Pycharm process finished with exit code 0

Pycharm exit code 0

For example, if i were to just print(«hellow»):

Is there any way to make the output just «hellow»?

3 Answers 3

Trending sort

Trending sort is based off of the default sorting method — by highest score — but it boosts votes that have happened recently, helping to surface more up-to-date answers.

It falls back to sorting by highest score if no posts are trending.

Switch to Trending sort

You realize it is not part of the output right? It’s just additional information provided by the IDE’s console. The real program is just outputting hellow as expected.

Saying that the Process finished with exit code 0 means that everything worked ok. If an exception occurs in your program or otherwise an exit is generated with non-zero argument, the IDE is gonna inform you about this, which is useful debug information.

You’re not supposed to run your Python programs from the IDE when in production so I think trying to remove that is irrelevant.

Though Pycharm gives no output. Only Process finished with exit code 0 And I don’t understand why. Yesterday I was working in Pycharm and everything was fine. Thank you in advance.

3 Answers 3

Trending sort

Trending sort is based off of the default sorting method — by highest score — but it boosts votes that have happened recently, helping to surface more up-to-date answers.

It falls back to sorting by highest score if no posts are trending.

Switch to Trending sort

right click anywhere in the page you are at, and click Run «Page_name» to run that page and set the current page-to-run to that page.

You are not running the correct file. You are running example_1.py instead of exercises.py

Pycharm runs the example_1.py. You need to run your own file which is exercises.py

Not the answer you’re looking for? Browse other questions tagged python pycharm or ask your own question.

Related

Hot Network Questions

Subscribe to RSS

To subscribe to this RSS feed, copy and paste this URL into your RSS reader.

By clicking “Accept all cookies”, you agree Stack Exchange can store cookies on your device and disclose information in accordance with our Cookie Policy.

PyCharm: процесс завершен с кодом выхода 0

Я новичок в PyCharm, и у меня есть «Процесс завершен с кодом выхода 0» вместо получения (683, 11) в результате (см. Вложение), не могли бы вы мне помочь, пожалуйста? Очень признателен!

Ответов (9) 9

В программе нет необходимости exit явно вызывать функцию, когда она выполняется успешно, она вызывает exit (0) по умолчанию, вызывает exit(not_zero_num) при неудачном запуске.

Вы также можете вызвать exit функцию с разными code(num) для анализа.

Вы также можете посмотреть https://en.wikipedia.org/wiki/Exit_(system_call) для получения более подробной информации.

Я просто столкнулся с этим, но даже не смог запустить простую функцию print (‘hello world’).

Оказывается, брандмауэр Comodo останавливал печать сценария. Это довольно просто исправить, удалив Python из раздела «Настройки»> «Дополнительно»> «Анализ скриптов» Comodo.

Когда это случилось, у меня сработало то, что я

exit code 0 означает, что код запускается без ошибок.

Вы также можете определить код выхода для анализа, например:

Я бы порекомендовал вам ознакомиться с exit кодами.

exit 0 означает отсутствие ошибки.

exit 1 означает, что в вашем коде есть ошибка.

Это не зависит от pyCharm или python. Это очень распространенная практика в большинстве языков программирования. Где exit 0 означает успешное выполнение программы, а ненулевой код выхода указывает на ошибку.

Это хорошие новости! Это означает, что в вашем коде нет ошибки. Вы прогнали его насквозь, и в этом нет ничего плохого. Pycharm возвращает 0, если не обнаружил ошибок (плюс любой вывод, который вы ему даете), и возвращает 1, а также сообщение об ошибке при обнаружении ошибок.

Редакторы и скрипты не ведут себя как интерактивный терминал, когда вы запускаете функцию, он не показывает результат автоматически. Вам нужно сказать ему, чтобы он сделал это сам.

Обычно вы просто распечатываете результаты.

Process finished with exit code 0

So I expect that it prints like this:

But In pycharm in the console it only prints this:

Where you can see the output?

I also add a attachment for clearness.

2 Answers 2

Trending sort

Trending sort is based off of the default sorting method — by highest score — but it boosts votes that have happened recently, helping to surface more up-to-date answers.

It falls back to sorting by highest score if no posts are trending.

Switch to Trending sort

The problem is that reset and calculate_distance functions aren’t in the Point class because of lack of indentation.

Try this. Now the functions are methods for Point class and all is working properly:

There is a window called «python console». The output of your script should be there.

Process finished with exit code 0

So I expect that it prints like this:

But In pycharm in the console it only prints this:

Where you can see the output?

I also add a attachment for clearness.

2 Answers 2

Trending sort

Trending sort is based off of the default sorting method — by highest score — but it boosts votes that have happened recently, helping to surface more up-to-date answers.

It falls back to sorting by highest score if no posts are trending.

Switch to Trending sort

The problem is that reset and calculate_distance functions aren’t in the Point class because of lack of indentation.

Try this. Now the functions are methods for Point class and all is working properly:

There is a window called «python console». The output of your script should be there.

Python message: Process finished with exit code 0

I get a Python message that says

Process finished with exit code 0.

I do not see any error codes. I made sure the path to my data source is correct. I checked in settings and show that the pandas and matplotlib libraries are installed.

The data source is list of mock IP address and code is suppose to print the list of IP address in descending order. As mentioned before, I only get the «Process finished with exit code 0.»

Any help is greatly appreciated.

3 Answers 3

Trending sort

Trending sort is based off of the default sorting method — by highest score — but it boosts votes that have happened recently, helping to surface more up-to-date answers.

It falls back to sorting by highest score if no posts are trending.

Switch to Trending sort

Please correct your code to be

The only thing which I changed in your code is the indentation of your lines.

In your code all commands are part of your function definition, which you never called, so nothing was printed except the message

Process finished with exit code 0.

(Every process finishes with some exit code, and exit code 0 in Python interpreter (as in almost all programs) means that it is OK.

And it is OK, indeed — Python has no chance to reveal what you wanted to do, if you in reality did something other but your code is still syntactically correct, without any run-time error.)

I’m completly stuck on this. I keep getting error message

I’m using pycharm with pyqt5.6 and qt5.6.2 and the problem started when I upgraded to these versions.

I’ve tried searching as much as I can, but have not been able to find an answer. Can anyone help please?

9 Answers 9

Trending sort

Trending sort is based off of the default sorting method — by highest score — but it boosts votes that have happened recently, helping to surface more up-to-date answers.

It falls back to sorting by highest score if no posts are trending.

Switch to Trending sort

Assume you are running under Windows. Application Error code 0xc0000005, also known as Access Violation error, is a common problem experienced by Windows users, regardless of os version. There are various causes to trigger Application Error 0xc0000005. For my case, I’m running debug mode in PyCharm (or Eclipse) with code that includes the following:

It was perfectly fine if execute the same piece of code through PyCharm in non-debug (Run) mode. Disabled the above code in debug mode, issue resolved.

Environment: PyCharm Community 2019.3, Anaconda 3, Python 3.7.3, pympler 0.7, Windows 10 Enterprise

Openpyxl giving error «Process finished with exit code 0», objects not callable

When I am running a code it is giving error like:

When I am running code

it gives me error saying

When I am using

1 Answer 1

When pycharm shows Process finished with exit code 0 This normally means that the program is done and did not throw any errors. So a good thing 🙂

wb.active() is not a method but a WorkSheet object. Access it like this: my_worksheet = wb.active Without the parentheses ()

Read more on the difference between method objects and other types of objects here: https://docs.python.org/3/tutorial/classes.html#a-first-look-at-classes

Not the answer you’re looking for? Browse other questions tagged pycharm openpyxl or ask your own question.

Related

Hot Network Questions

Subscribe to RSS

To subscribe to this RSS feed, copy and paste this URL into your RSS reader.

By clicking “Accept all cookies”, you agree Stack Exchange can store cookies on your device and disclose information in accordance with our Cookie Policy.

I’m completly stuck on this. I keep getting error message

I’m using pycharm with pyqt5.6 and qt5.6.2 and the problem started when I upgraded to these versions.

I’ve tried searching as much as I can, but have not been able to find an answer. Can anyone help please?

9 Answers 9

Trending sort

Trending sort is based off of the default sorting method — by highest score — but it boosts votes that have happened recently, helping to surface more up-to-date answers.

It falls back to sorting by highest score if no posts are trending.

Switch to Trending sort

Assume you are running under Windows. Application Error code 0xc0000005, also known as Access Violation error, is a common problem experienced by Windows users, regardless of os version. There are various causes to trigger Application Error 0xc0000005. For my case, I’m running debug mode in PyCharm (or Eclipse) with code that includes the following:

It was perfectly fine if execute the same piece of code through PyCharm in non-debug (Run) mode. Disabled the above code in debug mode, issue resolved.

Environment: PyCharm Community 2019.3, Anaconda 3, Python 3.7.3, pympler 0.7, Windows 10 Enterprise

Python program compilation issue

Process finished with exit code 0” in the course of running a Python file with JetBrains PyCharm Community Edition 2019.2.

Nothing compiles except for “Process finished with exit code 0” message generated by PyCharm I have an IntelliJ IDEA installed on the same PC and it works fine so I guess this is not an antivirus blocking related issue. Could you please advise? Thank you in advance 😊

2 Answers 2

Trending sort

Trending sort is based off of the default sorting method — by highest score — but it boosts votes that have happened recently, helping to surface more up-to-date answers.

It falls back to sorting by highest score if no posts are trending.

Switch to Trending sort

Assuming that you’re looking to get things working within a single file, I would suggest adding the following to the bottom of your file:

This will cause a new instance of the Dog class to be created when the script is run, you should then see your print statements output to the console.

If your code is indented in the way shown in the original question, then the problem is with the indentation. Currently almost all of the code is sitting within the Dog class, and not at file-level, so it won’t be running when the script is executed, your formatting would need to look like this:

I’m completly stuck on this. I keep getting error message

I’m using pycharm with pyqt5.6 and qt5.6.2 and the problem started when I upgraded to these versions.

I’ve tried searching as much as I can, but have not been able to find an answer. Can anyone help please?

9 Answers 9

Trending sort

Trending sort is based off of the default sorting method — by highest score — but it boosts votes that have happened recently, helping to surface more up-to-date answers.

It falls back to sorting by highest score if no posts are trending.

Switch to Trending sort

Assume you are running under Windows. Application Error code 0xc0000005, also known as Access Violation error, is a common problem experienced by Windows users, regardless of os version. There are various causes to trigger Application Error 0xc0000005. For my case, I’m running debug mode in PyCharm (or Eclipse) with code that includes the following:

It was perfectly fine if execute the same piece of code through PyCharm in non-debug (Run) mode. Disabled the above code in debug mode, issue resolved.

Environment: PyCharm Community 2019.3, Anaconda 3, Python 3.7.3, pympler 0.7, Windows 10 Enterprise

Whenever I try to enter something in an input, it just says «process finished with exit code 0» (Using pycharm)

Whenever I try to enter something into the prompt, it says «process finished with exit code 0» and doesn’t activate my next line of code!

I’ll use «—» to indicate where my code is that isn’t activating (below the line):

1 Answer 1

is checks if two objects are the same object, it works with integers, but strings are always different objects.

You may want to do :

(Code 0 is a good sign, no error detected, like syntax or NameError)

Not the answer you’re looking for? Browse other questions tagged python pycharm or ask your own question.

Related

Hot Network Questions

Subscribe to RSS

To subscribe to this RSS feed, copy and paste this URL into your RSS reader.

By clicking “Accept all cookies”, you agree Stack Exchange can store cookies on your device and disclose information in accordance with our Cookie Policy.

I’m completly stuck on this. I keep getting error message

I’m using pycharm with pyqt5.6 and qt5.6.2 and the problem started when I upgraded to these versions.

I’ve tried searching as much as I can, but have not been able to find an answer. Can anyone help please?

9 Answers 9

Trending sort

Trending sort is based off of the default sorting method — by highest score — but it boosts votes that have happened recently, helping to surface more up-to-date answers.

It falls back to sorting by highest score if no posts are trending.

Switch to Trending sort

Assume you are running under Windows. Application Error code 0xc0000005, also known as Access Violation error, is a common problem experienced by Windows users, regardless of os version. There are various causes to trigger Application Error 0xc0000005. For my case, I’m running debug mode in PyCharm (or Eclipse) with code that includes the following:

It was perfectly fine if execute the same piece of code through PyCharm in non-debug (Run) mode. Disabled the above code in debug mode, issue resolved.

Environment: PyCharm Community 2019.3, Anaconda 3, Python 3.7.3, pympler 0.7, Windows 10 Enterprise

Process finished with exit code 137 in PyCharm

When I stop the script manually in PyCharm, process finished with exit code 137. But I didn’t stop the script. Still got the exit code 137. What’s the problem?

Python version is 3.6, process finished when running xgboost.train() method.

11 Answers 11

Trending sort

Trending sort is based off of the default sorting method — by highest score — but it boosts votes that have happened recently, helping to surface more up-to-date answers.

It falls back to sorting by highest score if no posts are trending.

Switch to Trending sort

If you didn’t manually stop the script and still got this error code, then the script was killed by your OS. In most of the cases, it is caused by excessive memory usage.

Process finished with exit code 137 (interrupted by signal 9: SIGKILL) Interestingly this is not caught in Exception block either

If you are in Ubuntu, increase the SWAP memory. It will work. Use htop to see SWAP usage, when it is full, it will give error 137.

It’s not always a memory issue. In my case subprocess.Popen was utilized and it was throwing the error as 137 which looks like signalKILL and the cause is definitely not the memory utilization, because during the runtime it was hardly using 1% of memory use. This seems to be a permission issue after more investigation. I simply moved the scripts from /home/ubuntu to the root directory.

I had the same error. In my case was related to excessive memory usage. Solved after reseting/cleaning my cache data adding the following code for every variable that will not be used anymore :

I’ve recently run into this error installing PyCharm on an M1 Mac Mini. It was accompanied by an error that said my SDK was invalid upon compilation of a project. It turns out this was due to my Python Interpreter being pointed at a strange directory, I’m not 100% how this happened.

I went to Preferences > Project:yourProject > Python Interpreter and selected a valid SDK from the drop-down (in my case Python 3.8). You’ll know the package is valid because it will populate the package list below with packages.

Again, not sure how it happened on install, but this solved it.

In my case, my RAM ran out, whether it is real or virtual.

Split your data into small pieces or expand your virtual memory.

I choose the latter.

Following scipts works on my ubuntu 20.04 TLS.

After you run your process, memory will grow.

I’m completly stuck on this. I keep getting error message

I’m using pycharm with pyqt5.6 and qt5.6.2 and the problem started when I upgraded to these versions.

I’ve tried searching as much as I can, but have not been able to find an answer. Can anyone help please?

9 Answers 9

Trending sort

Trending sort is based off of the default sorting method — by highest score — but it boosts votes that have happened recently, helping to surface more up-to-date answers.

It falls back to sorting by highest score if no posts are trending.

Switch to Trending sort

Assume you are running under Windows. Application Error code 0xc0000005, also known as Access Violation error, is a common problem experienced by Windows users, regardless of os version. There are various causes to trigger Application Error 0xc0000005. For my case, I’m running debug mode in PyCharm (or Eclipse) with code that includes the following:

It was perfectly fine if execute the same piece of code through PyCharm in non-debug (Run) mode. Disabled the above code in debug mode, issue resolved.

Environment: PyCharm Community 2019.3, Anaconda 3, Python 3.7.3, pympler 0.7, Windows 10 Enterprise

Here is the logged error:

4 Answers 4

Trending sort

Trending sort is based off of the default sorting method — by highest score — but it boosts votes that have happened recently, helping to surface more up-to-date answers.

It falls back to sorting by highest score if no posts are trending.

Switch to Trending sort

This was solved by installing pyqt. I installed pyqt with the command (from conda-forge)

In my case it was obsolete pyqt library. This following worked for me.

The problem does not come from PyCharm, if you use any other IDEs, the result would be the same. In fact, they all use a package called pydev to debug. Your best bet would be to create a brand new Python environment (PyCharm has a function for this) and gradually install packages.

The code variation v2 is working while v1 throws the same error mentioned by the OP.

Process finished with exit code 0 pycharm

Я новичок в PyCharm, и у меня есть «Process finished with exit code 0» вместо получения (683, 11) в результате (см. Вложение), не могли бы вы, ребята, помочь мне? Очень ценю это!

Это хорошие новости! Это означает, что с вашим кодом нет ошибки. Вы запустили его, и в этом нет ничего плохого. Pycharm возвращает 0, когда он не обнаружил ошибок (плюс любой вывод, который вы ему дали), и возвращает 1, а также сообщение об ошибке при возникновении ошибок.

Редакторы и скрипты не ведут себя как интерактивный терминал, когда вы запускаете функцию, она автоматически не отображает результат. Вам нужно на самом деле сказать, чтобы сделать это самостоятельно.

Обычно вы просто печатаете результаты.

exit code 0 означает, что вы запускаете код без ошибок.

Например, дайте error code (очевидно, на рисунке ниже): в нижнем коде переменная lst является пустым списком, но мы получаем в ней 5 элементов (которые не существуют), поэтому программа выдает IndexError и exit 1 что означает ошибку с кодом.

Вы также можете определить код выхода для анализа, например:

День добрый.
Пытаюсь изучить Flask но в самом начале столкнулся с проблемой: веб сервер не поднимается и программа завершается с Process finished with exit code 0

Работаю через PyCharm, Flask подключил

I am new to PyCharm and I have ‘Process finished with exit code 0’ instead of getting (683, 11) as a result (please see attachment), could you guys help me out please? Much appreciate it!

Best regards, ET

7 Answers 7

That is good news! It means that there is no error with your code. You have run it right through and there is nothing wrong with it. Pycharm returns 0 when it has found no errors (plus any output you give it) and returns 1 as well as an error message when it encounters errors.

Editors and scripts do not behave like the interactive terminal, when you run a function it does not automatically show the the result. You need to actually tell it to do it yourself.

I am trying to use fastText with PyCharm. Whenever I run below code:

The process exits with this error:

What causes this error and what can be done to avoid it?

1 Answer 1

Are you using a windows system? 0xC0000409 means stack buffer overflow as seen in this windows help link.

Below is some advice that is taken from this link to solve similar type of issues.

STATUS_STACK_BUFFER_OVERRUN is a /GS exception. They are thrown when Windows detects ‘tampering’ of a security cookie protecting a return address. It is probable that you are writing something past the end of a buffer, or writing something to a pointer that is pointing to the wrong place. However it is also possible that you have some dodgy memory or otherwise faulty hardware that is tripping validation code.

Another thing you could do is run the code as is on a different PC and see if that fails, this may point to a hardware problem if it doesn’t.

Other strategies are reduce the size of the training file by removing some text and reducing the size of the vocabulary by running some text normalisation.

I’m completly stuck on this. I keep getting error message

I’m using pycharm with pyqt5.6 and qt5.6.2 and the problem started when I upgraded to these versions.

I’ve tried searching as much as I can, but have not been able to find an answer. Can anyone help please?

9 Answers 9

Trending sort

Trending sort is based off of the default sorting method — by highest score — but it boosts votes that have happened recently, helping to surface more up-to-date answers.

It falls back to sorting by highest score if no posts are trending.

Switch to Trending sort

Assume you are running under Windows. Application Error code 0xc0000005, also known as Access Violation error, is a common problem experienced by Windows users, regardless of os version. There are various causes to trigger Application Error 0xc0000005. For my case, I’m running debug mode in PyCharm (or Eclipse) with code that includes the following:

It was perfectly fine if execute the same piece of code through PyCharm in non-debug (Run) mode. Disabled the above code in debug mode, issue resolved.

Environment: PyCharm Community 2019.3, Anaconda 3, Python 3.7.3, pympler 0.7, Windows 10 Enterprise

Python program compilation issue

Process finished with exit code 0” in the course of running a Python file with JetBrains PyCharm Community Edition 2019.2.

Nothing compiles except for “Process finished with exit code 0” message generated by PyCharm I have an IntelliJ IDEA installed on the same PC and it works fine so I guess this is not an antivirus blocking related issue. Could you please advise? Thank you in advance 😊

2 Answers 2

Trending sort

Trending sort is based off of the default sorting method — by highest score — but it boosts votes that have happened recently, helping to surface more up-to-date answers.

It falls back to sorting by highest score if no posts are trending.

Switch to Trending sort

Assuming that you’re looking to get things working within a single file, I would suggest adding the following to the bottom of your file:

This will cause a new instance of the Dog class to be created when the script is run, you should then see your print statements output to the console.

If your code is indented in the way shown in the original question, then the problem is with the indentation. Currently almost all of the code is sitting within the Dog class, and not at file-level, so it won’t be running when the script is executed, your formatting would need to look like this:

Process finished with exit code 1 pycharm

I’m doing my own discord bot, through a lot of mistakes and errors I came to a big same error, and I have no idea what it is.

The above exception was the direct cause of the following exception:

1 Answer 1

That means that the resource you’re trying to access is protected by some kind of authorization. You have to pass an username and password or an authorization token in your request.

I don’t know this discord-bot libary, but I guess that this lib offers some kind of authorization.

Not the answer you’re looking for? Browse other questions tagged python python-3.x or ask your own question.

Related

Hot Network Questions

Subscribe to RSS

To subscribe to this RSS feed, copy and paste this URL into your RSS reader.

By clicking “Accept all cookies”, you agree Stack Exchange can store cookies on your device and disclose information in accordance with our Cookie Policy.

Process finished with exit code 137 in PyCharm

When I stop the script manually in PyCharm, process finished with exit code 137. But I didn’t stop the script. Still got the exit code 137. What’s the problem?

Python version is 3.6, process finished when running xgboost.train() method.

11 Answers 11

Trending sort

Trending sort is based off of the default sorting method — by highest score — but it boosts votes that have happened recently, helping to surface more up-to-date answers.

It falls back to sorting by highest score if no posts are trending.

Switch to Trending sort

If you didn’t manually stop the script and still got this error code, then the script was killed by your OS. In most of the cases, it is caused by excessive memory usage.

Process finished with exit code 137 (interrupted by signal 9: SIGKILL) Interestingly this is not caught in Exception block either

If you are in Ubuntu, increase the SWAP memory. It will work. Use htop to see SWAP usage, when it is full, it will give error 137.

It’s not always a memory issue. In my case subprocess.Popen was utilized and it was throwing the error as 137 which looks like signalKILL and the cause is definitely not the memory utilization, because during the runtime it was hardly using 1% of memory use. This seems to be a permission issue after more investigation. I simply moved the scripts from /home/ubuntu to the root directory.

I had the same error. In my case was related to excessive memory usage. Solved after reseting/cleaning my cache data adding the following code for every variable that will not be used anymore :

I’ve recently run into this error installing PyCharm on an M1 Mac Mini. It was accompanied by an error that said my SDK was invalid upon compilation of a project. It turns out this was due to my Python Interpreter being pointed at a strange directory, I’m not 100% how this happened.

I went to Preferences > Project:yourProject > Python Interpreter and selected a valid SDK from the drop-down (in my case Python 3.8). You’ll know the package is valid because it will populate the package list below with packages.

Again, not sure how it happened on install, but this solved it.

In my case, my RAM ran out, whether it is real or virtual.

Split your data into small pieces or expand your virtual memory.

I choose the latter.

Following scipts works on my ubuntu 20.04 TLS.

After you run your process, memory will grow.

Код выхода Pycharm 0

Как использовать PyCharm бесплатно

Например, если бы я просто напечатал («привет»):

Есть ли способ сделать вывод просто «приветливым»?

Вы ведь понимаете, что это не часть результата? Это просто дополнительная информация, предоставляемая консолью IDE. Настоящая программа просто выводит hellow как и ожидалось.

Сказать, что Process finished with exit code 0 означает, что все заработало. Если в вашей программе возникает исключение или exit генерируется с ненулевым аргументом, IDE сообщит вам об этом, что является полезной отладочной информацией.

Вы не должны запускать свои программы Python из среды IDE во время производства, поэтому я думаю, что попытки удалить это неуместны.

Если вы остановите свой скрипт, и он выдаст исключение, вы можете добавить следующее, за исключением того, что возвращает то же сообщение.

PyCharm: Process finished with exit code 0

Я новичок в PyCharm и у меня есть ‘Process finished with exit code 0’ вместо того чтобы получить (683, 11) в результате (см. вложение), не могли бы вы ребята мне помочь пожалуйста? Много оцените это!

9 ответов

import numpy as np import cv2 cap = cv2.VideoCapture(0) while(True): # Capture frame-by-frame ret, frame = cap.read() # Our operations on the frame come here gray = cv2.cvtColor(frame, cv2.COLOR_BGR2GRAY) # Display the resulting frame cv2.imshow(‘frame’,gray) if cv2.waitKey(1) & 0xFF ==.

Когда я останавливаю скрипт вручную в PyCharm, process finished с exit code 137. Но скрипт у меня не останавливался. Все равно получался exit code 137. В чем проблема? Версия Python стоит 3.6, process finished при запуске xgboost.train() метода.

Это хорошая новость! Значит, что с вашим кодом нет ошибки. Вы его запустили прямо через и с ним нет ничего плохого. Pycharm возвращает 0 когда не нашел никаких ошибок (плюс любой вывод вы ему даете) и возвращает 1 а так же сообщение об ошибке, когда он столкнется с ошибками.

Редакторы и скрипты ведут себя не так, как интерактивный терминал, когда вы запускаете функцию он автоматически не показывает результат. Вам нужно собственно сказать это делать самому.

Вообще у вас просто print результатов.

exit code 0 значит вы код запускаете без ошибки.

Также можно определить exit code для анализа, например:

Я бы рекомендовал вам почитать по exit кодам.

exit 0 означает отсутствие ошибки.

exit 1 означает, что в вашем коде есть какая-то ошибка.

Это не pyCharm или python specific. Это очень распространенная практика в большинстве языков программирования. Где exit 0 означает успешное выполнение программы и ненулевой exit код указывает на ошибку.

Почти вся программа(C++/python/java..) вернет 0 если она запустится успешно. Это не специфично для pycharm или python.

В program нет необходимости вызывать exit функцию явно, когда она запускает success она invoke exit(0) по умолчанию, invoke exit(not_zero_num) когда запускает не удалось.

Так же можно вызвать exit функцию с разными code(num) для анализа.

Так же можно посмотреть https://en.wikipedia.org/wiki/Exit_(system_call) для более подробной информации.

i’m с помощью odoo 10, python версии 2.7 и pycharm 2019.3.2 я задал script path к odoo-bin, python интерпретатор к python.exe (2.7), переменные окружения к PYTHONUNBUFFERED=1, все работает отлично. Сейчас же, я хочу работать с odoo 13 в одно и тоже время, i’ve python версии 3.7 и pycharm 2019.3.2.

Я использую pycharm и там написано Process finished with exit code 0 without my restaurant_list or что угодно после него def main(): # Make a list of resturaunts the resturaunteur could go to restaurants_list = [‘Mcdonalds’, ‘BurgerKing’, ‘Wendys’, ‘PaneraBread’] print(restaurants_list) # Remove.

То, что у меня сработало, когда такое произошло, было зайти в

Я просто столкнулся с этим, но не смог даже запустить простую функцию print(‘hello world’).

Оказывается брандмауэр Comodo останавливал работу скрипта от печати. Это довольно легкое исправление удалением Python из настроек > Дополнительно > Анализ скрипта порцией Comodo.

Похожие вопросы:

Я работаю на node2vec. Когда я использую small dataset код работает хорошо. Но как только я пытаюсь запустить этот же код на large dataset код вылетает. Ошибка: Process finished with exit code 134.

Я работаю над Django-проектом с использованием Pycharm. Я попытался отладить проект, задав брейкпоинты в Pycharm и установил Cython debugger (когда Pycharm дал предложение). Это работало нормально.

import numpy as np import cv2 cap = cv2.VideoCapture(0) while(True): # Capture frame-by-frame ret, frame = cap.read() # Our operations on the frame come here gray = cv2.cvtColor(frame.

Когда я останавливаю скрипт вручную в PyCharm, process finished с exit code 137. Но скрипт у меня не останавливался. Все равно получался exit code 137. В чем проблема? Версия Python стоит 3.6.

i’m с помощью odoo 10, python версии 2.7 и pycharm 2019.3.2 я задал script path к odoo-bin, python интерпретатор к python.exe (2.7), переменные окружения к PYTHONUNBUFFERED=1, все работает отлично.

Я использую pycharm и там написано Process finished with exit code 0 without my restaurant_list or что угодно после него def main(): # Make a list of resturaunts the resturaunteur could go to.

Я использую Pycharm 2017.1 и (который я обновлял в последнее время, но эта проблема возникала раньше) и следующий код в файле main_test: print(‘test’) Когда я запускаю код он показывает следующий.

interactive shell debugging with pycharm

I am new to PyCharm. I have been using IDLE for a long time.

It is very convenient to use Python objects after script execution in IDLE. Is there any way to use script objects after its execution with interactive python shell using PyCharm?

For example, we have a ‘test’ project with one file ‘test.py’:

after execution we can get the result:

How can I use string ‘a’ with interactive shell?

Added after 8 years. My pycharm tutorial in russian: https://youtu.be/-RzKJlLXw54

9 Answers 9

Trending sort

Trending sort is based off of the default sorting method — by highest score — but it boosts votes that have happened recently, helping to surface more up-to-date answers.

It falls back to sorting by highest score if no posts are trending.

Switch to Trending sort

Built-in python shell for the current debugging session

This will enable a python shell (notice the green >>> on the screenshot) where you can access all the variables in the current scope, and do everything you usually do in the Python shell.

In recent pycharm versions you get the full ipython interpreter instead of the plain python shell (if ipython is installed).

The Evaluate expression window

Multiple and multiline expressions are supported: to get a multiline version of the Inspect dialog click the Code fragment mode or select more than one line of code in the editor and then evaluate the expression. You can assign values to existing variables (new ones cannot be defined), and run entire chunks of code.

Mouse hover over variables

To see the value of a variable after you hit a breakpoint in debug mode, hover the mouse pointer over the variable (1-2 seconds) and the value will be shown in a tooltip.

The hint will contain a ➕ icon — clicking it will open the inspector in a popup.

For the variables in scope the inspector is shown in the bottom panel under Debug > Debugger.

For pandas data frames you will see a View as DataFrame link in the variable inspector panel or in the hover popup — clicking the link will display the dataframe as a table in the Data View panel.

Update

In the more recent Pycharm versions (2019+) the interpreter icon now looks different:

Also in the unittest/pytest debugging UI the icon is placed first in the icon bar.

Process finished with exit code 137 in PyCharm

When I stop the script manually in PyCharm, process finished with exit code 137. But I didn’t stop the script. Still got the exit code 137. What’s the problem?

Python version is 3.6, process finished when running xgboost.train() method.

11 Answers 11

Trending sort

Trending sort is based off of the default sorting method — by highest score — but it boosts votes that have happened recently, helping to surface more up-to-date answers.

It falls back to sorting by highest score if no posts are trending.

Switch to Trending sort

If you didn’t manually stop the script and still got this error code, then the script was killed by your OS. In most of the cases, it is caused by excessive memory usage.

Process finished with exit code 137 (interrupted by signal 9: SIGKILL) Interestingly this is not caught in Exception block either

If you are in Ubuntu, increase the SWAP memory. It will work. Use htop to see SWAP usage, when it is full, it will give error 137.

It’s not always a memory issue. In my case subprocess.Popen was utilized and it was throwing the error as 137 which looks like signalKILL and the cause is definitely not the memory utilization, because during the runtime it was hardly using 1% of memory use. This seems to be a permission issue after more investigation. I simply moved the scripts from /home/ubuntu to the root directory.

I had the same error. In my case was related to excessive memory usage. Solved after reseting/cleaning my cache data adding the following code for every variable that will not be used anymore :

I’ve recently run into this error installing PyCharm on an M1 Mac Mini. It was accompanied by an error that said my SDK was invalid upon compilation of a project. It turns out this was due to my Python Interpreter being pointed at a strange directory, I’m not 100% how this happened.

I went to Preferences > Project:yourProject > Python Interpreter and selected a valid SDK from the drop-down (in my case Python 3.8). You’ll know the package is valid because it will populate the package list below with packages.

Again, not sure how it happened on install, but this solved it.

In my case, my RAM ran out, whether it is real or virtual.

Split your data into small pieces or expand your virtual memory.

I choose the latter.

Following scipts works on my ubuntu 20.04 TLS.

After you run your process, memory will grow.

Pycharm debugger instantly exits with 139 code

After upgrade from Pycharm 2017.2.3 to Pycharm 2017.1.4 Pycharm’s Debugger suggested to build cpython (or sth associated with it):

After I did this, Debugger now instantly returns this error:

Process finished with exit code 139 (interrupted by signal 11: SIGSEGV)

I found out that there was similar issue with cpython (https://youtrack.jetbrains.com/issue/PY-23273) but I cannot use the workaround mentioned there because I am missing the files it suggest to remove. I am not using cython, I wish I ignored this message about building it..

I am on linux ( SMP Debian 3.16.36-1+deb8u1 (2016-09-03) x86_64 GNU/Linux )

10 Answers 10

Trending sort

Trending sort is based off of the default sorting method — by highest score — but it boosts votes that have happened recently, helping to surface more up-to-date answers.

It falls back to sorting by highest score if no posts are trending.

Switch to Trending sort

I’ve fixed it by disabling PyQt compatible option in PyCharms’s debugger settings (Build, Execution, Deployment > Python Debugger). I don’t use PyQt, so I have not met any troubles

Check box Collect run-time types information for code insight.

This solved issues for me.

I had the same issue with 2018.3 after updating and installing Cython for fast debugging.

The issue was with gevent library.

Solved enabling Gevent compatible option and disabling PyQt compatible.

I solved the problem by making new python virtual environment and changing default Pycharm interpreter to it. Not the fastest solution I guess, but at least it worked.

Pycharm now again gives suggestions of building something for Cython, but now I just ignore it.

I agree with James.

I meet the same question as you after I install PYQT. After I uninstall pyqt by Pycharm’s «Preference->Project:your current project->Project Interpreter» find pyqt and push ‘-‘ button, the debug works.

What is interesting is that when I run a script which includes ‘from PyQt4 import QtGui’. The pyqt package installed auto. And the debug does not work again. So I uninstall pyqt again and debug works one more time!

i meet this problem, and i search for it a long time, all caused by the compatible of pyqt,So I think a good idea to solve it.

IntelliJ Process finished with exit code 0 when spring-boot run

I have a problem when starting spring-boot appication from IntelliJ-Idea. I don’t have this problem when running application through terminal.

I think this warn is not causing it. What may be the reason?

9 Answers 9

Trending sort

Trending sort is based off of the default sorting method — by highest score — but it boosts votes that have happened recently, helping to surface more up-to-date answers.

It falls back to sorting by highest score if no posts are trending.

Switch to Trending sort

Deleting provided scope of spring-boot-starter-tomcat dependency helps me.

I create a simple project from https://start.spring.io/ (sprint initializr) and added a simple controller to run the application.

but it wasn’t getting started because my pom wasn’t having

After adding this my application started.

Here are my pom dependencies:

Note: You may be not needing all the dependencies above.

Process finished with exit code 137 in PyCharm

When I stop the script manually in PyCharm, process finished with exit code 137. But I didn’t stop the script. Still got the exit code 137. What’s the problem?

Python version is 3.6, process finished when running xgboost.train() method.

11 Answers 11

Trending sort

Trending sort is based off of the default sorting method — by highest score — but it boosts votes that have happened recently, helping to surface more up-to-date answers.

It falls back to sorting by highest score if no posts are trending.

Switch to Trending sort

If you didn’t manually stop the script and still got this error code, then the script was killed by your OS. In most of the cases, it is caused by excessive memory usage.

Process finished with exit code 137 (interrupted by signal 9: SIGKILL) Interestingly this is not caught in Exception block either

If you are in Ubuntu, increase the SWAP memory. It will work. Use htop to see SWAP usage, when it is full, it will give error 137.

It’s not always a memory issue. In my case subprocess.Popen was utilized and it was throwing the error as 137 which looks like signalKILL and the cause is definitely not the memory utilization, because during the runtime it was hardly using 1% of memory use. This seems to be a permission issue after more investigation. I simply moved the scripts from /home/ubuntu to the root directory.

I had the same error. In my case was related to excessive memory usage. Solved after reseting/cleaning my cache data adding the following code for every variable that will not be used anymore :

I’ve recently run into this error installing PyCharm on an M1 Mac Mini. It was accompanied by an error that said my SDK was invalid upon compilation of a project. It turns out this was due to my Python Interpreter being pointed at a strange directory, I’m not 100% how this happened.

I went to Preferences > Project:yourProject > Python Interpreter and selected a valid SDK from the drop-down (in my case Python 3.8). You’ll know the package is valid because it will populate the package list below with packages.

Again, not sure how it happened on install, but this solved it.

In my case, my RAM ran out, whether it is real or virtual.

Split your data into small pieces or expand your virtual memory.

I choose the latter.

Following scipts works on my ubuntu 20.04 TLS.

After you run your process, memory will grow.

pycharm error happening at random time: Process finished with exit code 134 (interrupted by signal 6: SIGABRT)

I am working with pycharm community on a tensorflow model with keras backend, sometimes this error appears in a random time, specially after I call pyplot and close the window:

After this error, I need to close the python console and load my data again which is time-consuming (the data is a big dataset and the memory usage is considerable)

How do I resolve this problem?

UPDATE: Here is the plot code:

I have PyCharm 2021.2.3(Community Edition)

I have the following packages installed:

1 Answer 1

Looks like this is part of an actively tracked issue with Tkinter in PyCharm. You can find the reference on the Pycharm’s developer’s issue tracker. The issue is undiagnosed, but if looking at similar problems with Tk on StackOverflow, one can see that it’s an issue with thread safety and/or multithreading.

All I can do is speculate as to the cause, which is not helpful, however, I can at least collate the suggested workarounds:

Switch to a different Matplotlib backend (See docs: What is a backend?). Such as Qt5, but you will need to make sure they are available in your environment.

This approach is the most promising as other backends are better able to deal with not being the main thread or are explicitly safe for multi-threading. It’s also the simplest unless you have a really specific reason for preferring TkAgg.

Do not use the debugger with interactive plots.

Set «Variables Loading Policy» to «Synchronously» in Debugger as suggested by a PyCharm dev in the linked issue.

Enable «Scientific mode» in Pycharm.

More esoteric workarounds such as closing your figures within the code before drawing the second one. Example, after plotting the first figure:

As per speculation to the cause, maybe PyCharm’s debugger is kicking Tk off the main thread or runs it in a worker thread that is closed while the figure is still active or rendered.

Finally, please also take a look at the relevant documentation for Matplotlib, as your code example does not follow their recommended usage patterns. Specifically, learn about the differences between object oriented and the pyplot approach from the link. Possibly, somewhat unlikely, if the code stuck to recommended ways of using Matplotlib as highlighted in their tutorial documents, the error might not appear. This is just speculation.

Python program compilation issue

Process finished with exit code 0” in the course of running a Python file with JetBrains PyCharm Community Edition 2019.2.

Nothing compiles except for “Process finished with exit code 0” message generated by PyCharm I have an IntelliJ IDEA installed on the same PC and it works fine so I guess this is not an antivirus blocking related issue. Could you please advise? Thank you in advance 😊

2 Answers 2

Trending sort

Trending sort is based off of the default sorting method — by highest score — but it boosts votes that have happened recently, helping to surface more up-to-date answers.

It falls back to sorting by highest score if no posts are trending.

Switch to Trending sort

Assuming that you’re looking to get things working within a single file, I would suggest adding the following to the bottom of your file:

This will cause a new instance of the Dog class to be created when the script is run, you should then see your print statements output to the console.

If your code is indented in the way shown in the original question, then the problem is with the indentation. Currently almost all of the code is sitting within the Dog class, and not at file-level, so it won’t be running when the script is executed, your formatting would need to look like this:

«Process finished with exit code 132 (interrupted by signal 4: SIGILL)» when importing numpy or pandas in Pycharm

I am having this issue when running my code in PyCharm. other of my codes where I don’t import pandas or NumPy work fine.

I have tried the suggested solution in this previous question in my terminal:

But I get the following error:

ERROR: Could not build wheels for numpy which use PEP 517 and cannot be installed directly

I am stock and don’t know what to do from here.

1 Answer 1

Thanks to some comments above, I managed to find the solution.

First thing, I opened other projects where I import pandas and numpy. I ran one of the codes and all worked.

Then I compare the versions of the libraries (numpy and pandas) between environments. The versions of the environment I was having issues were not up to date. So I went to the terminal, I activate the environment with the problem and I installed the same versions in other environments

Process finished with exit code 137 in PyCharm

When I stop the script manually in PyCharm, process finished with exit code 137. But I didn’t stop the script. Still got the exit code 137. What’s the problem?

Python version is 3.6, process finished when running xgboost.train() method.

11 Answers 11

Trending sort

Trending sort is based off of the default sorting method — by highest score — but it boosts votes that have happened recently, helping to surface more up-to-date answers.

It falls back to sorting by highest score if no posts are trending.

Switch to Trending sort

If you didn’t manually stop the script and still got this error code, then the script was killed by your OS. In most of the cases, it is caused by excessive memory usage.

Process finished with exit code 137 (interrupted by signal 9: SIGKILL) Interestingly this is not caught in Exception block either

If you are in Ubuntu, increase the SWAP memory. It will work. Use htop to see SWAP usage, when it is full, it will give error 137.

It’s not always a memory issue. In my case subprocess.Popen was utilized and it was throwing the error as 137 which looks like signalKILL and the cause is definitely not the memory utilization, because during the runtime it was hardly using 1% of memory use. This seems to be a permission issue after more investigation. I simply moved the scripts from /home/ubuntu to the root directory.

I had the same error. In my case was related to excessive memory usage. Solved after reseting/cleaning my cache data adding the following code for every variable that will not be used anymore :

I’ve recently run into this error installing PyCharm on an M1 Mac Mini. It was accompanied by an error that said my SDK was invalid upon compilation of a project. It turns out this was due to my Python Interpreter being pointed at a strange directory, I’m not 100% how this happened.

I went to Preferences > Project:yourProject > Python Interpreter and selected a valid SDK from the drop-down (in my case Python 3.8). You’ll know the package is valid because it will populate the package list below with packages.

Again, not sure how it happened on install, but this solved it.

In my case, my RAM ran out, whether it is real or virtual.

Split your data into small pieces or expand your virtual memory.

I choose the latter.

Following scipts works on my ubuntu 20.04 TLS.

After you run your process, memory will grow.

PyCharm Django project fails to run with debugging

For quite a while I have this weird problem on my Windows 10 machine. When trying to launch a Django server with (and sometimes even without) debugging on PyCharm, I get this error:

That’s how it looks without debugging:

The strangest thing is that if I re-run, some of the times (1 success in about 4-6 reruns) it will launch successfully. I also couldn’t reproduce this problem without PyCharm.

Specs: Windows 10 Pro, Pycharm (this happens on versions 5.x through 2016.3) x86 and x64 versions, Python 3.5x, Django 1.8-1.10.x.

Any ideas why this happens or how to get some more detailed info about the crash?

EDIT This is what the Event Viewer reports about the error:

EDIT 2 I’ve narrowed down the problem. The error appears to originate from restart_with_reloader in autoreload.py after this statement:

Maybe someone from the Python community has seen something similar?

Не выводятся данные, выводит только Process finished with exit code 0. Python

Python. Не выводятся данные, выводит только Process finished with exit code 0

1 ответ 1

В строке с return cars вы просто возвращаете значение, которое потом не используете (в последней строке parse() ). Попробуйте заменить return cars на print(cars) или в последней строке parse() на print(parse()) :

Всё ещё ищете ответ? Посмотрите другие вопросы с метками python python-3.x парсер web-scraping или задайте свой вопрос.

Похожие

Подписаться на ленту

Для подписки на ленту скопируйте и вставьте эту ссылку в вашу программу для чтения RSS.

Нажимая «Принять все файлы cookie» вы соглашаетесь, что Stack Exchange может хранить файлы cookie на вашем устройстве и раскрывать информацию в соответствии с нашей Политикой в отношении файлов cookie.

Comments

idohi commented Nov 1, 2018 •

Bug report

Is there properly solution like new matplotlib version with a fix for this issue?

Code for reproduction

Actual outcome

Code with work a round

Expected outcome

Matplotlib version

The text was updated successfully, but these errors were encountered:

jklymak commented Nov 1, 2018

Don’t see how we can help with this. Whatever backend pycharm uses must be causing the problem. If you can isolate an issue to matpltolob feel free to reopen.

tacaswell commented Nov 1, 2018

@idohi Do you get any traceback or just the non-zero exit code?

I am confused by your suggested fix though as the matplotlibrc file is not interpreted as python code so adding those lines should have no effect.

ImportanceOfBeingErnest commented Nov 1, 2018

I noted that you report the backend to be Qt5Agg and your python version as 2.7. While it seems possible to get pyqt5 running on py2, this is pretty non-standard and would require a lot of tweaks and a manual build process (as far as I know).
I think pandas tries to import matplotlib at some point (they wanted to get rid of that, but that just broke at lot), and when matplotlib cannot load the qt5agg backend, because pyqt5 is not installed or worse, half-installed, it might fail with a non-zero exit code. There might be some traceback hidden, which PyCharm does not display?

idohi commented Nov 1, 2018

Running Python package unit tests in PyCharm

I just ‘ported’ a Python package I’m writing to PyCharm and having a bit of trouble running unit tests for the whole package from the IDE.

In __init__.py for the package I have load_tests function that goes over all modules in the package and loads relevant tests. It runs splendidly with:

However, when I try running it from PyCharm (by selecting the top directory in the Projects window and hitting Ctrl + Shift + F10 ) I get No tests were found in the Run window, and

in the console window.

I took a quick look at PyCharm’s utrunner.py and it seems that it is looking for modules with a certain pattern (that start with test). I would like to preserve the present vanilla approach. How can I configure PyCharm to use load_tests from __init__.py while modifying the code as little as possible?

By the way, test suites for individual modules run just fine from PyCharm.

Using PyCharm 3.1 Community Edition, Python 2.7.

Interacting with program after execution

In PyCharm, after I run a script it automatically kills it:

Process finished with exit code 0

How can I interact with the script after it starts? For lack of a better way to phrase it, how can I get the

prompt after the script runs once through?

3 Answers 3

Trending sort

Trending sort is based off of the default sorting method — by highest score — but it boosts votes that have happened recently, helping to surface more up-to-date answers.

It falls back to sorting by highest score if no posts are trending.

Switch to Trending sort

in Pycharm, Run/Debug menu choose Edit Configuration, check the box before ‘Show command line afterwards’

-i : inspect interactively after running script; forces a prompt even if stdin does not appear to be a terminal; also PYTHONINSPECT=x

To set interpreter option in PyCharm go to Run|Edit Configuration

Kivy window not opening up when i hit run, getting Process finished with exit code 0

Heres my py file called loginscreen.py

here’s my kivy file called loginscreen.kv:

And here’s my terminal output:

Can someone explain to me why i cant get the kivy window to open when i hit run? on my main.py file, the window opens just fine, but not this one. What gives?

2 Answers 2

Trending sort

Trending sort is based off of the default sorting method — by highest score — but it boosts votes that have happened recently, helping to surface more up-to-date answers.

It falls back to sorting by highest score if no posts are trending.

Switch to Trending sort

You didn’t write any code that would start the app. Write loginscreen().run() at the bottom of the file, not within the on_start method as nothing will ever call that (nor would it make sense to start one app within the on_start of another).

Haha, My man, the answer is simple. Focus on the 4th line of code. Python is all about indentation (Spaces)

You see, the error is that you put loginscreen().run() inside the loginscreen() class. Hence the interpreter couldn’t read it. You need to put it outside the class.

A better way to write this code would be:

Adding the main class removes clutters and clarifies code a lot.

There’s another error in your kivy file: Under screen 2 You have put an extra » after the MDLabel text. Remove that to avoid any future error

Process finished with exit code 103

So I was on pycharm and I made a new file to put some code in, but when I ran the code it said «No Python at ‘file_name'» Underneath in the terminal it also said «Process Code finished with exit code 103». Anyone know what that means?

2 Answers 2

Trending sort

Trending sort is based off of the default sorting method — by highest score — but it boosts votes that have happened recently, helping to surface more up-to-date answers.

It falls back to sorting by highest score if no posts are trending.

Switch to Trending sort

Go to the directory where you installed python, usually C:\\pythonX and copy everything to C:\Users\ACCOUNT-NAME\AppData\Local\Programs\Python\PythonX

It means your Pycharm is trying to access python interpreter but unable to locate it or installation of virtual python interpreter was not completed or installed properly.

Follow these steps

Why does loading tensorflow on Mac lead to «Process finished with exit code 132 (interrupted by signal 4: SIGILL)»?

I am using a MacBook Pro with M1 processor, macOS version 11.0.1, Python 3.8 in PyCharm, Tensorflow version 2.4.0rc4 (also tried 2.3.0, 2.3.1, 2.4.0rc0). I am trying to run the following code:

This causes the error message:

The code runs fine on my Windows and Linux machines. What does the error message mean and how can I fix it?

5 Answers 5

Trending sort

Trending sort is based off of the default sorting method — by highest score — but it boosts votes that have happened recently, helping to surface more up-to-date answers.

It falls back to sorting by highest score if no posts are trending.

Switch to Trending sort

Seems that this problem happens when you have multiple python interpreters installed, and some of them are for differente architectuers (x86_64 vs arm64). You need to make sure that the correct python interpreter is being used, if you installed Apple’s version of tensorflow, then that probably requires an arm64 interpreter.

If you use rosetta (Apple’s x86_64 emulator) then you need to use a x86_64 python interpreter, if you somehow load the arm64 python interpreter, you will get the illegal instruction error (which totally makes sense).

If you use any script that installs new python interpreters, then you need to make sure the correct interpreter for the architecture is installed (most likely arm64).

Overalll I think this problem happens because the python environment setup is not made for systems that can run multiple instruction sets/architectures, pip does check the architecture of packages and the host system but seems you can run a x86_64 interpreter to load a package meant for arm64 and this produces the problem.

For reference there is an issue in tensorflow_macos that people can check.

Exit code 137 when running tennis_question_typology.py #19

Comments

lindieee commented Jan 20, 2019

Hi,
when running tennis_question_typology.py in PyCharm I always get the error message «Process finished with exit code 137. Interrupted by signal 9: SIGKILL.» The error occurs when the list «spacy_objs» is dumped with pickle and written to spacy.pk:

Exit code 137 seems to be an out of memory problem. But I have 16 GB RAM and I already increased the max memory size that PyCharm is allowed to use in the PyCharm settings. So I do not see how memory can be a problem here.

Is it still possible that the corpus file is just too big?

The text was updated successfully, but these errors were encountered:

jpwchang commented Jan 24, 2019

Regardless of which issue is leading to the error you’re seeing, the root cause is in the SpaCy dependency. SpaCy 2.0, which we upgraded to last year, contains a lot of really useful changes but also introduces an issue with memory usage on large datasets (see this github issue). This causes the spacy_objs object to eat much more memory than it really needs to, and by extension causes the pickled object to be much larger than needed. Thankfully, there is a workaround for this, which we have implemented and will be rolling out in the 2.0 release.

calebchiam commented Jun 14, 2019

Hi! This has been fixed as of the release of ConvoKit 2.0 a little over a month ago. We no longer include tennis_question_typology.py in the repo as an example (because of redundancy), but the streamlined Transformer interface of QuestionTypology makes it easy to apply the QuestionTypology extraction to any corpus.

If you are still interesting in running tennis_question_typology.py, this updated code will do the job:

Hope this was helpful, and thanks for raising the issue.

Footer

© 2022 GitHub, Inc.

You can’t perform that action at this time.

You signed in with another tab or window. Reload to refresh your session. You signed out in another tab or window. Reload to refresh your session.

Pycharm win32api module install Error: Non-zero exit code (1)

so i got this problem when I try to: import win32api on my Pycharm project.py code. I got this error: Non-zero exit code (1)

I also tried with pypiwin32 and I still got the same error.

What is strange is when I executed the pip install pypiwin32 command on my CMD the instalation of pypiwin32 worked. But it still doesnt work on Pycharm. Thanks for the help

1 Answer 1

Looks like you’re having trouble finding the win32api module.

Don’t worry. I will help you solve this issue.

If you don’t know how to activate, please refer these links below:

Second, when you create the project, please choose New environment using Virtualenv.

Then select Inherit global site-packages and Make available to all projects and press Create button.

This is a screensnap for reference.

Third, you need to edit configuartions.

Finally, after everything is configured, it can work well.

Pycharm: [CRITICAL] [App ] Unable to get a Window, abort

Im pretty new to python and the pycharm IDE in particular. I want to learn using kivy.

I try to run the following piece of code using pycharm, and get an error:

This is the error:

On the other hand, when I use the spyder IDE everything runs correctly. I would appreciate help to solve this issue.

1 Answer 1

Now. It seems that you might have a problem with SDL2 dependancy.

Have you upgraded Kivy, python or pygame? Try a new environment (with virtualenv or venv), brand new python and kivy. Make sure all the dependancies are installed successfully.

Back in previous versions, kivy would create the window using Pygame (not sure this is still the case). But avoiding calling «import Kivy» and «import Pygame» might do you some good.

Import only the methods you need from them.

Почему падает программа с ошибкой 1073741845?

Работаю в PyCharm, Python 3, пытаюсь получить путь к файлу с помощью данного кода

При работе открывается окно выбора, но если выбрать файл или нажать отмена или закрыть окно, программа падает с ошибкой

Process finished with exit code 1073741845

2 ответа 2

Всегда запускайте приложение в CMD/консоли/терминале и вы получите реальную ошибку.

Класс QPlainTextEdit предоставляет виджет, который используется для редактирования и отображения простого текста.
Больше https://doc.qt.io/qt-5/qplaintextedit.html#appendHtml

void QPlainTextEdit::appendHtml(const QString &html)

Добавляет новый абзац с HTML в конец редактирования текста.

Pycharm debugger error

I am trying to run the pycharm debugger but he not working, for all my files (which he work for them last night) this is the erorr:

2 Answers 2

Trending sort

Trending sort is based off of the default sorting method — by highest score — but it boosts votes that have happened recently, helping to surface more up-to-date answers.

It falls back to sorting by highest score if no posts are trending.

Switch to Trending sort

I was stuck on the same issue for a while, but reading over these two threads at the developer’s site made me find the issue:

In my case, it was because the Breakpoints setting had become incorrect somehow. To fix it, go to the Breakpoints menu by clicking here (or CTRL+SHIFT+F8):

Then set the settings to something like this. The top option Enabled was disabled in my case.

After this, it worked as usual in my case.

Strange error while using Pycharm to debug PyQt gui

I’ve been using PyCharm to debug my gui in PyQt. This has been really successful thus far, until I’ve run into a strange error in trying to debug my gui just now. I’ve set a breakpoint at the beginning of the script as well as at various points but the program does not have a chance to get to this point. I’ve also tried removing all the breakpoints and running the debug but get the same result. The full traceback is:

Does anyone know what is causing this error and how it can be resolved? When I run the code normally (without debugging) I do not run into any of these errors.

2 Answers 2

Trending sort

Trending sort is based off of the default sorting method — by highest score — but it boosts votes that have happened recently, helping to surface more up-to-date answers.

It falls back to sorting by highest score if no posts are trending.

Switch to Trending sort

So, renaming your code directory to something else, should fix the issue and let you keep the init file.

Python

When a module named spam is imported, the interpreter first searches for a built-in module with that name. If not found, it then searches for a file named spam.py in a list of directories given by the variable sys.path. sys.path is initialized from these locations:

The directory containing the input script (or the current directory when no file is specified).

PYTHONPATH (a list of directory names, with the same syntax as the shell variable PATH).

The installation-dependent default.

PyCharm

When running a PyCharm configuration, PyCharm (simplified) launches project interpreter on the configured script. This works. In my case it’s:

However when debugging the same configuration, things are a bit more complicated. The simplified version:

A server is created (by pydevd) that executes the target script

PyCharm IDE connects to that server in order to get output

Again, in my case it’s:

The key point is somewhere at the beginning of pydevconsole.py (which is mentioned in the exception traceback):

So, it tries to load the InteractiveConsole, which (obviously) fails.
Apparently, the code module is specific to CPython. Its absence means that it another distribution (check [Python]: Alternative Python Implementations).
The IPython alternative (selected by default) contains scripts that are not Python 3 (syntactically) compliant (at the current point IronPython is at v2.7.9). Note that this happens before even reaching user code.
Switching the interpreter to Python 2 won’t help either, it will pass this point, but later it will also try to setup the interactive console, which will fail.

PyCharm Python project нет такого файла или каталога

при попытке запустить проект в PyCharm я получаю следующую ошибку. Я установил virtualbox, vagrant и все требования в файле readme, которые они мне дали, но при нажатии run.

[EDIT] Похоже, что сопоставления VM vagrant неправильно настроены / установлены.

любые идеи, почему это сводит меня с ума?

Я использую Mac OS X 10.9.2 и последнюю версию PyCharm IDE.

5 ответов

другой способ добавить корневой контекст проекта в настройках.

Я получаю эту проблему всякий раз, когда я перемещал папку проекта. Я обнаружил, что проблема в том, что сопоставленная папка на виртуальной машине больше недоступна; ls показывает что-то вроде ниже:

эта проблема обычно возникает, когда u обновляет версию python и удаляет старый dir python.

может быть, u может решить проблему, создав новый проект с pycharm и скопируйте все файлы в скрытый каталог с именем «.идея» в новом проекте реж ваших старых проектов «/.идея » dir，и выберите заменить.

надеюсь, это может помочь, и простите мой бедный английский

поскольку вы упомянули, что ваша настройка включает виртуальную коробку и Бродягу, вы возможно, потребуется обновить сопоставления путей в вашем Vagrantfile. В моем случае добавление синхронизированных путей между хостом и бродягой, как

тогда a vagrant reload и перезапуск Pycharm решить проблему.

interactive shell debugging with pycharm

I am new to PyCharm. I have been using IDLE for a long time.

It is very convenient to use Python objects after script execution in IDLE. Is there any way to use script objects after its execution with interactive python shell using PyCharm?

For example, we have a ‘test’ project with one file ‘test.py’:

after execution we can get the result:

How can I use string ‘a’ with interactive shell?

Added after 8 years. My pycharm tutorial in russian: https://youtu.be/-RzKJlLXw54

9 Answers 9

Trending sort

Trending sort is based off of the default sorting method — by highest score — but it boosts votes that have happened recently, helping to surface more up-to-date answers.

It falls back to sorting by highest score if no posts are trending.

Switch to Trending sort

Built-in python shell for the current debugging session

This will enable a python shell (notice the green >>> on the screenshot) where you can access all the variables in the current scope, and do everything you usually do in the Python shell.

In recent pycharm versions you get the full ipython interpreter instead of the plain python shell (if ipython is installed).

The Evaluate expression window

Multiple and multiline expressions are supported: to get a multiline version of the Inspect dialog click the Code fragment mode or select more than one line of code in the editor and then evaluate the expression. You can assign values to existing variables (new ones cannot be defined), and run entire chunks of code.

Mouse hover over variables

To see the value of a variable after you hit a breakpoint in debug mode, hover the mouse pointer over the variable (1-2 seconds) and the value will be shown in a tooltip.

The hint will contain a ➕ icon — clicking it will open the inspector in a popup.

For the variables in scope the inspector is shown in the bottom panel under Debug > Debugger.

For pandas data frames you will see a View as DataFrame link in the variable inspector panel or in the hover popup — clicking the link will display the dataframe as a table in the Data View panel.

Update

In the more recent Pycharm versions (2019+) the interpreter icon now looks different:

Also in the unittest/pytest debugging UI the icon is placed first in the icon bar.