.4.0/2.4.2/2.5.0 with cuda11.0/11.1/11.2.1/11.2.2 (I tried several of these combinations, and the message always exist)
current combination on my machine: tf2.5.0+cuda11.2.1

also tried: adding ptxas.exe path to system PATH
doesn’t help

note: this is just for demonstration, the same logging message appears whenever I use Conv2d in model

The text was updated successfully, but these errors were encountered:

Код исключения Windows 7: 0xc0000409

У меня есть C++ windows приложение, которое было сделано другим программистом, что мне пришлось удалить одну строчку кода. После пересборки приложения с visual studio 2013 оно вылетает с вот этим в журнале событий:

Приложение использует QT 4.7.4, и компилируется без ошибок. Я программист встраиваемых систем и имею очень мало опыта программирования windows. Что я могу сделать, чтобы разобраться почему оно крашиться?

3 ответа

Я давно пишу WinForms код, который использует BackgroundWorker для некоторой async-работы, а затем для обновления UI, когда она сделана; я использую Windows 7. Было несколько случаев, когда я был невнимателен, и обращался к UI-компонентам на дочернем потоке. Почему-то это работало нормально, но.

Подсказка к проблеме есть в коде исключения: 0xc0000409

0xc0000409 означает STATUS_STACK_BUFFER_OVERRUN.

Как вы отлаживаете такое? Есть несколько вариантов:

1) Перезапустите этот в отладчике и посмотрите его краш, отрабатывайте что не получилось.

2) Если у вас получился краш дамп этого, загружайте что в отладчике, попадайте по F5 и отрабатывайте что не удалось.

3) Если у вас нет краш дампа вы можете еще попытаться выяснить причину краша если знаете абсолютный адрес краша (и знаете модуль всегда грузится по фиксированному адресу), или если знаете смещение места краша от начала сбойного модуля.

Информация о краше выше говорит вам смещение в сбойный модуль краша. Вот об этом сообщается в поле Fault Offset. В вашем примере, то есть смещение 0x0000bd7f.

Если у вас есть оригинальный dll/exe и он совпадающий PDB, просто загрузите его в DbgHelpBrowser, зайдите в меню Запрос, выберите «Find Symbol with DLL Relative Address. « затем введите в поле смещение и нажмите «Find Symbol. «. Дисплей переместится, чтобы показать вам ближайший совпадающий символ, выделив символ и отобразите любую инфу о параметрах, номерах строк и исходном коде.

Дисклеймер. Я написал этот инструмент, чтобы сделать как раз эту работу для нашего в домашнем использовании. Мы недавно сделали его доступным для всех остальных. Я нашел этот вопрос, пока пытался понять, что означает код исключения 0xc0000409.

Попробуйте создать краш дамп для приложения. См. this StackOverflow question и документацию MSDN о том, как это сделать. Раз у вас есть файл краш дампа, откройте его в отладчике Visual Studio и вы сможете увидеть исключение и стек вызовов для исключения, что должно помочь.

enable_categorical=True results in error code 0xc0000409 about xgboost HOT 2 CLOSED

Fitting a XGBRegressor with enable_categorical=True on a Windows 10 machine results in an error. See below for a minimal example:

Comments (2)

ernesto-dreier commented on May 12, 2022

Thanks for the incredibly quick fix.

Related Issues (20)

Recommend Projects

A declarative, efficient, and flexible JavaScript library for building user interfaces.

Vue.js

🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.

TypeScript is a superset of JavaScript that compiles to clean JavaScript output.

TensorFlow

An Open Source Machine Learning Framework for Everyone

Django

The Web framework for perfectionists with deadlines.

A PHP framework for web artisans

Bring data to life with SVG, Canvas and HTML. 📊📈🎉

Recommend Topics

javascript

JavaScript (JS) is a lightweight interpreted programming language with first-class functions.

Some thing interesting about web. New door for the world.

server

A server is a program made to process requests and deliver data to clients.

Machine learning

Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.

Visualization

Some thing interesting about visualization, use data art

Some thing interesting about game, make everyone happy.

Recommend Org

Facebook

We are working to build community through open source technology. NB: members must have two-factor auth.

Microsoft

Open source projects and samples from Microsoft.

What does «Process finished with exit code 1» mean?

2 Answers 2

Trending sort

Trending sort is based off of the default sorting method — by highest score — but it boosts votes that have happened recently, helping to surface more up-to-date answers.

It falls back to sorting by highest score if no posts are trending.

Switch to Trending sort

0 and 1 are exit codes, and they are not necessarily python specific, in fact they are very common.

exit code (0) means an exit without errors or issues.

exit code (1) means there was some issue / problem which caused the program to exit.

The effect of each of these codes can vary between operating systems, but with Python should be fairly consistent.

0 and 1 are exit codes.

exit code (0) means an exit without an errors or any issues, can be a compile time error or any dependency issue.

Localhost disconnects automatically when a socket tries to connect #8

Comments

RupanRC commented Jun 14, 2016

XMLHttpRequest cannot load http://localhost/socket.io/?EIO=3&transport=polling&t=LLEzHd_. No ‘Access-Control-Allow-Origin’ header is present on the requested resource. Origin ‘http://localhost:8080’ is therefore not allowed access. The response had HTTP status code 404.

This error pops out in the dev console.

The text was updated successfully, but these errors were encountered:

RupanRC commented Jun 14, 2016 •

Solved this by placing the socket.io.js locally in a socket.io folder

Now after everything The app closes while opening the web page localhost:3000
and the same thing happens in 8080 port too

«C:\Program Files (x86)\JetBrains11\WebStorm 2016.1\bin\runnerw.exe» «C:\Program Files\nodejs\node.exe» server.js
Camera started
HTTP server listening on port 3000
err
err
face Captured
image Captured // my console.logs

It happens exactly when the page loads up
«
routes/socket.js:
var cv = require(‘../../lib/opencv’);

// camera properties
var camWidth = 320;
var camHeight = 240;
var camFps = 10;
var camInterval = 1000 / camFps;

// face detection properties
var rectColor = [0, 255, 0];
var rectThickness = 2;

Stack Buffer Overrun error with QODBC #567

Comments

jamiebull1 commented May 8, 2019

Environment

Issue

When I try to fetch results from QODBC tables, the python process terminates with a (0xC0000409) STATUS_STACK_BUFFER_OVERRUN error. An MCVE below:

I’ve tested in the QODBC QB Demo.vb app and the «SELECT TOP 10 * FROM Invoice» query runs with no error.

This doesn’t happen with all tables. I’ve found the error occurs with «Account», «Invoice» and «InvoiceLine» so far. I’ve also tried with the «SP_TABLES» stored procedure, and the «AccountTaxLineInfo» table and not had the error.

The text was updated successfully, but these errors were encountered:

v-chojas commented May 8, 2019

Please provide an ODBC trace, it will help greatly to determine where the problem is.

jamiebull1 commented May 8, 2019 •

And in there I see this error, but I don’t know how to interpret what it’s telling me.

v-chojas commented May 8, 2019

I see in the trace that the table has 29 columns, but it abruptly cuts off after reading the data for the 2nd column. Could you try selecting the columns one at a time, and see which one(s) cause the crash? The ODBC driver you’re using only supports a very early version (2.5) of the ODBC standard, but I don’t see anything that would absolutely prevent pyODBC from working with it (that error you see is just pyODBC trying to determine which datatypes are supported.)

jamiebull1 commented May 8, 2019 •

I’ve had this working before so I know that pyODBC at least used to work for this. There was an update for QuickBooks recently which may have meant a change to the datatypes.

Table spec with details of the columns is here.

Succeeds on everything else. Maybe worth noticing that these three are the only date/time-related columns, although they are two different datatypes.

(adding trace of a failing column in case it’s useful)
SQL.LOG

gordthompson commented May 10, 2019

It looks like the

error is unrelated. As @v-chojas said, that is happening during the initial connection setup as pyodbc is determining what certain data types «look like» when using a particular driver.

The rest of the latest SQL.LOG looks normal except that it is truncated, presumably at the point that the Python interpreter tanks. pyodbc had just successfully completed a SQLGetData so it looks like the sequence of bytes returned by the ODBC driver were in a form that pyodbc did not expect.

Two possibilities for further troubleshooting:

Run the same query in QODBC’s Demo.vb app and provide the ODBC trace from that run for comparison.

Perhaps Wireshark might be useful to see what is in the data payload that the server is returning in response to the SQLGetData request.

Process finished with exit code 1073740791 0xc0000409

I checked a lot of information on the Internet, and most of these errors are caused by not paying attention to the memory allocation problem when doing the neural network, and the batch of one-time tr.

Problem Description When I use Pycharm to read the QICON of Pyside2, I moved the code of the image to the most beginning of the program, and the resulting program cannot run. An error is as follows: B.

Mask-RCNN training stops without any specific error

I have the following problem while trying to use Mask RCNN (not exactly this build(?) but some slightly modified one that allows the use of newer Tensorflow versions) to train a model to detect some objects. For this I modified the aproach shown here. It almost worked by using my CPU but it took 1,5 hours, did not deliver results (after going through the batches it stopped doing anything instead of saving the hopefully generated weights) and was not even the whole dataset. So I tried to get it to work on my GPU, which is not some high-end one but hopefully should still do it faster but I’m currently stuck with a problem. Namely it appears to «crash» without any specific error message shortly after allegedly starting the training process. The last thing one sees is a bunch of warnings like this one:

And the process finishes with this:

As I currently am also low on storage on my main drive I also noticed that it suddenly got even scarcer. The reason is that after each time I tried to execute the process it created pretty large (656 MB) crash dumps. Using windbg to open it got me this information:

So it may or may not have something to do with CUDNN. Another thing that may have something to do with it is the GPU, as it has a 100% spike at the crashing moment in the «Copy-section of the task manager.

Anyways I’m not sure how to proceed so maybe someone here can suggest what could resolve this problem. Thanks!

Why my tensorflow do not perform properly

I tried to work tensorflow on my computer but the error message shows as follows1, I did install the tensorflow by following the exact instruction of the official website through pip, I do not understand why it happens. Does anyone have the same question as me?

I think the problem is at the exit code, but I do not find any information about this code.

1 Answer 1

Please check if you have installed CUDA, cuDNN version compatible to your tensorflow version. You can check the build configurations details here.

Not the answer you’re looking for? Browse other questions tagged python tensorflow or ask your own question.

Hot Network Questions

Subscribe to RSS

To subscribe to this RSS feed, copy and paste this URL into your RSS reader.

By clicking “Accept all cookies”, you agree Stack Exchange can store cookies on your device and disclose information in accordance with our Cookie Policy.

Process finished with exit code 1073740791 0xc0000409

This forum has migrated to Microsoft Q&A. Visit Microsoft Q&A to post new questions.

Asked by:

Question

I have created a C# application, having 3 projects:

Here, I have a simple class in C++ project which I am exporting and calling a very simple method of this class from CLI project.

The code builds fine, but once I try to run it, it exits with the following output messages:

It works fine if I am creating a class object in the heap. The error is coming if I create static object instance.

My file is named testdoc.Rnw and contains:

Here is the output from sessionInfo() :

For my environment variables for «path» (and I have tried changing them at the system level) I have tried C:\PROGRA

I did just notice based on a comment that Sys.which(«pdftex») and Sys.which(«pdflatex») both return the same thing and I don’t know if it matters.

I can create a pdf using the tex file either in texstudio or in the command line. Here is the output from running it in the command line:

Русские Блоги

Используйте Pycharm Runing Pyqt5 Project, отображается ниже:

Обратите внимание на себя:

Здесь, три самосвязки, в противном случае intoneDitton1.settext в pushbutton1_clicked и вышеупомянутый initui не является объектом, после запуска щелкните кнопку, символы в текстовом поле не могут измениться, картонные отчеты неверны, изменены в верхнем и нижнем да Отказ

Интеллектуальная рекомендация

Самый простой, но самый простой оператор самоприращения ++ на языке C (например)

Оператор SQLite (1): табличные операции и ограничения

Один, операции, связанные с таблицами Создать таблицу Пример: Удалить таблицу Пример: При удалении таблицы, чтобы избежать ошибок, вы также можете добавить оператор IF EXISTS, например: Изменить табли.

Просмотреть справочную документацию Python

просмотр функции dirСвойства объекта __doc__ ПросмотрСправочная документация по атрибуту объекта просмотр функции справкиСправочная документация по атрибуту объекта.

Кривая зрелости новых технологий Gartner 2018 (пять технологических трендов)

Источник изображения: Unsplash источник Технологический альянс архитекторов Если вам нужно перепечатать, пожалуйста, свяжитесь с первоначальным автором для авторизации Недавно Gartner опубликовал нову.

Как PyCharm запускает скрипты Python?

Несколько дней назад у меня возникали проблемы при попытке запустить модели Tensorflow с включенным CUDA, и долгое время я не мог решить проблему в целом, потому что PyCharm отображал совершенно бесполезное сообщение

Затем я запустил VSCode, запустил тот же код в PowerShell и получил красивое и подробное сообщение об ошибке, которое позволило мне решить все проблемы в течение получаса (то же самое и при запуске в cmd). Остальные выходы также несколько отличаются. Это заставляет меня предположить, что PyCharm запускает скрипты в каком-то собственном терминале, а не полагается на cmd или PowerShell.

Кто-нибудь знает, так ли это?

1 ответ

Это заставляет меня предположить, что PyCharm запускает скрипты в каком-то собственном терминале, а не полагается на cmd или PowerShell.

Не обязательно. Тот факт, что PyCharm отображает настраиваемое сообщение об ошибке, не означает, что он не полагается на cmd. Вот скрипт Python, который имитирует то, что PyCharm делает с помощью cmd:

Process finished with exit code 1073740791 0xc0000409

The new computer in the lab uses the i3-6100 processor. After installing abaqus6.13-1, the CAE interface can be opened and can be modeled, but after submitting the analysis, it appears.

This is still the case after reloading. It is heartbreaking when I install the 2016CAE and it is stuck at 1174Mb. After several tossings, I re-examined the error and found that the solver could not connect, but the msg system could not connect to the information system. In the next line, I saw the error code 1073740791. When I found the code in Baidu, I got the following.linkAlthough the error code is not the same after a few digits, but after successfully changing the problem according to its method, I feel very happy.
To summarize, the main reason for the problem is that the CPU of the new platform is causing a dynamic link library to not work properly. In addition, after the problem occurs, you should check the error code in the first time, instead of reinstalling it purposelessly, and have a purposeful arrangement.

Intelligent Recommendation

First, the problem description When using Pycharm to run a deep learning network, the following error occurred: Second, the problem analysis The above error occurs, and the general graphics card is no.

Abaqus error finishing and solution

This article was founded on April 3, 2022, and I want to organize me in using the error encountered in the Abaqus process, analyze the reason and solve it, for reference only. Article catalog Start an.

Unknown error with QThread after emiting finished signal

I am building an application in PyQt5. There is a point in my code with high computational demand that takes a long time, so to prevent the GUI from freezing I am using QThrads.

I have a process thread to do the calculations, but I use a different thread to give the user feedback (with help of a progress bar), that the program is actually working. I need to do this because the computation happens i a block, so I can not update my progress bar based on the state of the calculation. I create 2 threads and 2 workers based on the same method, yet when I emit the finish signal of the second worker (signaling that the work is done), the program crashes and throws an error without explanation. The same happens sometimes in debug mood too.

An example where the same problem occurs:

The error does not happen all the time:

I tried to debug it, but I just can’t figure out the cause of the problem.

Windows: «PyEval_RestoreThread: NULL tstate» in tkinter example #535

Comments

ryanalder commented Sep 11, 2019

Steps to reproduce:

I have tested this on two machines (same software versions). 100% reproducible for me so far. Doesn’t matter when during execution this happens, even after using the browser for a while if you repeat steps 3 and 4 it will crash.

The text was updated successfully, but these errors were encountered:

cztomczak commented Sep 11, 2019

Tkinter example was tested using Tk 8.5 on Windows and Tk 8.6 on Linux. You can try downgrading Tk version and see if the issue reproduces.

ckn12345 commented Jan 3, 2020

I see the same issue:
[tkbrowser.py] CEF Python 66.0
[tkbrowser.py] Python 3.7.1 64bit
[tkbrowser.py] Tk 8.6.8
Fatal Python error: PyEval_RestoreThread: NULL tstate
.
Current thread 0x00003114 (most recent call first):
File «C:\Program Files\Python37\lib\tkinter_init_.py», line 1283 in mainloop
File «j:\X-Plane Common\WinterSceneryProject\tkbrowser.py», line 60 in main
File «j:\X-Plane Common\WinterSceneryProject\tkbrowser.py», line 385 in

commenting the call to self.browser_frame.focus_set() in:

solves the problem.

cztomczak commented Jan 3, 2020

What about focus issues when you comment that code out?

ckn12345 commented Jan 3, 2020

Hi Czarek,
no issue in your example script with steeling the focus. However, in my integration where I attach the browser to a tk.Frame instead of the tk Window, I need to click out side of the application to enable any interaction with any native tk widget, very strange.
root = tk.Tk()
root.geometry(«600×400»)
frame = tk.Frame(root)
frame.pack(fill=tk.BOTH, expand=tk.YES)
frame.text = tk.Entry(frame)
frame.text.pack()
# cef.Initialize()
browser = MainFrame(frame)
cef.Initialize()
browser.mainloop()
cef.Shutdown()

cztomczak commented Jan 3, 2020

See Issue #255 and in source code comments that reference that issue. See any «focus» calls in the example and make it work similarly in your app. You can also try running with Tk 8.5 which doesn’t throw the «NULL tstate» error.

ckn12345 commented Jan 3, 2020

Thanks a lot, I looked #255 already. Will try to mimic all of the focus calls from your example and report back, once successfull.

ckn12345 commented Jan 3, 2020

Ok. if found the 2 pieces to make it work, thank you very much.

The browser is attached to a tk.Notebook in my application:

This works now smoothly, even with the changes to the focus handler reverted:

cztomczak commented Jan 3, 2020

Can you reproduce the issue with the official example originally reported by ryanalder here in first comment?

ckn12345 commented Jan 3, 2020

In your original implementation I can. I will make the 2 changes and report back

ckn12345 commented Jan 3, 2020

It works without steeling focus, however the call in

still needs to be commented out. I am attaching the example script.
tkbrowser.py.txt

cztomczak commented Jan 12, 2020

In tkinter 8.5 on Windows when you drag the window during initial loading you can still see the Fatal Python error: PyEval_RestoreThread: NULL tstate error, however on tkinter 8.6 it works fine.

cztomczak commented Jan 22, 2020

The «PyEval_RestoreThread: NULL tstate» kinds of errors may probably be fixed by using CEF multi-threaded message loop. See this comment: #441 (comment)

ggoo34 commented Feb 23, 2022 •

tkinter dragging window error

Fatal Python error: PyEval_RestoreThread: NULL tstate
Python runtime state: initialized

Current thread 0x00003b14 (most recent call first):
File «C:/Users/1/Downloads/cefpython-66.1/cefpython-66.1/examples/tkinter_.py», line 215 in message_loop_work
File «C:\Users\1\AppData\Local\Programs\Python\Python38\lib\tkinter_init_.py», line 814 in callit
File «C:\Users\1\AppData\Local\Programs\Python\Python38\lib\tkinter_init_.py», line 1892 in call
File «C:\Users\1r\AppData\Local\Programs\Python\Python38\lib\tkinter_init_.py», line 1429 in mainloop
File «C:/Users/1/Downloads/cefpython-66.1/cefpython-66.1/examples/tkinter_.py», line 65 in main
File «C:/Users/1/Downloads/cefpython-66.1/cefpython-66.1/examples/tkinter_.py», line 429 in

I wrote a code and it works as expected for one dataset. When expanding to other datasets, it usually crashes and always returns the following prompt:

It doesn’t always crash in the same place. I’ve isolated the part of my code where it crashes after numerous trial and errors—after line 365 at various numbers of iterations through both loops or right after line 378 but before the program terminates normally. Sometimes it crashes after the whole code has executed but before Python tells me it finished without errors. Sometimes it crashes when writing rows to a table (at different parts each time) and other times it crashes when converting those tables to Excel files. I am pretty sure it hasn’t crashed when sorting the tables, only when writing (with InsertCursor) or converting them. There is no change in crashing frequency or exit code when I clear all the outputs before running the program again. A Windows notification usually pops up telling me that «Python.exe has stopped working» and then Python terminates and my code stops running and it prints that exit code.

I’ve tried to use the PDB debugger and post-mortem debugging stuff and I haven’t been successful. I have Pycharm and have that debugging tool available to me as well. Honestly, this whole debugging thing is really foreign and I’m not sure what I’m supposed to be looking for. I may not have used it correctly, but the post-mortem debugging function didn’t work to tell me about what happened in my code. Step-by-step analysis is super frustrating because it crashes at different points in the code and, again, I don’t know what I’m really supposed to be looking for. After some investigation (explained below), I’m not sure a debugger will even help because I think my computer is causing the crash, not Python or my code.

I exchanged some of the files in the working dataset with larger files and it crashes every time now. Switching back to the original dataset does not result in a crash. So, I think it has something to do with the file size, even though those large files are not directly utilized more than once in the code and play no role in writing tables or conversion to Excel. I did try with a really small dataset (smaller than what I used to write the code) and it crashes less often than it completes, but it still crashes, so that’s a bit perplexing and tells me that it may not really be related to file size at all.

I suspected it might have to do with a corruption of the output folder somehow, and when I changed my output folder name, the code completed using the large dataset for the first time! Then I ran it again and it crashed. I changed the output location of one of my tables within the output folder and it completed again! But then it crashed when I tried it the next time. Then I changed my output folder location from the C:\ drive to the K:\ drive (portable drive) and it crashed. I changed it back to a new folder I created in the C:\ drive and it crashed again.

Some of the suggested fixes have involved setting a recursion limit or setting a stack limit or going through stacks? I have no idea what that means. I don’t even know what a stack is in this context, to be honest. I’m not a computer science person so the inner workings of programming are beyond my current level of understanding (but I am not opposed to having that change).

Googling the error suggests that this is an «Access Violation» that occurs when the computer tries to use memory it shouldn’t be using. This computer has a lot of RAM, so that worries me a bit. Does deleting variables once I don’t need them in the code anymore free up space? If I have a raster with 1 million pixels but I only need 20,000 pixels, would doing some arcpy operations and overwriting the variable name effectively remove the large dataset from the memory?

I think this problem may be able to be overcome by making my code more efficient, but that’s a last-resort effort, honestly. I’ve streamlined my code as much as I am able and I think I may need some serious help getting my outputs the way I want them using different methods. I really don’t feel like this code is particularly taxing on my machine. In fact, I just had the thought to check out what Task manager says about my computer’s performance. Interestingly, Python only crashed about 50% of the time while I was looking at the analytics in the Task manager.

I’m running 64-bit Windows 8.1 with 32-bit Python 2.7.8 in Pycharm 4.0.6 and have ArcGIS 10.3 with the intermediate license, I think. I have 24 GB of RAM/Memory, a 2.13 GHz CPU, a 455 GB C:\ drive that’s 65% full, and some other drives. I saw that Python (32-bit) was listed twice in the processes for some reason and ended one of them. Python never uses more than 14.5% of my CPU/processor during the whole code whether it crashes or not. My memory/RAM usage never goes above 4.1 GB (or 17%) during the whole code whether it crashes or not and my computer «idles» at 3.7 GB (15%). «Disk 0 (G: C:)» jumps up to 100% several times during the code. When it crashes, it seems to happen most often when Disk usage is 100%. However, it does not always crash when Disk usage is 100%; disk usage reaches 100% or into the 90’s at multiple places during my code.

I understand that disk usage has something to do with the read/write speed of my drive. Is my hard drive not powerful enough? Not empty enough? I guess I’ll be testing this program from another drive in the meantime to see what happens.

EDIT 2: I found the «Resource Monitor» functionality and was looking at the read/write levels of Python.exe while I ran the program. I did not notice any patterns in the reading and writing B/sec usage by Python when it did or did not crash. It looks like Python stays open and active well after the program finishes both when it crashes and does not crash. This is in contrast to the «Processes» tab in the task manager; after crashing or finishing, Python.exe disappears. That’s probably normal behavior though.

EDIT 3: I moved my input files and my output location to the D:\ drive, which has 1.6 TB of storage space free. There are no programs or processes set to run from that drive. So, the input and output locations were changed but my PyCharm and Python.exe are still located on the C:\ drive. It crashed the second time I ran the code and though the C:\ drive was busy, it wasn’t at 100% and the D:\ drive was even less active.

EDIT 4: I updated PyCharm to 4.5.1 and then migrated both Python and PyCharm to the D:\ drive in addition to my inputs/outputs so a majority of the processes should be taking place from there. It still crashed.

EDIT 5: I thought about getting everything in 64-bit and upgrading to Python 3 but after a bit of digging it looks like ArcGIS 10.X *must* use 32-bit Python 2.7.X, so that’s not an option. I upgraded to Python 2.7.9 (32-bit) and ran it again. Still crashed. Then I copied everything to my laptop. My laptop is running 64-bit Windows 8.1, 32-bit PyCharm 4.5.1, and has 32-bit Python 2.7.9. CPU/processor is 2.4 GHz, I have 11.9 GB Memory/RAM and my computer «idles» at 3.3 GB, the C:\ drive has 661 GB free out of 883 GB. I got the code running on my laptop and I actually got a different error and it crashed at a different section twice and the third time crashed at the end and gave the same exit code my desktop is giving. The different laptop exit code happened between lines 295 and 299 at the second iteration through the table both times. The exit code it gave on my laptop was:

EDIT 6: My laptop seems to be alternating between crashing with these two exit codes. It may be worth noting that when the variable «totalArea» is used in line 354, PyCharm flags the variable and says «Name ‘totalArea’ can be not defined. This inspection warns about local variables referenced before assignment.»

EDIT 7: It might be worth noting that my laptop has ArcGIS 10.2 while my desktop has ArcGIS 10.3. Also, I’ve confirmed that the program on my laptop does not crash 100% of the time. I’ve now managed to run it without incident twice in a row.

EDIT 8: I ended up «solving» the problem by rewriting my code. I figured out that the problem originated with the cursors regardless of where the program crashed. After trying to track where and why that was happening, I realized a better use of my time would be to find some other way to do what I wanted to do. When possible, I converted tables into dictionaries or lists and carried out the InsertCursor and UpdateCursor functions with pure Python. This was actually a good thing because the code completes so much faster now.

Я пытаюсь создать приложение React Native на эмуляторе Android.

Есть ли способ решить эту проблему?

Deji Caleb Awoniyi

К сожалению, я не могу написать это как комментарий, но вот ссылка на возможное исправление:

Более подробную информацию о коде ошибки легче найти, выполнив поиск по запросу (0xC0000409). Вы также можете выполнить поиск с «точным соответствием», чтобы найти более подробную информацию. У меня нет опыта работы с «React Native», но я надеюсь, что он укажет вам правильное направление.

Другие вопросы по теме

Исправление ошибки 0xc0000409 при обновлении или установке Windows 10

Ошибка с кодом исключения 0xc0000409, судя по отчетам пользователей, появляется только в одной конкретной сборке Windows 10 Insider Preview 19624. Причин для данного сообщения может быть сравнительно много, в том числе повреждение системных файлов, неправильная установка обновления, нарушение отдельных записей в реестре. Однако часто исправление заключается в обновлении Windows, с ним приходит и улучшение ситуации. Вот те действия, которые помогут исправить ошибку 0xc0000409 в Windows 10.

Почему появляется ошибка 0xc0000409?

Помимо классических причин сбоев и тех, что мы перечислили выше, очень часто появление кода ошибки 0xc0000409 вызывает:

Как исправить ошибку 0xc0000409 в Windows 10?

При большинстве из перечисленных выше ошибок могут сработать способы ниже. Каждая из них позволяют исправить сразу несколько причин сбоев. Это удобно, так как не нужно слишком детально углубляться в изучение конкретного случая с ошибкой 0xc0000409.

Первым делом рекомендуем запустить инструмент поиска проблем с обновлениями в Windows 10. Самый простой способ его активировать – ввести в строку «Выполнить» (открывается сочетанием клавиш Win + R) команду ms-settings:troubleshoot. Там уже останется только выбрать вариант с обновлениями Windows.

Очистить кэш Центра обновлений Windows

Похоже, что даже захламление системы временными файлами от данного модуля может вызывать проблему. Благо, это легко исправить вручную, очистив всевозможный кэш. Плюс способа еще и в том, что освобождается большой объем памяти.

Обновиться после чистого запуска

Данный метод может помочь практически во всех ситуациях, когда проблему вызывает стороннее программное обеспечение: антивирусы, фаерволы, программы и их службы.

Что нужно сделать:

Перезапустить библиотеки инструмента обновления

Чтобы вручную вернуть все компоненты «Центра обновлений Windows» к своему естественному состоянию, нужно воспользоваться командной строкой и ввести некоторую последовательность команд.

net stop cryptSvc

net stop msiserver

net start cryptSvc

net start msiserver

Важно! После каждой команды нужно нажимать Enter, а не вводить их разом.

Скорее всего что-то из перечисленного помогло исправить ошибку 0xc0000409 в Windows 10. Если же у вас более тяжелый случай, придется пробовать восстановить систему: либо откатить к предыдущей точке сохранения, либо с помощью установочной флешки.

-1073740791 (0xC0000409) Ошибка при установке Pixmap на QLabel

Я использую PyQt и OpenCV для создания приложения, которое отображает канал веб-камеры.

Я изучаю этот код из:

OpenCV Python GUI Development Tutorial 10: Display WebCam Video Feed on QLabel

Любая помощь приветствуется. Спасибо!

В вашем коде есть несколько ошибок:

image не является обязательным атрибутом класса, поскольку вы используете его только в функции.

As sadly as Python/PyQt does not give give specific error messages about things like these, I am only getting this error code when running my code.

PyQt5 run sklearn calculations on a separate QThread

I am creating a PyQt5 application and want to run some ML code in a separate thread when a button is clicked. I am unable to do so. This is my threading code:

And the class RunThread is as follows:

Running it normally doesnt work. Pycharm quits with the following error:

Running it in debug mode throws thousands of warnings thrown by sklearn saying:

The code runs eventually, but it takes a lot more time (at least 4x times) to do so.

Could someone please let me know what the issue here is?

1 Answer 1

The warning from sklearn is pretty explicit here. Basically you cannot train sklearn models with hyperparameter n_jobs set to anything greater than 1 when executing from a nested thread.

That being said, without seeing what is going on inside of simulation.start_simulation() it’s hard to conjecture.

Alternatively, you may try writing your ML code as a standalone script and execute it using QProcess. That may allow you to utilize n_jobs greater than 1.

Источники:

Process finished with exit code 1073740791 0xc0000409

-1073740791 (0xC0000409) Error when setting Pixmap on QLabel

1 Answer 1

2 Answers 2

Trending sort

Comments

vybhav72954 commented Feb 7, 2021

2 Answers 2

Trending sort

Training Script failed with no Error Stack «exit code 1073740791 0xc0000409» #13679

Comments

OisinWatkins commented Jan 9, 2020 •

2 Answers 2

Trending sort

2 Answers 2

Trending sort

Not the answer you’re looking for? Browse other questions tagged python-3.x pycharm or ask your own question.

Related

Hot Network Questions

Subscribe to RSS

Решение

4 Answers 4

Trending sort

Why does PyQt crashes without information? (exit code 0xC0000409)

2 Answers 2

Trending sort

2 Answers 2

Trending sort

Process finished with exit code 1073740791 0xc0000409

Asked by:

Question

Как настроить PyCharm что бы программа при выполнении не вылетала?

-1073740791 (0xC0000409) Error when setting Pixmap on QLabel

1 Answer 1

-1073740791 (0xC0000409) Ошибка при установке Pixmap на QLabel

1 Answer 1

Use the text as init argument

Set the text from the parent

2 Answers 2

Trending sort

Русские Блоги

2 Answers 2

Trending sort

Process finished with exit code 1073740791 0xc0000409

Comments

TomerEphraim commented Jan 5, 2021 •

Process finished with exit code 1073740791 0xc0000409

Output result (normal output of other models):

Solution (refer to online tutorial):

Intelligent Recommendation

More Recommendation

Другие вопросы по теме

Похожие вопросы

Comments

dht5432 commented Dec 3, 2019

howardgriffin commented Mar 27, 2020

Footer

1 ответ

How to fix ‘RuntimeError: input(): lost sys.stdin’ error in python 3.7

7 Answers 7

Trending sort

What does «Process finished with exit code 1» mean?

2 Answers 2

Trending sort

Process finished with exit code 1073740791 0xc0000409

PyQt5 fails with cryptic message

1 Answer 1

1 ответ

Похожие вопросы:

PyQt5 fails with cryptic message

1 Answer 1

Странный exit code

Решение

Comments

jmickela commented Aug 11, 2016

ArtemGr commented Aug 12, 2016 •

sundhaug92 commented Aug 12, 2016

ArtemGr commented Aug 12, 2016

ArtemGr commented Aug 12, 2016

ArtemGr commented Aug 12, 2016